31 results (0,14024 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo Auto-Aligning Beam Detector Extension Kit 100m 29600-526

Apollo Auto-Aligning Beam Detector Extension Kit 100m 29600-526

Apollo Auto-Aligning Beam Detector Extension Kit 100m 29600-526100m Extension Kit for the Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 141.96
1

Apollo XPander 868MHz Diversity Survey Kit XPA-TE-14075-APO

Apollo XPander 868MHz Diversity Survey Kit XPA-TE-14075-APO

Apollo XPander 868MHz Diversity Survey Kit XPA-TE-14075-APOThe XPander Diversity Survey kit is used at the site survey stage to ascertain if a site is suitable for an XPander installation. A site survey must be carried out before XPander can be installed. The Diversity Survey Kit is compliant to BS 5839-1.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesIndicates the suitability of proposed device location

GBP 369.71
1

Apollo Deckhead Mounting Box Accessory Kit 45681-218APO

Apollo Deckhead Mounting Box Accessory Kit 45681-218APO

Apollo Deckhead Mounting Box Accessory Kit45681-218APOThe Deckhead Mounting Box is used on its own in most cases but there are applications where either an extension sleeve or an adaptor ring is required. The Extension Sleeve is required when fitting heater or deep bases the Adaptor Ring is needed for fitting sounder bases beacon bases or sound beacon bases. The Extension Sleeve and the Adaptor Ring are sold as an Accessory Kit.

GBP 5.46
1

Apollo RW1800-060APO Reach Survey Kit Lite

Apollo RW1800-060APO Reach Survey Kit Lite

Apollo RW1800-060APO Reach Survey Kit LiteThe RW1800-060APO is a portable battery-powered toolkit for surveying signal strength of the REACH Wireless system ahead of installation into a building.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesIncludes 1x network host device 1x field-device 1x extendable detector mounting poleField-device includes an RGB LED for signal strength indicationBi-directional wireless communicationDual channel redundancy

GBP 311.16
1

Apollo 29600-799 Talentum Test Torch

Apollo 29600-799 Talentum Test Torch

Apollo 29600-799 Talentum Test TorchThe Talentum Test Torch recreates the characteristic spectrum of a flame using a combination of UV and IR bulbs. Once testing is complete the Test Torch can store your test results for download to a PC.The Talentum Test Torch is a test and calibration unit designed to work with the full range of Apollo flame detectors.Using the intuitive menu choose the type of flame detector to be tested squeeze the trigger and the unit will automatically perform a test from a distance of up to 6 metres which means that in many applications the flame detector can be tested from ground level.The unit recreates the characteristic spectrum of a flame using a combination of UV and IR bulbs. Once testing is complete the Test Torch can store your test results for download to a PC. The Test Torches integral battery is recharged via USB from either a PC or an off the shelf USB charger.Key Features1m to 6m testing rangeAccurately simulates a pan fireOperating temperature -10C to 55C

GBP 2340.00
1

Apollo Orbis TimeSaver Diode Base - ORB-DB-00003-APO

Apollo Orbis TimeSaver Diode Base - ORB-DB-00003-APO

Apollo Orbis TimeSaver Diode Base - ORB-DB-00003-APOThe TimeSaver Diode Base has the same design as the standard TimeSaver Base with the addition of a diode. It is used in systems whichuse active EOL monitoring for head removal.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningOther devices continue to work during unauthorised removal of detectors

GBP 3.54
1

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeatThe Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat uses advanced dual optical sensing technology to accurately detect smoke particles entering the chamber and a central heat thermistor for detecting heat. It has five different operating modes giving you the option to adapt the detector to suits it environment.Key Features of the SA5100-710APOAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 48.30
1

Apollo Orbis I.S. Multi-sensor Detector ORB-OH-53027-APO

Apollo Orbis I.S. Multi-sensor Detector ORB-OH-53027-APO

Apollo Orbis I.S. Multi-sensor Detector ORB-OH-53027-APOThe Orbis I.S. Multi-sensor Detector benefits from the same false alarm reduction technology as the optical detector. It is a thermally enhanced smoke detector and so will not give an alarm from heat alone.Key Features Reduces false alarms.Sensitive to fast burning flaming fires.Improved sensitivity to black smoke.Compensation for slow changes in sensitivity.Algorithms for reliability of alarm.Brand InformationTimeSaver BasePatented FasTest enabling functional testing in four secondsDirtAlert indicates limit of drift compensationTolerates extreme operating conditions -40C to 70 CFalse alarm reductionFlashing LED option

