46 results (0,17723 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Baileigh BS-350SA Dual Mitering Semi-automatic Bandsaw

Baileigh BS-350SA Dual Mitering Semi-automatic Bandsaw

The BS-350SA 400v, 50hz power and has a cutting capacity of 267mm, but the best part of the BS-350SA is that is has a full cast iron head and bow can mitre 60 right and 45 left. \n \nThe BS-350SA blade motor features a 2hp motor which is driven by an AC inverter, built to deliver the reliability that shops demand. The best thing about being inverter driven is that you can make speed changes infinitely between 20mpm - 85mpm while the machine is running. Being able to change speeds helps improve blade life and give the best possible cut. Other feature of the BS-350SA that help achieve great cuts are full cast iron head and bow that are machined to exacting tolerances, precision ball bearing guides, and a large capacity flood coolant system. \n \nThe BS-350SA uses an industrial grade hydraulic system to power all semi-automatic actions. These actions include raising and lowering of the head, as well as clamping and releasing the vice. These actions are initiated with the use of a foot pedal, with settings at the control panel.

GBP 15299.99
1

Baileigh TN-300 Tube Notcher - 2004675

Baileigh TN-300 Tube Notcher - 2004675

The TN-300 tube and pipe notcher from Baileigh Industrial is the best production hole saw notcher on the market today. \n \nThis 220 volt, 50hz, single phase notcher is built using only the best components. The idea of the TN-300 was to get rid of the hand drill of the TN-250 and make a better tool for the fabricators. By building a rigid base and tying all the components together, we were able to reduce vibration created from the holesaw itself as it went through the material. \n \nNext we changed the RPM of the holesaw bit to 233rpm. This speed seemed to give the best combination of saw life and speed of cut. \n \nBoth of these changes helped make a more accurate cut and increase the life of the saws, saving time and money. \n \nThe TN-300 can notch from 1/2" to 3" (13mm to 76mm) tube. \n \nThe vice has a quick release feature so different notch angles can be set up in a second or two and locked-in with a solid taper lock. A large degree wheel for indexing the vice is also included. \n \nOperation of the TN-300 is easy. Turn it on, grab the hand wheel and rotate it toward the material. The carriage rides on a solid V-block roller assembly that pushes the holesaw into the material with limited vibration. This simple unique design on this tube notcher makes notching tube and pipe easy.

GBP 5999.99
1

Baileigh R-M5 Manual Roll Bender

Baileigh R-M5 Manual Roll Bender

The R-M5 ring roller from Baileigh Industrial is not like any other machine in its class; this machine is built using only the best parts and is designed to last a lifetime. The unique adjustment of this three driven roll bender allows bending on either side of the bottom roll to give you more radius options. \n \nSmall compact and portable \nComes with stand \n3 driven, manually powered rolls \nIncludes tooling for flat bar \nPerfect for doing small circles \nOptional tooling sets for round stock available

GBP 899.99
1

Baileigh PH-19 Reciprocating Hammer

Baileigh PH-19 Reciprocating Hammer

Baileigh industrial is making metal forming easier and more available to the masses with the economical PH-19 reciprocating power hammer. The Baileigh Industrial PH-19 power hammer would be a great addition to any shop that has to form metal fast. The PH-19 is considered to be the little brother to the Baileigh Industrial MH-19 multi hammer. They took what they learned from the best hammer on the market, the MH-19 multi hammer, and created what they consider to be the best reciprocating hammer period. The PH-19 can do many of the same functions as the MH-19, shrink, stretch, dome, edge turn, bead, offset, but at a price that fits any budget. What is even better is that the PH-19 also accepts a lot of the readily available MH-19 tooling. \n \nThe PH-19 uses a 240V motor to produce 1700 beats per minute and enough force to shape 16 gauge mild steel. It also has a 19 deep throat to allow for even the most unique shaping designs. A tooling quick release handle allows the operator to start working in the middle of the panel with keeping the working pressure constant. A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.

