ProfitSpring | B2B PPC Agency

Baileigh CS-350M Manual Coldsaw

If you are looking for a circular coldsaw that can last for years in any environment, then look at the CS-350M from Baileigh Industrial. Simply put, the CS-350M is the best coldsaw on the market for the price. The CS-350M has a maximum capacity of 108mm round at 90, and is the perfect choice for all fabrication cutting jobs like marine rails, playground equipment, hand railing, and various chassis applications. The CS-350M has the ability to mitre from 45 to the right to 90 on the left, perfect for slotting applications. \n \nThe CS-350M is built to exacting specifications; and includes many features that are not available on other saws in its price range, such as a unique self-centering vice that keeps the material perfectly centered with the blade for perfect cuts. The CS-350M also has a direct-drive head with ground and hardened gears for long life, and to ensure tight tolerances are kept throughout the life of the saw, the CS-350M has a backlash adjustment. To ensure long blade life this circular coldsaw has an industrial-grade flood coolant system as well. \n \nThe CS-350M has two speeds at which the blade can turn, 26rpm and 52rpm with its robust 4hp, 400 volt, three phase motor. The two speeds are important when cutting multiple types of materials.

GBP 13299.99

1

Baileigh CS-275M Manual Coldsaw

Have a shop that uses a coldsaw on a daily basis? If you do, look at the heavy-duty CS-275M manually operated coldsaw from Baileigh Industrial. This 11 manual coldsaw has many features. \n \nWith a maximum capacity of 2.75 round at 90, this saw is the perfect choice for jobs like marine rails, playground equipment, hand railing, and various chassis applications. The CS-275M has the ability to mitre from 45 to the right, and to 90 on the left, perfect for slotting applications. \n \nThe CS-275M has a 3hp motor that is run by 400 volt, 50hz, three phase power. It has two speeds, 60rpm and 120rpm. This is especially important when cutting multiple types of material. A good rule of thumb is lower speeds for mild steel and higher speeds for materials like aluminum. The direct drive head features all metal gears that are ground and hardened for long life, and to ensure tight tolerances are kept throughout the life of the saw, the CS-275M has a backlash adjustment. \n \nThe vice on the CS-275M coldsaw is self-centering and is unique because it keeps the material perfectly centered with the blade for absolutely perfect cuts.

GBP 4599.99

1

Baileigh CS-315EU Manual Coldsaw

The CS-315EU is the flagship of our EU line of coldsaws. The CS-315EU is designed to give any shop years of service without breaking the bank. The CS-315EU coldsaw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor coupled to a direct-drive gearbox that allows the blade to cut through the material chatter free which increases blade life. \n \nThe saw has a thick cast iron base making it very rigid. The CS-315EU includes a heavy-duty steel stand that is set at the optimal cutting height. \n \nThis is the perfect machine for small to medium fabricating shops, and best yet it requires just 220 volt, 50hz, single phase power. \n \nThe CS-315EU runs at 52rpm. Perfect for mild steel cutting, but will also handle other material with the appropriate blade. Like all other Baileigh circular coldsaws, it comes with a powerful integrated coolant pump that cools the blade and washes chips away. \n \nThe CS-315EU can mitre 45 to the left and 45 to the right. The vice has a taper lock system that helps increase production when a lot of cutting is required. \n \nThe vice on the CS-315EU coldsaw clamps on both sides of the cut increasing blade life. The vice jaws are serrated for maximum hold.

GBP 3799.99

1

Baileigh DP-1000VS Variable Speed Drill Press

The DP-1000VS variable speed drill press has a very wide column to eliminate flexing when drilling at full capacity. \n \nThe base and table are made from a very rigid casting adding to the strength of this 1" maximum capacity drilling machine. \n \nThe inverter driven head allows the machinist or fabricator to run tooling at the proper speed for each drill or tap size available. \n \nRunning at the exact speed extends tooling life, something that can't be accomplished on other drills like pulley driven styles. The DP-1000VS drill press also comes with a coolant system, safety guarding and a halogen light.

GBP 5499.99

1

Baileigh CS-350EU Manual Coldsaw

Baileigh Industrial's revolutionary CS-350EU coldsaw will change the way you think about coldsaws. The CS-350EU is a unique 350mm circular coldsaw which features a true inverter that drives the motor. This inverter allows the blade speed to be adjusted from 24rpm to 120rpm. This range of RPM covers most of the cutting applications that this coldsaw will encounter. \n \nThe CS-350EU coldsaw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor, coupled to a direct-drive gearbox, that allows the blade to cut through the material chatter free, increasing blade life. The CS-350EU coldsaw has a thick cast iron base, mounted on a steel stand, making it very rigid. \n \nThe Baileigh Industrial CS-350EU circular coldsaw can mitre 45 to the left and 45 to the right. The vice has a taper lock system that helps increase production when a lot of cutting is required. The vice clamps on both sides of the cut increasing blade life. The vice jaws are serrated for maximum hold. \n \nLike all other Baileigh circular coldsaws, the CS-350EU comes with a powerful coolant pump that cools the blade and washes chips away. This is the perfect machine for any fabrication shop and better yet it requires just 220 volt, single phase, 50hz power. This machine offers great value for a small price.

