13 results (0,15090 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeatThe Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat uses advanced dual optical sensing technology to accurately detect smoke particles entering the chamber and a central heat thermistor for detecting heat. It has five different operating modes giving you the option to adapt the detector to suits it environment.Key Features of the SA5100-710APOAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 48.30
1

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor DetectorOpticalHeatThe Soteria Multi-Sensor Detector uses advanced opticalsensing technology PureLight to detect smoke particles entering the chamberand is fitted with two thermistors for detecting heat. It easily discriminatesagainst false alarm stimuli and is a great environmentally friendly alternativeto ionisation detectors.Key FeaturesFive modes of operation for ultimate fire detection andfalse alarm management in a wide range of applicationsUtilises digital Core Protocol communications providing arange of advanced fire detection featuresA sophisticated dynamic algorithm providing transientrejection and compensation for drift while maintaining accurate sensitivityFasTest for quicker testing of detectorsIntegrated switchable isolator

GBP 56.16
1

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCOThe Soteria Tri-Sensor Detector Dual OpticalHeatCO uses advanced dual optical sensing technology to accurately detect smoke particles and discriminate against false alarm stimuli. It has a centrally located heat thermistor along with a CO sensor giving you three methods of detection.The detector can operate in 5 modes of sensitivity.Soteria detectors have been designed to operate on Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on Discovery bases XPERT 7 Intelligent Mounting Base.Key FeaturesAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 67.08
1

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features suchas group global and individual control status reporting and selectable toneand volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volumelevelsSoftware defined group addressing with up to 16 groupaddressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body WhiteFlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo XP95 Sounder VAD Base DIN-Tone with Isolator 45681-707APO

Apollo XP95 Sounder VAD Base DIN-Tone with Isolator 45681-707APO

Apollo XP95 Sounder VAD Base DIN-Tone with IsolatorThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.Maintenance ServiceDetectors should be maintained according to BS 5839-1 or other locally applicable code. Test equipment can be ordered from Apollo for testing smoke and heat detectors. Detectors should not be cleaned in the field except for careful removal of exterior dirt with a damp cloth. For cleaning and recalibration detectors should be returned to Apollo Fire Detectors or to the local distributor.Key FeaturesEN 54-23 Certified Category O VAD0.5Hz Flash Rate whiteSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt-in isolatorEN 54-3 Certified Sounder

GBP 83.74
1

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APO

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APO

Apollo Orbis Intrinsically Safe A2S Heat Detector with Flashing LED ORB-HT-51148-APOThe Orbis IS Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The Orbis IS range incorporates seven heat detector classes to suit a wide range of operating conditions.InstallationIt is important that the Orbis I.S. detectors be installed in such a way that all terminals and connections are protected to at least IP20 when the detector is in the base. Special care must be taken with the rear of the mounting base where live metal parts may be accessible. Flush mounting of the base on a flat surface will provide the required degree of protection.Key FeaturesTimeSaver BasePatented FasTest enabling functional testing in four secondsDirtAlert indicates limit of drift compensationTolerates extreme operating conditions -40C to 70 CFalse alarm reductionFlashing LED option

GBP 77.36
1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02
1

Apollo Soteria Multi-Sensor Detector Isolated SA5100-700

Apollo Soteria Multi-Sensor Detector Isolated SA5100-700

Apollo Soteria Multi-Sensor Detector Isolated SA5100-700TheSOTERIA OpticalHeat Multisensor Detector uses new optical sensing technology PureLight to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat. It can be switched to detect smoke heat or a combination of both offering flexibility.Backwards CompatibilitySoteria detectors have been designed to operate on XP95 and Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on XP95 and Discovery bases XPERT 7 Intelligent Mounting Base. It should be noted that not all features of Soteria will be available when used with XP95 or Discovery fire control panels.If Soteria detectors are used with XP95 fire control panels incorporating drift compensation algorithms these must be disabled when communicating with Soteria devices. When Soteria detectors are used with an XPERT 7 Intelligent Mounting Base on a CoreProtocol system Soteria devices will have a 128 address offset due to only 7 address pips being available on the XPERT 7 card. For example an XPERT 7 card set at 32 will address as 160 on CoreProtocol with Soteria detectors.Key FeaturesDual heat sensorsPureLight optical technology reduces false alarms and enhances smoke recognitionUtilises digital CoreProtocol communicationsCompatible with XP95 and Discovery systemsCompatible with existing fire control panelsMechanically compatible with existing basesAvailable with or without integrated switchable isolatorTri-coloured LED status indicatorPolycarbonate moulding for colour stability and strengthComprehensively tested to exceed EN 54-5 standardFasTest for quicker testing of detectorsXPERT card addressing or auto addressingLocking mechanism grub screwPlease Note Not all features are available when SOTERIA devices are connected to an XP95 or Discovery fire control panel.