GBP 20999.99
1

Baileigh TN-50M Manual Tube Notcher

Baileigh TN-50M Manual Tube Notcher

If you only need to notch small sizes of schedule 40 pipe, then the TN-50M manual pipe notcher is for you. \n \nThe TN-50M might be small but it sure delivers enough punch to cope 1/4, 3/8, and 1/2 schedule 40 pipe. \n \nThis 90 manual notcher is perfect to take to job sites or just mount it on you bench and use when you need to. \n \nThe housing on the TN-50M is machined from solid steel to exacting tolerances in order to keep the precision blades working their best. \n \nThis mini-might will not let you down.

GBP 599.99
1

Baileigh HSP-200M Hydraulic Shop Press

Baileigh HSP-200M Hydraulic Shop Press

Our most powerful hydraulic shop press, the HSP-200M-HD can deliver 200 tons of pressure. A .375 cast steel framework makes this press one of the best values on the market. \n \n61.75 working width. \n11-diameter cylinder with 11.8 stroke. \n10 hp motor runs on 400-volt 3-phase power. \nStand-alone hydraulic system with a piston-style pump. \nCylinder can move left and right within the frame, ideal for off-center projects. \nPressure gauge comes standard. \nIncludes a 2-piece V-block set. \nBaileigh Industrial covers this hydraulic H-frame press with a 1-year parts warranty. \nLifetime technical support by phone means you can call our experienced team whenever you need help or project tips.

GBP 32999.99
1

Baileigh SR-2420M Slip Roll - 2004313

Baileigh SR-2420M Slip Roll - 2004313

Small bench top slip rolls have their place in most fabrication shops. In a lot of cases, these compact machines are more efficient to use when working on smaller projects. The SR-2420M manual roll former fits that description perfectly. It has the capacity to roll 20 gauge mild steel over its entire 24 length. \n \nThe SR-2420M, like all Baileigh Industrial slip rolls are built to last. It features a fully integrated frame that helps keep all three rolls in alignment to ensure the best possible results. It even incorporates a lever mechanism that helps open up the top roll when the form is complete. It even has three wire grooves for those jobs that require wire forming.

GBP 1599.99
1

Baileigh SF-5216E Manual Foot/Treadle Guillotine

Baileigh SF-5216E Manual Foot/Treadle Guillotine

When looking for a high-quality, economical foot shear for your shop, look no further than the SF-5216E foot shear from Baileigh Industrial. The SF-5216E foot shear is great for those small to medium shops or educational institutions that are on a budget. \n \nHowever, the best thing is that the SF-5216E is still is built to the same standards as all Baileigh Industrial equipment. \n \nThe SF-5216E foot shear is able to shear 52 of 16 gauge mild steel. High-chromium blades offer long life and have the ability to be resharpened. Front supports help the operator with alignment and an integrated back stop allows for repeatability of cut. A ridged cast frame completes the list of impressive features on the SF-5216E.

GBP 2999.99
1

Baileigh HSP-33M Hydraulic Workshop Press

Baileigh HSP-33M Hydraulic Workshop Press

The HSP-33M is in our line of motorised H-frame presses. This heavy-duty press is built in Europe using only the best quality components and craftsmanship, a fully welded 3/8 plate steel frame is designed to handle the 30 tons of force the industrial-grade hydraulic system can generate. This heavy-duty commercial press is designed to be worked hard, and weighing in at 385kgs of sturdy construction, it is designed to last for years constant use. \n \nThe robust 1.5kw 400 volt, three phase motor provides the press with two working speeds, a rapid descent speed and a slow working speed. It is also supplied with a hand pump for precision work. This is a feature-rich high-quality European-made hydraulic workshop press.

