352 results (0,16604 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo Isolator XP95 and Discovery 55000-720APO

Apollo Isolator XP95 and Discovery 55000-720APO

Apollo Isolator XP95 and Discovery 55000-720APOThe Isolator is placed at intervals on the loop and ensures that in the case of a short circuit only the section between the isolators will be affected. When the short circuit is removed the isolators automatically restore power and data to the isolated section.Key Features Detects wiring short-circuitsMinimises disruption from short-circuitsAutomatic de-isolation on the short-circuit removalUp to 20 detectors or their equivalent load may be installed between isolators

GBP 18.46
1

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527Universal Bracket for the Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 164.20
1

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APO

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APO

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APOThe XPander Optical Smoke Detector works on the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessPerforms well in black and white smokeBi-directional radio communicationsXPERT card addressing systemFiveyear battery life using standard AA alkaline batteries

GBP 185.70
1

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and CS Heat DetectorXPA-CB-14022-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43
1

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and A1R Heat DetectorXPA-CB-14021-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43
1

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Sounder Beacon and Optical Smoke DetectorXPA-CB-14020-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectors remote test facility3-5 years battery life

GBP 370.69
1

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APO

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APO

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APOThe XPander Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor from which outputs are combined to give the final analogue value.Key Features WirelessMultisensor technology reduces false alarmsIncreased sensitivity to flaming firesXPERT card addressing systemFiveyear battery life using standard AA alkaline batteries

GBP 190.46
1

Apollo XPander A1R Heat Detector and Mounting Base - XPA-CB-11170-APO

Apollo XPander A1R Heat Detector and Mounting Base - XPA-CB-11170-APO

Apollo XPander A1R Heat Detector and Mounting Base - XPA-CB-11170-APOThere are two heat detectors in the XPander range designed to suit a wide variety of operating conditions. A static heat detector CS responds only when a fixed temperature has been reached and a Rate-of-Rise Detector A1R which has a fixed upper limit but in addition measures the rate of increase in temperature.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessCan be used in applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsCS detectors are ideal for use in the environments with rapid temperature fluctuations such as boiler roomsBi-directional monitored radio platformFiveyear battery life using standard AA alkaline batteries

GBP 188.28
1

Apollo XPander CS Heat Detector and Mounting Base - XPA-CB-11171-APO

Apollo XPander CS Heat Detector and Mounting Base - XPA-CB-11171-APO

Apollo XPander CS Heat Detector and Mounting Base - XPA-CB-11171-APOThere are two heat detectors in the XPander range designed to suit a wide variety of operating conditions. A static heat detector CS responds only when a fixed temperature has been reached and a Rate-of-Rise Detector A1R which has a fixed upper limit but in addition measures the rate of increase in temperature.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessCan be used in applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsCS detectors are ideal for use in the environments with rapid temperature fluctuations such as boiler roomsBi-directional monitored radio platformFiveyear battery life using standard AA alkaline batteries

GBP 187.36
1

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APO

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APO

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APOThe XPander Sounder and Sounder Base is wireless and designed to be used with XPander detectors and manual call points.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring.The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessBi-directional monitored radio platformChoice of 32 selectable tonesAudible self-test availableOutput is between 92 and 106dbA at 1m dependent on tone setting

GBP 372.43
1

Apollo Series 65 Optical Smoke Detector with Flashing LED and Magnetic Test Switch 55000-315APO

Apollo Series 65 Optical Smoke Detector with Flashing LED and Magnetic Test Switch 55000-315APO

Apollo Series 65 Optical Smoke Detector with Flashing LED and Magnetic Test Switch 55000-315APOThe Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector and has an indicator LED which is clear in quiescent state but produces a red light in alarm.OperationThe Series 65 Optical Smoke Detector has a moulded self-extinguishing white polycarbonate case with wind resistant smoke inlets. Nickel-plated stainless-steel wiper contacts connect the detector to the base. Inside the case a printed circuit board has the optical system mounted on one side and the signal processing electronics on the other. The sensing chamber is a black moulding configured as a labyrinth which prevents penetration of ambient light. The labyrinth has a fine gauze insect-resistant cover. The chamber houses an infrared light emitting diode LED and a photo-diode which has an integral visible-light filter as extra protection against ambient light. Every three seconds the LED emits a burst of collimated light modulated at 4kHz. In clear air light from the LED does not fall directly on the diode because the LED is positioned at an obtuse angle to the diode. When smoke enters the chamber a fraction of the collimated light is scattered onto the photo-diode. If the resulting signal from the photo-diode is above a pre-set threshold the LED emits two more bursts of light this time at two-second intervals. If light is scattered onto the photo-diode by both these pulses due to the presence of smoke the detector signals an alarm state by switching the alarm latch on increasing the current drawn from the supply from about 40A to a maximum of 75mA. This fall in the impedance of the detector is recognised by the control panel as an alarm signal. The alarm current also illuminates the detector integral LED. A remote indicator connected between the L1 IN terminal and the R terminal will have a voltage equal to the supply voltage less 1 volt across it and so will illuminate. To ensure correct operation of the detector the control panel must be arranged to supply a maximum of 33 Volts dc and a minimum of 9 Volts dc in normal operation. The supply may fall to 6 Volts dc in alarm conditions if a supply current of at least 10mA is available at this voltage. To ensure effective illumination of the integral LED and any remote indicator the supply to the detector should exceed 12 Volts. To restore the detector to quiescent condition it is necessary to expel any smoke and interrupt the electrical supply to the detector for a minimum of one second.Key FeaturesResponds well to slow-burning smouldering firesWell-suited to bedrooms and escape routesUnaffected by wind or atmospheric pressureFlashing LED and magnet operated test switch option