GBP 49.36
1

Apollo SA5501-300APO Open-Area Sounder White Body

Apollo SA5501-300APO Open-Area Sounder White Body

Apollo SA5501-300APO Open-Area Sounder White BodyThe Intelligent Open-Area Sounder is designed for use inopen-areas and can be connected to anyCoreProtocol Discovery or XP95 system. The Intelligent Open-Area Sounder includes features such as groupand individual control status reporting and selectable tone and volume settings all configuredthrough the fire control panel.The right tone for the installationThe Intelligent Open-Area Sounder offers a choice of 15 evacuationtones including the standard Apollo evacuation tone. A tone is selected during commissioning inorder to suit local regulations or customs.Whichever evacuation tone is selected there is a secondary tonewhich may be used for alerting or warning of a possible evacuation. The right level of soundThe sounder is set during commissioning to one of sevenlevels of sound the highest level being nominally 101 dbA at 1m. At lessthan 60 dbA the lowest level falls outside the scope of the EN54 standard. Ithas been included to provide a very local warning for the use of personnel in particularenvironments such as nurse stations in hospitals.AddressingThe Open-Area Alarm Devices respond to their own individual address which is set via the appropriate XPERTaddress card. Group address and tones on CoreProtocol systems are set using the fire control panel.Location-specific volume settingDetectors and sounder indicators are installed in manydifferent types of environment. When configuring the Intelligent Open-Area Sounder devicesthe adjustment of the volume can be done at the point of installation. The commissioning engineer simply sets the control panel to Set-upand then walks from one device to the next to set the required volume using amagnetic wand. When all devices have been set the engineer simply presses abutton on the control panel which then registers all the individual volumesettings.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesAlarm switching by individual device by group address or ofall individual devices on the loopBuilt-in controllable isolatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 46.96
1

Apollo SA5500-300APO Open-Area Sounder Red Body

Apollo SA5500-300APO Open-Area Sounder Red Body

Apollo SA5500-300APO Open-Area Sounder Red BodyThe Intelligent Open-Area Sounder is designed for use inopen-areas and can be connected to anyCoreProtocol Discovery or XP95 system. The Intelligent Open-Area Sounder includes features such as groupand individual control status reporting and selectable tone and volume settings all configuredthrough the fire control panel.The right tone for the installationThe Intelligent Open-Area Sounder offers a choice of 15 evacuationtones including the standard Apollo evacuation tone. A tone is selected during commissioning inorder to suit local regulations or customs.Whichever evacuation tone is selected there is a secondary tonewhich may be used for alerting or warning of a possible evacuation. The right level of soundThe sounder is set during commissioning to one of sevenlevels of sound the highest level being nominally 101 dbA at 1m. At lessthan 60 dbA the lowest level falls outside the scope of the EN54 standard. Ithas been included to provide a very local warning for the use of personnel in particularenvironments such as nurse stations in hospitals.AddressingThe Open-Area Alarm Devices respond to their own individual address which is set via the appropriate XPERTaddress card. Group address and tones on CoreProtocol systems are set using the fire control panel.Location-specific volume settingDetectors and sounder indicators are installed in manydifferent types of environment. When configuring the Intelligent Open-Area Sounder devicesthe adjustment of the volume can be done at the point of installation. The commissioning engineer simply sets the control panel to Set-upand then walks from one device to the next to set the required volume using amagnetic wand. When all devices have been set the engineer simply presses abutton on the control panel which then registers all the individual volumesettings.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesAlarm switching by individual device by group address or ofall individual devices on the loopBuilt-in controllable isolatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 46.96
1