GBP 10499.99
1

Baileigh MPS-1 Manual Throatless Shear

Baileigh MPS-1 Manual Throatless Shear

The MPS-1 thoatless shear from Baileigh Industrial is quickly becoming the go-to machine for anyone that has to shape and cut sheet metal. \n \nThe unique design on the blades allow the operator to cut just about any shape. The best part is that this little machine only weighs 16lbs, but is strong enough to cut 14 gauge mild steel easily. \n \nThe throatless design of the MPS-1 shear makes it easy to cut large panels as well. As the operator cuts the material, the design of the cast base guides the material away from the blade allowing the operator to keep cutting without having to trim, saving a lot of production time. \n \nThe MPS-1 throatless shear will be a great addition to any workshop.

GBP 539.99
1

Baileigh WJT-3939 Welding Jig Table

Baileigh WJT-3939 Welding Jig Table

The WJT-3939 welding jig table is perfect for thos small shops looking for a good economical fixture mounting system. It ffeatures one solid mounting surface that has a flatness of /- .0025" and a Brinell hardness rating of between 140 and 160. \n \nThe best thing about the WJT-3939 metal welding table is that it accepts all of the same fixtures that the Baileigh heavy duty tables use, so when the time is right and the shop grows, you can step right up without having the large expense of swapping out fixtures. \n \n39 x 39 metal welding table \nMade from Q345 Steel \nBrinell Hardness 140~160 \nSingle Mounting Surface \nExpandable \n2 ton weight capacity \nIndustry Standard 28mm Mounting holes \n100mm hole spacing \nEtched Position Marks \nIncludes table Oiler, Brush and cleaning stone

GBP 3299.99
1

Baileigh DP-1500VS Variable Speed Drill Press

Baileigh DP-1500VS Variable Speed Drill Press

Baileigh's DP-1500VS heavy-duty drill press comes with power feed and a quality auto-reversing tap feature. This is a quality made machine using only the best quality castings and base metals to ensure rigidity when drilling at maximum capacity with the power downfeed. \n \nThe base and drill table is made from a heavy casting that has oversized T-slots for secure clamping of a vice or fixture. \n \nThis variable speed drill press has an inverter-driven head of which the quill speed can be properly adjusted to each different drill size that really will extend tooling life. \n \nAdjustments to the speed can be done by a speed potentiometer dial, noting the RPM is displayed on the digital read out. \n \nAdditional standard features of this quality floor type drill press are a safety guard with limit switch, a powerful coolant system, and a bright halogen light.

GBP 6999.99
1

Baileigh BS-260M Dual Mitering Bandsaw

Baileigh BS-260M Dual Mitering Bandsaw

Over the years the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it and made it even better. Gone is the day of the DC driver board to adjust the blade speed, now the BS-260M has an AC inverter for even better control and reliability, the best part is that it still is powered by only 220V, 50Hz, 1-phase single phase so it can be used just about anywhere. \n \nThe gear driven BS-260M is a 9" (229 mm) Band Saw is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick releases head lock allows the operator to change the miter angle in seconds. \n \nThe BS-260M band saw is made form only the best materials for long production life. The saw bow and pivot is made from solid cast iron to ensure the straightest of cuts with little to no vibration. A total of eight precision ball bearings are provided to keep the blade in line as well. The BS-260M also has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks for safety. \n \nOperation of the BS-260M is easy as well; there are two mode of operation depending on you preference. 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the band saw blade through the material this mode is perfect for the small or medium sized fabricators needs. 2- Hydraulic descent for larger production runs increases blade life and reduces operator fatigue. The hydraulic descent has a down feed adjustment for feed pressure.