GBP 19.98
1

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.Key Features Self-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 ratedRed and clear lens options

GBP 69.17
1

Apollo Multi-Tone Red Open-Area Sounder Visual Indicator without Isolator 55000-291APO

Apollo Multi-Tone Red Open-Area Sounder Visual Indicator without Isolator 55000-291APO

Apollo Multi-Tone Red Open-Area Sounder Visual Indicator without Isolator 55000-291APOThe Multi-Tone Open-Area Sounder Visual Indicator is designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.The Multi-tone Open-Area Alarm Devices are powered directly from the loop and need no external power supply. They operate at 18 28V DC and are polarity sensitive.Key FeaturesChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressingIP21C

GBP 101.80
1

Apollo Soteria Dimension IR Optical Detector FL5100-600APO

Apollo Soteria Dimension IR Optical Detector FL5100-600APO

Apollo Soteria Dimension IR Optical Detector FL5100-600APOThe Soteria Dimension Optical Detector contains two daylight filtered photo-diodes and three IR emitters in different positions and angles. Different combinations of these are used to act as smoke sensors and proximity sensors to measure the smoke level at the detector and to detect any physical obstruction or interference of the detector.As this detector is chamberless an IR LED emits light outside the detector. The light is scattered by smoke back towards the detector and registered by a photo-diode.A pair of microprocessors control these sensors setting the sensor timings and using a digital phase-sensitive detection algorithm to reduce noise and the effect of background light. They then provide digital filtering for transient rejection compensation for drift and temperature and ultimately make an alarm decision.Key FeaturesLow profile designUtilises digital CoreProtocol communicationsCompatible with Discovery and XP95 systemsIntegrated switchable isolator as standard8-way DIL switch addressingDrift compensationFasTest for quicker testingTricoloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-7 and EN 54-17 standardsLocking mechanism grub screw

GBP 209.29
1

Apollo Red Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-293APO

Apollo Red Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-293APO

Apollo Red Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-293APOThe Multi-Tone Open-Area Sounder Visual Indicatoris designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.Key Features Choice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressingBuilt in isolatorIP21C

GBP 101.80
1

Apollo Red Weatherproof Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-298APO

Apollo Red Weatherproof Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-298APO

Apollo Red Weatherproof Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-298APOThe Weatherproof Multi-Tone Open-Area Sounder Visual Indicatoris designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.Key Features Choice of tones on standard device Apollo Slow Whoop and DINIP66 ratedTwo Volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressingBuilt in isolator

GBP 173.80
1

Apollo Discovery Clear Open-Area Sounder Beacon - 58000-007APO

Apollo Discovery Clear Open-Area Sounder Beacon - 58000-007APO

Apollo Discovery Clear Open-Area Sounder Beacon - 58000-007APOThe Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a Magnetic Wand can be used to adjust and test each sounder locally.Discovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms.Key FeaturesIndividual control of the sounder and visual indicatorVolume and tone settings can be selected from the control panelTones can be used for other purposes in addition to warning of fire making the device ideal for use in schools etcSoft start option ideal for hospitals and nursing homesGroup and global control for increased response time

GBP 73.38
1

Apollo Soteria Dimension Specialist IR Optical Detector FL6100-600APO

Apollo Soteria Dimension Specialist IR Optical Detector FL6100-600APO

Apollo Soteria Dimension Specialist IR Optical Detector FL6100-600APOThe Soteria Dimension Specialist Optical Detector contains two daylight filtered photo-diodes and three IR emitters in different positions and angles. Different combinations of these are used to act as smoke sensors and proximity sensors to measure the smoke level at the detector and to detect any physical obstruction or interference of the detector.As this detector is chamberless an IR LED emits light outside the detector. The light is scattered by smoke back towards the detector and registered by a photo-diode.A pair of microprocessors control these sensors setting the sensor timings and using a digital phase-sensitive detection algorithm to reduce noise and the effect of background light. They then provide digital filtering for transient rejection compensation for drift and temperature and ultimately make an alarm decision.Key FeaturesLow profile designUtilises digital CoreProtocol communicationsCompatible with Discovery and XP95 systemsIntegrated switchable isolator as standard8-way DIL switch addressingDrift compensationFasTest for quicker testingTricoloured LED status indicatorComprehensively tested to exceed EN 54-7 and EN 54-17 standardsRuggedized metal face plate which is secured with anti-tamper screwsDesigned and tested to meet the requirements of Ministry of Justice specification STDESPEC038Independently certified to DHF TS001 for anti-ligature use in specialist areas