GBP 6499.99

1

Baileigh TN-300 Tube Notcher - 2004675

The TN-300 tube and pipe notcher from Baileigh Industrial is the best production hole saw notcher on the market today. \n \nThis 220 volt, 50hz, single phase notcher is built using only the best components. The idea of the TN-300 was to get rid of the hand drill of the TN-250 and make a better tool for the fabricators. By building a rigid base and tying all the components together, we were able to reduce vibration created from the holesaw itself as it went through the material. \n \nNext we changed the RPM of the holesaw bit to 233rpm. This speed seemed to give the best combination of saw life and speed of cut. \n \nBoth of these changes helped make a more accurate cut and increase the life of the saws, saving time and money. \n \nThe TN-300 can notch from 1/2" to 3" (13mm to 76mm) tube. \n \nThe vice has a quick release feature so different notch angles can be set up in a second or two and locked-in with a solid taper lock. A large degree wheel for indexing the vice is also included. \n \nOperation of the TN-300 is easy. Turn it on, grab the hand wheel and rotate it toward the material. The carriage rides on a solid V-block roller assembly that pushes the holesaw into the material with limited vibration. This simple unique design on this tube notcher makes notching tube and pipe easy.

GBP 5999.99

1

Baileigh BS-350M Dual Mitering Bandsaw 440V

Have a job that requires multiple angles in both left and right direction? If so the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast iron head and bow that swivels 60 right and 45 left. The BS-350M has a 90 round capacity of 267mm, making this the perfect saw for almost any fabrication shop. \n \nThe BS-350M features a 3hp motor which is driven by an AC inverter built to deliver the reliability that most shops demand. \n \nThe BS-350M is built to make the straightest, highest quality cuts on the market. This is achieved through the use of the best materials, such as fully cast iron that is machined to exacting tolerances as well as precision ball bearing guides, which provide the most accurate cuts and long blade life. A full flood coolant system is also standard on the BS-350M. \n \nOperation of the BS-350M is easy as well; there are two mode of operation depending on you preference. The first option is manual descent for small production runs. The operator simply turns on the machine with a trigger switch in the descent handle, and manually guides the bandsaw blade through the material. This mode is perfect for the small or medium sized fabricators needs. The second option is to use the hydraulic descent. The hydraulic descent has a down feed adjustment for feed pressure, and is perfect for larger production runs, increases blade life and reduces operator fatigue.

GBP 11399.99

1

Baileigh BS-210M Bandsaw - 2000091

You can control the descent of the BS-210M in 2 ways: manually (with a trigger switch) or with a hydraulic descent featureusually seen only on more expensive models. \n \nWith a good mix of features at an economical price, this saw is ideal for small-to-medium machine shops or even garage or home shops. \n1.5 hp motor requires only 240 volts to run, so you can use it anywhere. \n177mm round maximum capacity at 90. \nSwivel head miters up to 60 and doesnt compromise the holding power of the vise. \nCast iron saw head and bow reduce vibrations and help to produce clean, accurate cuts. \nAccepts standard blades. \nYou can adjust the infinitely variable blade speed from 66 to 280fpm, controlled by an inverter, to produce quality cuts and prolong blade life. \nAdjustable blade guides, attached to sealed ball bearings, get as close to the material as possible to keep alignment straight and prolong blade life. \nControl the hydraulic descent pressure and choose the right speed to make a perfect cut for a given application. \nNo need to monitor the machine! You can walk away; the blade will automatically stop once its done cutting the metal. \nFully-welded steel plate frame stabilises the machine and gives it the structural strength to cut at maximum capacity without straining. \n1-year (12 month) warranty. \nBoth the saw and replacement parts are usually in stock for next day deliveries. \nLifetime technical support by phone lets you call our knowledgeable engineers whenever you need troubleshooting or advice on applications.

GBP 3999.99

1

Baileigh Vertical Mill VM-1054-3

Table size is very important when deciding which milling machine to buy. The VM-1054 from Baileigh Industrial has a 10 x 54 table that has been hardened, ground, polished, and coated with a special coating called Turcite B to extend life and help to eliminate corrosion. \n \nThe VM-1054 is a variable speed milling machine that is powered by Yaskawa inverter. This inverter is powered by 400 volts of three phase power. Inverters are great for milling machines because of their ability to be adjusted to any speed desired between 0 and 3800 rpm. By selecting the right speed tooling life is lengthened and cut quality improves, both of which saves money. Baileigh Industrial selected an DIN2080 taper for its spindle to help improve performance as well. A larger spindle is stronger and has tighter tolerances over a longer period of time. Rigidity is also very important on a mill that is why Baileigh Industrial went with only the best castings to make the base and frame work out of. The stronger you make he platform the better the cutting is. \n \nAll three axis are powered on the VM-1054 making it easy on the operator. Another nice feature of the VM-1054 milling machine is the two axis digital readout that comes standard. This Mitutoyo digital readout is accurate to 1/10 of 1 thousandth of an inch. A flood coolant system, air draw bar, and central lubrication system are all factory installed on the VM-1054.