GBP 8999.99
1

Baileigh HSP-110M Hydraulic Workshop Press

Baileigh HSP-110M Hydraulic Workshop Press

Built with only the best components, the HSP-110M from Baileigh Industrial sets the standard that all other hydraulic presses are measured by. \n \nThe HSP-110M has a 3hp, 400 volt, three phase motor that is able to push all 110 tons of force and not even break a sweat. And by using fully welded 3/8 plate steel for the framework, makes this press the most ridged press in its price range. \n \nThis press includes an automatic piston return, two speed down movement with pressure regulator, chrome piston, head screw, and a cylinder that is moveable left or right within the framework itself. \n \nOperation of the HSP-110M hydraulic press has its option as well, the operator can chose operate the ram automatically (motorised) or manually (hand pump) for even more control. \n \nWhether it is being used for general assembly, straightening work, or just for pressing bearings in and out of their housings, the HSP-110M is a great choice.

GBP 16399.99
1

Baileigh HSP-100A Pneumatic Workshop Press

Baileigh HSP-100A Pneumatic Workshop Press

When you really need power to get the job done, the HSP-100A pneumatic shop press is the best you can get for the money. \n \nAny shop would love the 100 tons of raw power that this press can deliver. A fully welded frame made from plate steel helps add rigidity for less flex and more accurate pressing. Like all Baileigh Industrial products, it is covered by a 1 year warranty and designed to last years in any shop environment. \n \nThe HSP-100A shop press uses industrial-grade hydraulic components to deliver the power. \n \nA heavy-duty 165mm movable hydraulic cylinder is a great benefit when working on off-center parts. \n \nThe HSP-100A has a 300mm stroke length that is controlled using a foot pedal. If even more control is needed a hand operated lever is also included. \n \nThe HSP-100A from Baileigh Industrial also includes a set of V-blocks for even more value.

GBP 7999.99
1

Baileigh MSS-16F Shrinker/Stretcher

Baileigh MSS-16F Shrinker/Stretcher

When you want the best manual metal shrinking machine on the market, look no further than the MSS-16F from Baileigh Industrial. The MSS-16F metal shrinker is built right using our years of knowledge we have gained through the sale of our other metal forming machines. With a maximum capacity of 16 gauge mild steel and 14 gauge aluminum, this is truly a professional metal workers machine. \n \nThe MSS-16F is so easy to operate, that anyone can become a metal shaper. The foot pedal operation is great because it leave the operators hands free to handle the panel they are trying to shape. The MSS-16F also has a large 6 throat depth for getting deep within a panel. \n \nEverything on the MSS-16F is adjustable, forming depth, forming pressure, and even how much marring will happen to the material, with optional jaws. The MSS-16F even has quick change jaws to make forming faster.

GBP 2199.99
1

Baileigh R-M3 Manual Roll Bender

Baileigh R-M3 Manual Roll Bender

Ever have the need to work with small material under 6.5mm? If so, the R-M3 from Baileigh Industrial might be you answer. The Baileigh Industrial R-M3 metal ring roller is perfect for any fabrication shop with smaller capacity applications. The R-M3 roll bender makes precise bending of small rod (up to 6.5mm) easy. Artists, technical schools, and home shops can find hundreds of uses to keep this well built angle roll in use every single day. \n \nUnlike some other versions of this ring roller that are available, the Baileigh R-M3 is made using only the best plate steel, ensuring years of productivity. \n \nThe R-M3 is a single pinch metal ring roller that can be bench or pedestal mounted. It has fine adjustment for the top roll and to power this ring roller there is a long manual hand crank. \n \nDont be fooled by it small size, the R-M3 is a workhorse when the job is right.

GBP 599.99
1

Baileigh Vertical Mill VM-626-1

Baileigh Vertical Mill VM-626-1

Perfect for the small shop or even a garage at your house. The VM-626-1 vertical mill from Baileigh Industrial is the best choice mill for anyone just getting into machining. This is a small but powerful machine that can handle just about any job you can throw at it. The VM-626-1 has an 6 x 26 working table and operates on 240 volt power. \n \nThe VM-626-1uses a step pulley system that allows adjustment to the speed from 230 to 2500 rpm. Being able to tune the speed of the quill is important to prolong the life of the tooling and saving money. An R8 spindle is standard and having an R8 allows a wide variety of tooling that is readily available in just about any tooling store. \n \n6"x 26" work table \nCompact size \nR8 spindle \nPerfect for milling, drilling, tapping, boring, and reaming \nHeadstock can tilt 90 degree \n9 speeds \n240V