GBP 101.82
1

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor DetectorOpticalHeatThe Soteria Multi-Sensor Detector uses advanced opticalsensing technology PureLight to detect smoke particles entering the chamberand is fitted with two thermistors for detecting heat. It easily discriminatesagainst false alarm stimuli and is a great environmentally friendly alternativeto ionisation detectors.Key FeaturesFive modes of operation for ultimate fire detection andfalse alarm management in a wide range of applicationsUtilises digital Core Protocol communications providing arange of advanced fire detection featuresA sophisticated dynamic algorithm providing transientrejection and compensation for drift while maintaining accurate sensitivityFasTest for quicker testing of detectorsIntegrated switchable isolator

GBP 56.16
1

Apollo 58002-350APO Discovery Base Sounder Visual Indicator White Flash

Apollo 58002-350APO Discovery Base Sounder Visual Indicator White Flash

Apollo 58002-350APO Discovery Base Sounder Visual Indicator White FlashThe Discovery Base Sounder Visual Indicator is available in white or red flash versions and can either be used with an Apollo addressable detector or as a stand-alone device with a base capThe Discovery Base Sounder Visual Indicator includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.Key FeaturesSimple installation using an XPERT 8 baseAdjustable tone and volume 15 tone pairs 7 volume settingsBuilt-in isolator when used with XPERT 8 BaseUnique acoustic self testSet-up and testing of devices at point of installationIndependent control of sounder and visual indicatorAvailable in red or white flash

GBP 57.83
1

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCOThe Soteria Tri-Sensor Detector Dual OpticalHeatCO uses advanced dual optical sensing technology to accurately detect smoke particles and discriminate against false alarm stimuli. It has a centrally located heat thermistor along with a CO sensor giving you three methods of detection.The detector can operate in 5 modes of sensitivity.Soteria detectors have been designed to operate on Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on Discovery bases XPERT 7 Intelligent Mounting Base.Key FeaturesAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 67.08
1

Apollo 58002-351APO Discovery Base Sounder Visual Indicator Red Flash

Apollo 58002-351APO Discovery Base Sounder Visual Indicator Red Flash

Apollo 58002-351APO Discovery Base Sounder Visual Indicator Red FlashThe Discovery Base Sounder Visual Indicator is available in white or red flash versions and can either be used with an Apollo addressable detector or as a stand-alone device with a base capThe Discovery Base Sounder Visual Indicator includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.Key FeaturesSimple installation using an XPERT 8 baseAdjustable tone and volume 15 tone pairs 7 volume settingsBuilt-in isolator when used with XPERT 8 BaseUnique acoustic self testSet-up and testing of devices at point of installationIndependent control of sounder and visual indicatorAvailable in red or white flash

GBP 57.83
1

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features suchas group global and individual control status reporting and selectable toneand volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volumelevelsSoftware defined group addressing with up to 16 groupaddressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body WhiteFlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo XP95 Sounder VAD Base DIN-Tone with Isolator 45681-707APO

Apollo XP95 Sounder VAD Base DIN-Tone with Isolator 45681-707APO

Apollo XP95 Sounder VAD Base DIN-Tone with IsolatorThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.Maintenance ServiceDetectors should be maintained according to BS 5839-1 or other locally applicable code. Test equipment can be ordered from Apollo for testing smoke and heat detectors. Detectors should not be cleaned in the field except for careful removal of exterior dirt with a damp cloth. For cleaning and recalibration detectors should be returned to Apollo Fire Detectors or to the local distributor.Key FeaturesEN 54-23 Certified Category O VAD0.5Hz Flash Rate whiteSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt-in isolatorEN 54-3 Certified Sounder

GBP 83.74
1

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APO

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APO

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesTimeSaver BasePatented FasTest enabling functional testing in four secondsDirtAlert indicates limit of drift compensationTolerates extreme operating conditions -40C to 70 CFalse alarm reductionFlashing LED option

GBP 77.36
1

Apollo Orbis Marine TimeSaver Base ORB-MB-00001-MAR

Apollo Orbis Marine TimeSaver Base ORB-MB-00001-MAR

Apollo Orbis Marine TimeSaver Base ORB-MB-00001-MARThe Orbis Marine TimeSaver Base provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure. Orbis Marine conventional fire detectors offer a wealth of features to save time enhance reliability and reduce false alarms within the marine environment.These include drift compensation and DirtAlert a feature that warns Service Engineers via a flashing yellow LED that detectors need maintenance and patented FasTest a procedure that takes just four seconds to test smoke detectors and confirm that they are functioning correctly.Key FeaturesGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanismBrand FeaturesApproved for use in marine environmentsModern low-profile designTimeSaver Base for fast installationTransient rejection for false alarm reductionHigh humidity tolerance at up to 98 RHWide operating temperature -40C to 70C

