ProfitSpring | B2B PPC Agency

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APO

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APOThe Intelligent Triple IR Flame Detector IR3 is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency flickering infra-red radiation emitted by flames during combustion.Key Features Loop-poweredSensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeFalse alarms due to lighting or flickering sunlight are minimisedCompatible with Discovery and XP95 protocols

GBP 2854.80

1

Apollo Intelligent Triple IR Flame Detector 55000-020APO

Apollo Intelligent Triple IR Flame Detector 55000-020APOThe Intelligent Triple IR Flame Detector IR3 is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency flickering infra-red radiation emitted by flames during combustion.Key Features Loop-poweredSensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeFalse alarms due to lighting or flickering sunlight are minimisedCompatible with Discovery and XP95 protocols

GBP 2098.20

1

Apollo Intelligent Dual IR Flame Detector 55000-280APO

Apollo Intelligent Dual IR Flame Detector 55000-280APOThe Intelligent IR Flame Detector is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Applications include aircraft hangars coal handling and paper manufacturing plants and woodworking environments.Key Features Sensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeCompatible with Discovery and XP95 protocolsRemote optical self-test function90 field of viewUp to 40m coverage

GBP 1747.20

1

Apollo Flameproof Intelligent IR2 Flame Detector 55000-295APO

Apollo Flameproof Intelligent IR2 Flame Detector 55000-295APOThe Intelligent IR Flame Detector is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Applications include aircraft hangars coal handling and paper manufacturing plants and woodworking environments.Key Features Sensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeCompatible with Discovery and XP95 protocolsRemote optical self-test function90 field of viewUp to 40m coverage

GBP 2737.80

1

Apollo XP95 Sounder Beacon Base - 45681-331APO

Apollo XP95 Sounder Beacon Base - 45681-331APOThe Sounder Beacon Base are loop powered so needs no external power supply. It operates at 1728V DC and is polarity-sensitive. The Sounder Beacon Base are moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm.The Sounder Beacon Bases will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Sounder Beacon Base are available only when it is connected to a control panel with the appropriate software.Key FeaturesTwo volume ranges 55-75dBA and 75-91dBAVisual indicator flash rate of once per secondSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and visual indicator self-test

GBP 58.67

1

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MARThe Marine DIN-Rail Sounder Controller 8 Amperes is used to control the operation of a zone of externally powered sounders and report their status to the fire control panel.The device is loop powered and controlled by the fire control panel using the output bits in the communication protocol. The unit is polarity sensitive. This unit needs to be installed in a suitable enclosure Part No. 29600-239240 or equivalent and secured using the end stops.Key FeaturesEnables sounders to be operated continuously or to be pulsed one second on one second offMay be synchronised when in pulsed operationExternal supply monitoringWill accept a load of 8 Amperes

GBP 119.31

1

Apollo Isolator XP95 and Discovery 55000-720APO

Apollo Isolator XP95 and Discovery 55000-720APOThe Isolator is placed at intervals on the loop and ensures that in the case of a short circuit only the section between the isolators will be affected. When the short circuit is removed the isolators automatically restore power and data to the isolated section.Key Features Detects wiring short-circuitsMinimises disruption from short-circuitsAutomatic de-isolation on the short-circuit removalUp to 20 detectors or their equivalent load may be installed between isolators

GBP 18.46

1

Apollo White Weatherproof Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-299APO

Apollo White Weatherproof Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-299APOThe Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.The Multi-tone Open-Area Alarm Devices are powered directly from the loop and need no external power supply. They operate at 18 28V DC and are polarity sensitive. Synchronisation of the tones ensures the integrity of the signal tones from different sounders do not merge into one signal that could be mistaken for a different tone.Key FeaturesChoice of tones on standard device Apollo Slow Whoop and DINIP66 ratedTwo Volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressingBuilt in isolator

GBP 175.15

1

Apollo White Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-294APO

Apollo White Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-294APOThe Multi-Tone Open-Area Sounder Visual Indicator is designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.The Multi-tone Open-Area Alarm Devices are powered directly from the loop and need no external power supply. They operate at 18 28V DC and are polarity sensitive. Synchronisation of the tones ensures the integrity of the signal tones from different sounders do not merge into one signal that could be mistaken for a different tone.Key FeaturesChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressingBuilt in isolatorIP21C

GBP 102.28

1

Apollo Orbis Marine A2S Heat Detector with Flashing LED ORB-HT-41014-MAR

Apollo Orbis Marine A2S Heat Detector with Flashing LED ORB-HT-41014-MARThe Orbis Marine Heat Detector uses a single thermistor to sense the air temperature around the detector. There are twelve heat detectors in the Orbis Marine range designed to suit a wide variety of operating conditions.ApplicationHeat detectors have a wide range of response characteristics and the choice of the right type for a particular application may not always seem straightforward. It is helpful to understand the way that heat detectors are classified as explained earlier and to memorize a simple rule use the most sensitive heat detector available consistent with avoiding false alarms.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsFlashing LED option