GBP 6999.99
1

Baileigh EW-37HD Heavy Duty English Wheel

Baileigh EW-37HD Heavy Duty English Wheel

If professional metal shaping is what you do, then you know the importance of a good quality english wheel. Baileigh industrial has come up with what we feel is the best wheel on the market, the EW-37HD. It has a massive 37 throat depth and a super large opening for even the most extreme curved panels. Made from twin 5/8 thick steel plates, the EW-37HD is one of the most rigid english wheels on the market not to mention one of the heaviest. The EW-37HD weighs in at just less than 1600 pounds \n \nEverything on this wheel is adjustable, including the caster and camber of the bottom anvil. The EW-37HD comes with eight 3 wide bottom anvils in the following radii; flat, 36, 24, 12, 8, 6, 4, and 2. The upper wheel is a robust 10 diameter x 3 wide. These sizes will handle almost any wheeling application you can think of. It also incorporates a quick release with internal locking cam for easy panel removal.

GBP 11999.99
1

Baileigh BS-127P - 2003548

Baileigh BS-127P - 2003548

The BS-127P portable band saw is portable and can be used almost anywhere. We designed this manual, variable-speed model for small shops and hobbyists. \n \n127mm round capacity. \nMiters 60 to the right. \nSwivel-head miter adjustment (instead of vise adjustment) delivers more accurate cuts and doesnt compromise the holding power of the vise. \nVariable blade speed from 75 to 246 fpm. \nYou can adjust the inverter-driven speed to achieve the best cut possible for a given material and increase blade life. \nStop rod makes sure that your material will stop at the same length every time to deliver repeatable results. \nComes standard with adjustable ball bearing blade guides that you can move as close to the material as possible for accurate cuts. \nElectronic trigger handle lets you easily turn the saw on and off. \nWeighs just 56 lbs., so you can transport it to project sites. \nBaileigh covers this metal band saw with a 1-year parts warranty. \nWe keep most replacement parts in stock for fast deliveries. \nIncludes lifetime technical support by phone. Call us up whenever you run into a problem with the saw or need application advice.

GBP 1129.99
1

Baileigh PH-19VS Reciprocating Hammer Variable Speed

Baileigh PH-19VS Reciprocating Hammer Variable Speed

The PH-19VS takes over where the PH-19 reciprocating power hammer leaves off. By adding an inverter drive to an already potent machine, Baileigh Industrial raised the bar again. When precise speed control is needed for those delicate jobs, the PH-19VS shines. Powered by 220 volts, the PH-19VS allows the operator to control the beats per minute from 0 to 1700. The beats are controlled by either a foot pedal or a control box on the side of the machine, it is your choice. \n \nThe PH-19VS was designed from the MH-19, to give a more economical way to shape metal fast. Baileigh Industrial believes the PH-19VS is the best reciprocating power hammer on the market, bar none. It has the ability to shrink, stretch, dome, edge turn, bead, and offset with the readily available tooling. \n \nIt also has a large 19 deep throat and a tooling quick release handle which allows the operator to start working in the middle of the panel while keeping the working pressure constant. A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.

GBP 23499.99
1

Baileigh HSP-66M Hydraulic Workshop Press

Baileigh HSP-66M Hydraulic Workshop Press

This heavy-duty press is built using only the best quality components and craftsmanship. A fully welded 3/8 plate steel frame will take more than the 66 tons that the industrial-grade hydraulic system can throw at it. \n \nWeighing is at just over 685kgs, you know that this press is made to last. \n \nThe robust 2hp, 400 volt, three phase motor has two working speeds; a rapid descent speed and a slow approach speed. There is also an option for the operator to use a hand pump for even more control. Once the job is done, the HSP-66M H-frame press has an automatic cylinder return. \n \nThe table on the HSP-66M is nothing short of remarkable. Fabricated to exacting tolerances, the table features two support pins that are 2 in diameter and allow the table to be locked in at the correct working height. \n \nThe HSP-66M also includes lifting chains to help with the placement of the table. \n \nOther features of the HSP-66M H-frame press include a pressure regulator, ram cap, chrome piston, head screw, and a cylinder that is moveable left or right within the framework itself.