GBP 5.81
1

Apollo Orbis Marine Relay Base ORB-RB-40004-MAR

Apollo Orbis Marine Relay Base ORB-RB-40004-MAR

Apollo Orbis Marine Relay Base ORB-RB-40004-MARThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state the relay is energized causing the contact to change state. The contact will remain in this condition until the detector is reset.Brand InformationOrbis Marine conventional fire detectors offer a wealth of features to save time enhance reliability and reduce false alarms within the marine environment. These include drift compensation and DirtAlert a feature that warns Service Engineers via a flashing yellow LED that detectors need maintenance and patented FasTest a procedure that takes just four seconds to test smoke detectors and confirm that they are functioning correctly.Key FeaturesGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism

GBP 27.31
1

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APO

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APO

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APOThe TimeSaver Relay Base incorporates a single-pole voltage-free changeover contact for switching external equipment. When the detector changes to the alarm state the relay is energised causing the contact to change state. The contact will remain in this condition until the detector is reset.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A

GBP 17.98
1

Apollo End-to-End Optical Beam Detector 29600-929

Apollo End-to-End Optical Beam Detector 29600-929

Apollo End-to-End Optical Beam Detector 29600-929The Conventional End-to-End Optical Beam Detector has been designed using the latest optical technology incorporating modern industrial electronic and software techniques. This detector offers cost effective protection of large open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The Conventional End-to-End Optical Beam Detector is ideal for applications where line of sight for the IR infra-red detection path is narrow and where the building structure uses reflective surfaces. It has also been designed to be aesthetically pleasing and thus can equally suit modern architectural buildings as well as heritage sites particularly where ornate ceilings exist.Key FeaturesFull icon-based easy-to-use LCD display on the low level controller for ease of commissioning testing and maintenanceAesthetically pleasing to suit modern architectural buildings and heritage sitesRange 5 to 120 metresLaser assisted alignment combined with easy to use alignment LEDs enables installation by one operatorSeparate FireFault Relaysper DetectorSelectable sensitivitythreshold levelsAutomatic Gain control AGC for drift compensationAdjustment bracket offers up to 180 degrees movement in both planes and a full 360 degree rotation. It also fits 29600-524 and 29600-525 heads.

GBP 897.00
1

Apollo Deckhead Mounting Box 45681-217APO

Apollo Deckhead Mounting Box 45681-217APO

Apollo Deckhead Mounting Box 45681-217APOMechanical ConstructionThe Deckhead Mounting Box is used on its own in most cases but there are applications where either an extension sleeve or an adaptor ring is required. The Extension Sleeve is required when fitting heater or deep bases the Adaptor Ring is needed for fitting sounder bases beacon bases or sound beacon bases. Further details are given in the table below. The Extension Sleeve and the Adaptor Ring are sold as an Accessory Kit part no 45681-218.The Deckhead Mounting Box has 6 cable access ports for M20 glands and is secured to the mounting surface via two 5.4mm holes in the webs.Additional InformationFor more information refer to Installation Guide 39214-450 and Datasheets PP2364 PP2040.Safety NoteNOTES ON USE 1. Do not apply any sealing compound or use a gasket of any kind between the detector base and deckhead mounting box 2. Ensure that if a terminal block is fitted it does not contact or foul the detector base 3. Ensure that the mounting surface is flat and Level 4. Seal unused cable access ports with suitable blanking plugs. Sealing compound may be used provided that it does not at any time give off fumes or vapour which could affect any detector fitted to the base 5. The deckhead mounting box orientation should be such that the detector LED is facing the entrance to the protected areaProduct InformationThe Deckhead Mounting Box part no 45681-217 is a device which protects bases sounder bases and sounder beacon bases from the ingress of water or other liquids. It is screwed to the soffit and accepts a variety of Apollo bases.Key FeaturesProtects against water ingressImproved performanceAvailable in polycarbonate or metalPolycarbonate deckhead mounting box 45681-217 also fits Apollo audio visual bases when used with the accessory kit 45681-218Additional Information 3Weight of DeckheadMounting Box Backbox 100gExtension sleeve 23gAdaptor Ring 29g

GBP 12.54
1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02
1