358 results (0,16606 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo Xpander Diversity Loop Interface Unit - XPA-IN-14050-APO

Apollo Xpander Diversity Loop Interface Unit - XPA-IN-14050-APO

Please note The XPA-IN-14050-APO does not support CoreProtocol installations.Apollo Xpander Diversity Loop Interface Unit - XPA-IN-14050-APOThe XPander Diversity Loop Interface Unit can monitor up to 31 XPander devices and report each devices status to an intelligent fire control panel.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesConnects up to 31 XPander devices to an ApolloAddressable loopTranslates radio signals from XPander detectors to the fire control panelBuilt-in loop isolatorLoop-poweredDiversity aerial design for improved signal integrityThe entire XPander product line has a temporary four-month supply disruption starting from November 2021 with supply expecting to resume in February 2022.

GBP 337.68
1

Apollo XPander Remote Indicator Module - XPA-IN-14102-APO

Apollo XPander Remote Indicator Module - XPA-IN-14102-APO

Apollo XPander Remote Indicator Module - XPA-IN-14102-APODesigned and manufactured using the latest techniques and surface-mount technology to ensure component count is kept to a minimum whilst maximising reliability the XPander Remote Indicator Module is used to indicate the activation of an individual device or zone.Brand InformationThe device is powered by a low-voltage dual supply alkaline battery pack which has been tested to provide a five-year life at normal conditions 15C to 35C the condition of which is continually monitored. The system indicates the remaining battery capacity with a low battery condition being indicated as a fault allowing 30 days for the battery pack to be changed before unit failure occurs.An additional warning is also given seven days before unit failure occurs. Removal of the remote indicator from the fixing plate will indicate a fault condition. The device is fully compliant with EN 54-25 and incorporates a locking screw to prevent unauthorised removal.

GBP 209.51
1

Apollo XPander Dual Input Output Channel Unit - XPA-IN-14012-APO

Apollo XPander Dual Input Output Channel Unit - XPA-IN-14012-APO

Apollo XPander Dual Input Output Channel Unit - XPA-IN-14012-APOThe XPander InputOutput Unit is a radio based interface and offers two monitored input circuits and two relay outputs. It can be used for controlling fire doors fire dampers smoke vents and other fire engineering applications.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessMonitored switch circuitVoltage-free contacts Capable of switching up to 30V at 1AFive-year battery life using standard AA alkaline batteries

GBP 237.64
1

Apollo XPander Single Input Output Channel Unit - XPA-IN-14011-APO

Apollo XPander Single Input Output Channel Unit - XPA-IN-14011-APO

Apollo XPander Single Input Output Channel Unit - XPA-IN-14011-APOThe XPander InputOutput Unit is a radio based interface and offers two monitored input circuits and two relay outputs. It can be used for controlling fire doors fire dampers smoke vents and other fire engineering applications.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessMonitored switch circuitVoltage-free contactsCapable of switching up to 30V at 1AFiveyear battery life using standard AA alkaline batteries

GBP 198.37
1

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413

Apollo Blank XPert Card for XPander Wireless Range - White 29600-413The 29600-413 is a spare singular blank XPERT card in white which has been designed for use with the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.20
1

Apollo Mounting Plate for 4 Prisms 100m 29600-529

Apollo Mounting Plate for 4 Prisms 100m 29600-529

Apollo Mounting Plate for 4 Prisms 100m 29600-529Mounting Plate 4 Prisms.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 88.92
1

Apollo Blank XPert Card for XPander Wireless Range -Red 29600-399

Apollo Blank XPert Card for XPander Wireless Range -Red 29600-399

Apollo Blank XPert Card for XPander Wireless Range RedSpare singular blank XPERT card in red for the XPander range. XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop.XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Brand Featuresmodern styling loop-powered interface operating on 868MHz wireless addresses seen by control panel as normal addresses radio base with wireless circuitry and battery compartment chamber designed to inhibit dirt penetration and thus reduce false alarms automatic drift compensation with DirtAlert warning algorithms for transient alarm rejection FasTest reduces time taken to test detectors remote test facility 3-5 years battery lifeProduct InformationAddress card supplied with all bases. Using a coding guide pips are removed to set the address of the inserted device.Key FeaturesSimplifies and speeds up installation and commissioningAddress remains the same no matter how often detectors are replacedUses patented proven technologyFlexibility to create any address

GBP 0.24
1

Apollo Beam Detector Surface Mounting Plate for Prisms 29600-528

Apollo Beam Detector Surface Mounting Plate for Prisms 29600-528

Apollo Beam Detector Surface Mounting Plate for Prisms 29600-528Surface Mounting Plate for Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 90.10
1

Apollo Mounting Plate for 1 Prism 8-50m 29600-530

Apollo Mounting Plate for 1 Prism 8-50m 29600-530

Apollo Mounting Plate for 1 Prism 8-50m 29600-530Mounting Plate 1 Prism for the Auto-Aligning Beam Detectors.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 84.24
1

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527Universal Bracket for the Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 164.20
1