GBP 19.97

1

Apollo Exd Conventional Triple IR Flame Detector 55000-062APO

Apollo Exd Conventional Triple IR Flame Detector 55000-062APOThe Flameproof IR3 Flame Detector is designed for use in hazardous environments in indoor and outdoor applications.It is sensitive to low-frequency flickering infra-red radiation emitted by flames during combustion. The sensor operates even through a layer of oil dust water vapour or ice. Baseefa has certified the detector for compliance to standards EN 60079-0 EN 60079-1 and EN 61241-1 Key Features ATEX IECEx certified II2GD Ex d IIC T4 Gb Ex tb IIICT135 C Db IP66 A21 Zones 1 21 2 and 22Selectable output options Conventional two-wire 4-20mA Latching or Non-latching Relay Contacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP66 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 55C

GBP 2340.00

1

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527Universal Bracket for the Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 164.20

1

Apollo Soteria Dimension IR Optical Detector FL5100-600APO

Apollo Soteria Dimension IR Optical Detector FL5100-600APOThe Soteria Dimension Optical Detector contains two daylight filtered photo-diodes and three IR emitters in different positions and angles. Different combinations of these are used to act as smoke sensors and proximity sensors to measure the smoke level at the detector and to detect any physical obstruction or interference of the detector.As this detector is chamberless an IR LED emits light outside the detector. The light is scattered by smoke back towards the detector and registered by a photo-diode.A pair of microprocessors control these sensors setting the sensor timings and using a digital phase-sensitive detection algorithm to reduce noise and the effect of background light. They then provide digital filtering for transient rejection compensation for drift and temperature and ultimately make an alarm decision.Key FeaturesLow profile designUtilises digital CoreProtocol communicationsCompatible with Discovery and XP95 systemsIntegrated switchable isolator as standard8-way DIL switch addressingDrift compensationFasTest for quicker testingTricoloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-7 and EN 54-17 standardsLocking mechanism grub screw

GBP 209.29

1

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APO

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APOThe XPander Optical Smoke Detector works on the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessPerforms well in black and white smokeBi-directional radio communicationsXPERT card addressing systemFiveyear battery life using standard AA alkaline batteries

GBP 185.70

1

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and CS Heat DetectorXPA-CB-14022-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43

1

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and A1R Heat DetectorXPA-CB-14021-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43

1

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Sounder Beacon and Optical Smoke DetectorXPA-CB-14020-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectors remote test facility3-5 years battery life

GBP 370.69

1

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APO

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APOThe XPander Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor from which outputs are combined to give the final analogue value.Key Features WirelessMultisensor technology reduces false alarmsIncreased sensitivity to flaming firesXPERT card addressing systemFiveyear battery life using standard AA alkaline batteries

GBP 190.46

1

Apollo XPander A1R Heat Detector and Mounting Base - XPA-CB-11170-APO

Apollo XPander A1R Heat Detector and Mounting Base - XPA-CB-11170-APOThere are two heat detectors in the XPander range designed to suit a wide variety of operating conditions. A static heat detector CS responds only when a fixed temperature has been reached and a Rate-of-Rise Detector A1R which has a fixed upper limit but in addition measures the rate of increase in temperature.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessCan be used in applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsCS detectors are ideal for use in the environments with rapid temperature fluctuations such as boiler roomsBi-directional monitored radio platformFiveyear battery life using standard AA alkaline batteries

GBP 188.28

1

Apollo XPander CS Heat Detector and Mounting Base - XPA-CB-11171-APO

Apollo XPander CS Heat Detector and Mounting Base - XPA-CB-11171-APOThere are two heat detectors in the XPander range designed to suit a wide variety of operating conditions. A static heat detector CS responds only when a fixed temperature has been reached and a Rate-of-Rise Detector A1R which has a fixed upper limit but in addition measures the rate of increase in temperature.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key Features WirelessCan be used in applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsCS detectors are ideal for use in the environments with rapid temperature fluctuations such as boiler roomsBi-directional monitored radio platformFiveyear battery life using standard AA alkaline batteries

GBP 187.36

1

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APO

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APOThe XPander Sounder and Sounder Base is wireless and designed to be used with XPander detectors and manual call points.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring.The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessBi-directional monitored radio platformChoice of 32 selectable tonesAudible self-test availableOutput is between 92 and 106dbA at 1m dependent on tone setting

GBP 372.43

1

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APO

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APOThe IS IR3 Flame Detector is designed for harsh environments in either indoor or outdoor applications. It is sensitive to low frequency flickering IR radiation emitted from flames during combustion.The sensor operates even through a layer of oil dust water vapour or ice. These detectors have been approved byBaseefa to standards EN50014 EN50020 and EN50284. The requirements of Directive 949EC the Atmosphere Explosives ATEX directive have also been met.Key Features ATEX IECEx certified II 1 GCENELECIEC Certified Ga Ex ia IIC T4Selectable output options Conventional two-wire 4-20mA Latching or Non-latching RelayContacts - FireFault Pre alarmClass 1 sensitivity to EN54-10 detects 0.1m2 fire at 25mHigh optical interference immunitySelectable response speedOptical self-testLow power consumptionIP65 ratedSupply voltage 14 to 30VdcOperating temperature -10C to 40C T4Operating temperature -10C to 55C

