ProfitSpring | B2B PPC Agency

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red FlashThe Conventional Open-Area Wall Sounder VAD is used to provide audible and visual warning of a fire. Combining an EN 54-3 compliant sounder with an EN 54-23 compliant VAD enables this device to be used in areas that require the use of both an audible and a visual alarm.Key FeaturesFor use outdoorsRed body with red flashConventional

GBP 176.29

1

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8The XP95 Open-Area Visual Alarm Devices VADs have been developed as primary or supplementary alarm devices. The loop powered VAD may be used in situations where there is a risk that sounders will not be heard. It might also be required where deaf or hearing impaired persons may be present.Key FeaturesHigh intensity red LEDsEN 54-23 compliant Category C VADCoverage C-3-8Flash Rate 0.5 HzFault signal if LED checked

GBP 45.24

1

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand-alone device.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of VAD flashIndividual and group addressingUnique VAD self-testLoop-poweredBuilt in isolator

GBP 58.67

1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02

1

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7The RW1500-220APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7The RW1500-210APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92

1

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APOThe Discovery Sounder VAD Base makes full use of the Discovery protocol. For ease of commissioning a Magnetic Wand can be used to test and adjust each sounder VAD locally.Key FeaturesEN54-23 certifiedFlash rate of 0.5HzIt is possible to set individual volume of the sounder from the panel15 pairs of tones including IMO code 1A General Emergency Alarm and IMO Code 2 All ClearBuilt in isolatorBrand InformationDiscovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber. In addition to the familiar smoke and heat detectors the Discovery range features two multisensor detectors. One is an opticalheat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxideheat multisensor which protects against both smouldering fires and those generating heat.OperationThe Discovery Multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor heat sensor. The Discovery OpticalHeat Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected.The five modes provide response behaviour which incorporates pure heat detection pure smoke detection and a combination of both. The multisensor is therefore useful over the widest range of applications. The signals from the optical smoke sensing element and the temperature sensor are independent and represent the smoke level and the air temperature respectively in the vicinity of the detector.The detectors micro-controller processes the two signals according to the mode selected. When the detector is operating as a multisensor the temperature signal processing extracts only rate-of-rise information for combination with the optical signal. In these modes the detector will not respond to a slow temperature increase even if the temperature reaches a high level. A large sudden change in temperature can however cause an alarm without the presence of smoke if sustained for 20 seconds.

GBP 78.12

1

Brand

Merchant

Price (EUR)