GBP 11999.99
1

Baileigh DC-2100C Dust Collector Cyclone

Baileigh DC-2100C Dust Collector Cyclone

The DC-2100C 3HP cyclone dust collector for sale was designed to be the best on the market with no part of the design process over looked. The 220 volt single phase 3 hp motor is designed to run all day long and stay cooler than others in the industry. The DC-2100C also uses a unique style fan to produce a whopping 2111 CFM, more than enough air flow to overcome some of the resistance that is brought on by the piping from machine to collector. It even has remote start and shut off for convenience. \n \nThe DC-2100C has a 63 gallon capacity drum, tis collector is truly designed to be used and abused. But when it is time to empty, it has quick release lever that allows the drum to slide right out. It also has casters for portability. \n \nThe DC-2100C 3HP cyclone dust collector for sale has a one micron canister to ensure that fine dust doesn't get back into the shop. Cleaning the canister is fast with a manual turn crank that allows the dust to call into a plastic bag for easy removal and disposal. \n \nPeace of mind with a 2 year warranty.

GBP 2799.99
1

Baileigh BB-4012F Box & Pan Folder

Baileigh BB-4012F Box & Pan Folder

Baileigh Industrials BB-4012F finger brake allows the operator to clamp the material with his or her foot, so both hands are free for perfect positioning of the sheet metal before clamping the material in place. \n \nAlthough different from other sheet metal brakes on the market, the BB-4012F is definitely a machine built form the best possible components. \n \nThe BB-4012F finger brake comes standard with hardened fingers in an assortment of different widths to accommodate bending various sizes and shapes of tanks, pans, boxes and much more. \n \nAnother nice feature of the BB-4012F box and pan brake is an easy-to-adjust gap adjustment, this is important to get a correct bend when braking various gauges of sheet metal. A spring loaded cylinder assists lifting the apron which gives assistance to the operator when bending at full capacity, which is an impressive 2.5mm mild steel at a full 40 inches. \n \nThe BB-4012F sheet metal brake also features hardened fingers and bending die for long life and years for use along with an adjustable stop-rod. \n \nThe BB-4012F, like all of Baileigh Industrials box and pan brakes, is typically in stock for fast shipment.

GBP 2999.99
1

Baileigh BB-3616E Box & Pan Folder

Baileigh BB-3616E Box & Pan Folder

Sometimes a job requires a more delicate machine to get the job done. The large robust sheet metal brakes that most metal fabrication shops haves might be too difficult to operate when working with short pieces of sheet metal. \n \nThat is where the BB-3616E finger brake fits in, its small size allows for easier operation while not sacrificing on quality. \n \nBuilt to the best standards, but at an economical price. \n \nThe BB-3616E sheet metal folder has an assortment of 10 fingers to allow for fabricating various depths and sizes of boxes and pans out of sheet metal that is 16 gauge mild steel or thinner. This finger brakes heavy-duty construction consists of plate steel and an electrowelded frame work that allows for crisp bend angles even at the middle of the beam at full capacity. \n \nThis finger brake has a heavy counterweight to assist lifting the apron, which comes in handy when bending at full capacity. There is a finger gap adjustment on the right and left of the bend brake to allow for different gauges of material. \n \nThe BB-3616E box and pan brake is typically in stock for quick shipments. For further questions regarding the BB-3616E or any of the entry level finger brakes.

GBP 1399.99
1