GBP 366.25
1

Apollo XPander Red Beacon with Red Mounting Base - XPA-CB-14003-APO

Apollo XPander Red Beacon with Red Mounting Base - XPA-CB-14003-APO

Apollo XPander Red Beacon with Red Mounting Base - XPA-CB-14003-APOThe XPander Sounder Visual Indicator and Sounder Base is a wireless and designed to be used with XPander detectors and manual call points.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessBi-directional monitored radio platformChoice of 32 selectable tonesAudible self-test availableOutput is between 92dBA and 106dBA at 1m-dependent on tone setting

GBP 315.36
1

Apollo XPander Combined Sounder Beacon Base XPA-WB-14037-APO

Apollo XPander Combined Sounder Beacon Base XPA-WB-14037-APO

Apollo XPander Combined Sounder Beacon BaseXPA-WB-14037-APOThe XPander Combined Sounder and Detector is wireless and designed to provide one-point detection and notification.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessAvailable with a choice of XPander detectorsBi-directional monitored radio platformA choice of four tone pairsCertified to EN 54-25

GBP 368.42
1

Apollo XPander Combined Sounder Base XPA-WB-14036-APO

Apollo XPander Combined Sounder Base XPA-WB-14036-APO

Apollo XPander Combined Sounder BaseXPA-WB-14036-APOThe XPander Combined Sounder and Detector is wireless and designed to provide one-point detection and notification.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessAvailable with a choice of XPander detectorsBi-directional monitored radio platformA choice of four tone pairsCertified to EN 54-25

GBP 318.79
1

Apollo 58002-350APO Discovery Base Sounder Visual Indicator White Flash

Apollo 58002-350APO Discovery Base Sounder Visual Indicator White Flash

Apollo 58002-350APO Discovery Base Sounder Visual Indicator White FlashThe Discovery Base Sounder Visual Indicator is available in white or red flash versions and can either be used with an Apollo addressable detector or as a stand-alone device with a base capThe Discovery Base Sounder Visual Indicator includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.Key FeaturesSimple installation using an XPERT 8 baseAdjustable tone and volume 15 tone pairs 7 volume settingsBuilt-in isolator when used with XPERT 8 BaseUnique acoustic self testSet-up and testing of devices at point of installationIndependent control of sounder and visual indicatorAvailable in red or white flash

GBP 57.83
1

Apollo 58002-351APO Discovery Base Sounder Visual Indicator Red Flash

Apollo 58002-351APO Discovery Base Sounder Visual Indicator Red Flash

Apollo 58002-351APO Discovery Base Sounder Visual Indicator Red FlashThe Discovery Base Sounder Visual Indicator is available in white or red flash versions and can either be used with an Apollo addressable detector or as a stand-alone device with a base capThe Discovery Base Sounder Visual Indicator includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.Key FeaturesSimple installation using an XPERT 8 baseAdjustable tone and volume 15 tone pairs 7 volume settingsBuilt-in isolator when used with XPERT 8 BaseUnique acoustic self testSet-up and testing of devices at point of installationIndependent control of sounder and visual indicatorAvailable in red or white flash

GBP 57.83
1

Apollo FL5100-660APO Soteria Dimension Optical Smoke Detector - Black

Apollo FL5100-660APO Soteria Dimension Optical Smoke Detector - Black

Apollo FL5100-660APO Soteria Dimension Optical Smoke Detector - BlackThe Apollo Soteria Dimension Optical Smoke Detector Black has an innovative design which differs from standard fire detectors having no chamber and being flush mounted. A new optical sensing technology is used to detect smoke particles outside the detector housing. A combination of Infra-Red IR LEDs and photo-diodes identify smoke particles detected just below the detector housing and initiates an alarm.OperationThe Soteria Dimension Optical Detector contains two daylight filtered photo-diodes and three IR emitters in different positions and angles. Different combinations of these are used to act as smoke sensors and proximity sensors to measure the smoke level at the detector in the event of a fire and to detect any physical obstructions.As this detector is chamberless an IR LED emits light outside the detector. The light is scattered by smoke back towards the detector and registered by a photo-diode.A pair of microprocessors control these sensors setting the sensor timings and using a digital phase-sensitive detection algorithm to reduce noise and the effect of background light. They then provide digital filtering for transient rejection compensation for drift and temperature and ultimately make an alarm decision.The mode of operation may be selected at the fire control panel.Key FeaturesFlush mountedUtilises digital CoreProtocol communicationsCompatible with Discovery and XP95 systems not all features may be available when connected to an XP95Discovery panelIntegrated switchable isolator as standard8-way DIL switch addressingDrift compensationFasTest for quicker testingTricoloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-7 and EN 54-17 standardsLocking mechanism grub screw

GBP 209.29
1