Apollo Singular Transparent Hinged Cover for Apollo Call Point 44251-189APO

Apollo Singular Transparent Hinged Cover for Apollo Call Point 44251-189APO

Apollo44251-189APOSingular Transparent Hinged Cover for Apollo Call PointThe Apollo Transparent Hinged Cover has been designed to fit all Apollo manufactured Manual Call Points to provide protection against accidental operation. It prevents accidental activation of the alarm by enforcing a two-step action i.e. lifting the cover then activating the alarm.Key FeaturesUnobtrusiveTransparentProtects from accidental alarm activation

GBP 2.30
1

Apollo Discovery Marine Heat Detector 58000-400MAR

Apollo Discovery Marine Heat Detector 58000-400MAR

Apollo Discovery Marine Heat Detector 58000-400MARDiscovery Marine analogue addressable fire detectors are suitable for larger vessels. The high specification range has been developed to meet the requirements of sophisticated systems. Discovery gives you total reassurance in installations where it is necessary to adapt detection to different operating environments and where protection against unwanted alarms is paramount.The Discovery Marine Heat Detector uses a single thermistor to sense the air temperature at the detector position. The thermistor is connected in a resistor network which produces a voltage output dependent on temperature. The design of the resistor network together with the processing algorithm in the microcontroller gives an approximately linear characteristic from 10C to 80C. This lineariser signal is further processed depending on the response mode selected and converted to an analogue output.Key FeaturesApproved for use in the marine environmentFive response modes for environmental adaptationDaynight switching for increased flexibilityDrift compensation for false alarm reductionUser programmability for dataXPERT card addressing for increased securityIdeal in environments that are dirty or smokyUnaffected by wind or atmospheric pressureRemote test feature

GBP 64.84
1

Apollo Discovery Red Open-Area Sounder Beacon - 58000-005APO

Apollo Discovery Red Open-Area Sounder Beacon - 58000-005APO

Apollo Discovery Red Open-Area Sounder Beacon - 58000-005APOThe Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol andhas beendesigned for use in indoor and open areas. Whenthe fire system is being commissioned a Magnetic Wand can be used to adjust and test each sounder locally.Key Features 15 tone pairsIt is possible to set individual control of the sounder and visual indicatorVolume and tone settings can be selected from the control panelTones can be used forother purposes in addition to warning of fire making the device ideal for use in schools etc.Soft start option ideal for hospitals and nursing homesGroup and global control for increased response time

GBP 73.38
1

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APO

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APO

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APOThe Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 8mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders and up to 15 sounder beacons per loop on average.The maximum number of devices that may be connected to a particular loop should however be determined by a loop loading calculation using the Apollo Loop Calculator. Since the alarm devices are intended for use in open areas it is possible for more than one device to be audible at any given point in a building. For this reason the operation of all may be synchronised by the control panel.Key FeaturesSelf-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tones Individual and group addressingBuilt in isolator Red or white optionsLoop-poweredIP65 rated

GBP 44.81
1

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APO

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APO

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 8mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders and up to 15 sounder beacons per loop on average.The maximum number of devices that may be connected to a particular loop should however be determined by a loop loading calculation using the Apollo Loop Calculator. Since the alarm devices are intended for use in open areas it is possible for more than one device to be audible at any given point in a building. For this reason the operation of all may be synchronised by the control panel.Key FeaturesSelf-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 rated

GBP 69.17
1

Apollo Series 65 Relay Base 12v 45681-508APO

Apollo Series 65 Relay Base 12v 45681-508APO

Apollo Series 65 Relay Base 12v 45681-508The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a latching position. For security systems the jumper is moved to another position so that the base is non-latching.OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Mechanical ConstructionThe base is a white self-extinguishing polycarbonate moulding with zero-force nickel-plated steel terminals for attaching the detector. The moulding has an aperture to accept the locking grub screw built into the detector case. All electronic components including the relay are mounted on a PCB which is retained by two screws in the moulding.Product InformationThe Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a latching position. For security systems the jumper is moved to another position so that the base is non-latching.Key FeaturesDetector locking mechanismOne-way fitEasy to wireContains an earth connectorCan be used in fire and security systems

GBP 9.76
1

Apollo Weatherproof Manual Call Point Red 58100-950APO

Apollo Weatherproof Manual Call Point Red 58100-950APO

Apollo Weatherproof Manual Call Point Red 58100-950APOThe Apollo Waterproof Manual Call Point has been designed for use outdoors and in places where moisture can occur. A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated the Manual Call Point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.Key FeaturesIP 67 ratedPlug and play terminal connections for fast wiringContinuity link for wiring test before commissioningReports an alarm in under 0.2 secondsResettable element

GBP 168.37
1

Apollo Weatherproof Manual Call Point with Isolator Red 58100-951APO

Apollo Weatherproof Manual Call Point with Isolator Red 58100-951APO

Apollo Weatherproof Manual Call Point with Isolator Red 58100-951APOThe Apollo Waterproof Manual Call Point has been designed for use outdoors and in places where moisture can occur. A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated the Manual Call Point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.Key FeaturesIP 67 ratedPlug and play terminal connections for fast wiringContinuity link for wiring test before commissioningReports an alarm in under 0.2 secondsResettable element

GBP 236.18
1