GBP 2233.04

1

Apollo Soteria Dimension Specialist IR Optical Detector FL6100-600APO

Apollo Soteria Dimension Specialist IR Optical Detector FL6100-600APOThe Soteria Dimension Specialist Optical Detector contains two daylight filtered photo-diodes and three IR emitters in different positions and angles. Different combinations of these are used to act as smoke sensors and proximity sensors to measure the smoke level at the detector and to detect any physical obstruction or interference of the detector.As this detector is chamberless an IR LED emits light outside the detector. The light is scattered by smoke back towards the detector and registered by a photo-diode.A pair of microprocessors control these sensors setting the sensor timings and using a digital phase-sensitive detection algorithm to reduce noise and the effect of background light. They then provide digital filtering for transient rejection compensation for drift and temperature and ultimately make an alarm decision.Key FeaturesLow profile designUtilises digital CoreProtocol communicationsCompatible with Discovery and XP95 systemsIntegrated switchable isolator as standard8-way DIL switch addressingDrift compensationFasTest for quicker testingTricoloured LED status indicatorComprehensively tested to exceed EN 54-7 and EN 54-17 standardsRuggedized metal face plate which is secured with anti-tamper screwsDesigned and tested to meet the requirements of Ministry of Justice specification STDESPEC038Independently certified to DHF TS001 for anti-ligature use in specialist areas

GBP 366.25

1

Apollo Marine DIN-Rail Dual Isolator 55000-770MAR

Apollo Marine DIN-Rail Dual Isolator 55000-770MARThe Marine DIN-Rail Dual Isolator provides in one housing two independent isolators which sense and isolate short-circuits on loops and spurs. This unit needs to be installed in a suitable enclosure Part No. 29600-239240 or equivalent and secured using the end stops.OperationThe isolators are loop-powered and are polarity sensitive. A maximum of twenty detectors may be installed between isolators. When a short-circuit condition exists on either side of the isolator the yellow LED is illuminated.Under normal operating conditions a low impedance is present between the two negative terminals of each isolator channel so that power and signals are passed to the next base in line.If a short-circuit or abnormally low impedance occurs across the loop the fall in voltage is sensed and the isolator isolates the negative supply in the direction of the fault. In this condition the yellow LED of the affected channel will be illuminated. The isolated section of loop is tested using a current pulse every five seconds. When the short-circuit is removed the power will automatically be restored.Key FeaturesLoop-poweredUp to 20 detectors can be installed between isolatorsAllows fully isolated spurs

GBP 78.92

1

Apollo Orbis Marine BR Heat Detector with Flashing LED ORB-HT-41015-MAR

Apollo Orbis Marine BR Heat Detector with Flashing LED ORB-HT-41015-MARThe Orbis Marine Heat Detector uses a single thermistor to sense the air temperature around the detector. There are twelve heat detectors in the Orbis Marine range designed to suit a wide variety of operating conditions.ApplicationHeat detectors have a wide range of response characteristics and the choice of the right type for a particular application may not always seem straightforward. It is helpful to understand the way that heat detectors are classified as explained earlier and to memorize a simple rule use the most sensitive heat detector available consistent with avoiding false alarms.Brand InformationOrbis Marine conventional fire detectors offer a wealth of features to save time enhance reliability and reduce false alarms within the marine environment. These include drift compensation and DirtAlert a feature that warns Service Engineers via a flashing yellow LED that detectors need maintenance and patented FasTest a procedure that takes just four seconds to test smoke detectors and confirm that they are functioning correctly.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under normal conditionsFlashing LED option

GBP 20.99

1

Brand

Merchant

Price (EUR)

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APO

Apollo Intelligent Triple IR Flame Detector 55000-020APO

Apollo Intelligent Dual IR Flame Detector 55000-280APO

Apollo Flameproof Intelligent IR2 Flame Detector 55000-295APO

Apollo XP95 Sounder Beacon Base - 45681-331APO

Apollo Marine DIN-Rail Sounder Controller 8 Amperes 55000-181MAR

Apollo Isolator XP95 and Discovery 55000-720APO

Apollo White Weatherproof Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-299APO

Apollo White Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-294APO

Apollo Orbis Marine A2S Heat Detector with Flashing LED ORB-HT-41014-MAR

Apollo Exd Conventional Triple IR Flame Detector 55000-062APO

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Soteria Dimension IR Optical Detector FL5100-600APO

Apollo XPander Optical Smoke Detector and Mounting Base XPA-CB-12034-APO

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Multisensor Detector and Mounting Base XPA-CB-13032-APO

Apollo XPander A1R Heat Detector and Mounting Base - XPA-CB-11170-APO

Apollo XPander CS Heat Detector and Mounting Base - XPA-CB-11171-APO

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APO

Apollo I.S. Conventional Triple IR Flame Detector 55000-063APO

Apollo Soteria Dimension Specialist IR Optical Detector FL6100-600APO

Apollo Marine DIN-Rail Dual Isolator 55000-770MAR

Apollo Orbis Marine BR Heat Detector with Flashing LED ORB-HT-41015-MAR

Powered by Cobiro