GBP 40999.99

1

Baileigh SF-5216E Manual Foot/Treadle Guillotine

When looking for a high-quality, economical foot shear for your shop, look no further than the SF-5216E foot shear from Baileigh Industrial. The SF-5216E foot shear is great for those small to medium shops or educational institutions that are on a budget. \n \nHowever, the best thing is that the SF-5216E is still is built to the same standards as all Baileigh Industrial equipment. \n \nThe SF-5216E foot shear is able to shear 52 of 16 gauge mild steel. High-chromium blades offer long life and have the ability to be resharpened. Front supports help the operator with alignment and an integrated back stop allows for repeatability of cut. A ridged cast frame completes the list of impressive features on the SF-5216E.

GBP 2999.99

1

Baileigh DP-1000E Drill Press - 2041053

This economical belt driven drill press runs smoothly even at full capacity - the DP-1000E is a 15-1/2" drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life. \n \nBelt driven head drills a maximum capacity of 1 steel. \n5 speeds in the range from 250 to 2900 rpm to suit your application. \n3-1/8" steel column eliminates flexing even when drilling at full capacity. \nRigid cast iron base and table add strength to the drills structure. \nIncludes a safety shield around the drill head to protect you. \nBaileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone

GBP 2499.99

1

Baileigh DP-0625E Drill Press - 2041052

This economical belt driven drill press runs smoothly even at full capacity - this 14" drill press lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life. \n \n.5 hp motor requires 110 volt power and will work at any shop or site. \nBelt driven head drills a maximum capacity of 5/8 steel. \n5 speeds in the range from 250 to 2900 rpm to suit your application. \n2-7/8" steel column eliminates flexing even when drilling at full capacity. \nRigid cast iron base and table add strength to the drills structure. \nIncludes a safety shield around the drill head to protect you. \nBaileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone

GBP 1999.99

1

Baileigh SN-V04-MS Corner Notcher

Ever have odd angles that you need to notch perfectly from sheet metal? Enter the SN-V04-MS. \n \nThis great machine is a 400 volt, 50hz, three phase, variable angle sheet notcher. This notcher will cut notches from 30 to 140 in mild steel up to 6mm in thickness and will do this at up to 15 strokes per minute. \n \nThe oversized 27 x 23.5 table includes table guides and mitre blocks to ensure accurate notches every time. The SN-V04-MS variable angle notcher has 8.5 long blades that are negatively raked to pull the material to the stops during the cut. \n \nThe blades can also be resharpened many times for even more life and cost savings. \n \nBlade gap is adjusted with the use of hand wheels and the notching stroke is controlled by a foot pedal.

GBP 29999.99

1

Baileigh DP-1500VS Variable Speed Drill Press

Baileigh's DP-1500VS heavy-duty drill press comes with power feed and a quality auto-reversing tap feature. This is a quality made machine using only the best quality castings and base metals to ensure rigidity when drilling at maximum capacity with the power downfeed. \n \nThe base and drill table is made from a heavy casting that has oversized T-slots for secure clamping of a vice or fixture. \n \nThis variable speed drill press has an inverter-driven head of which the quill speed can be properly adjusted to each different drill size that really will extend tooling life. \n \nAdjustments to the speed can be done by a speed potentiometer dial, noting the RPM is displayed on the digital read out. \n \nAdditional standard features of this quality floor type drill press are a safety guard with limit switch, a powerful coolant system, and a bright halogen light.

GBP 6999.99

1

Baileigh MPS-8g Manual Guillotine

Cutting sheets of thin steel plate should be easy. \n \nThe MPS-8G from Baileigh Industrial is a bench mounted, multi-purpose manual sheet metal shear that will make your life easier. \n \nThe MPS-8G is perfect for those small fabrication shops that do not have a lot of room or space for larger more permanently mounted machinery. The MPS-8G manual shear uses a gear system that is connected to the pull-down handle for more efficiency, allowing .236" mild steel to be cut with ease. \n \nA handy material hold down is also included. The 8 blade length also allows for the cutting of a full 7 piece of sheet metal. The blades are polished for longevity and are fully adjustable for blade gap. \n \nThe MPS-8G manual shear from Baileigh Industrial would be a great addition to any shop

GBP 449.99

1

Baileigh BS-260M Dual Mitering Bandsaw

Over the years the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it and made it even better. Gone is the day of the DC driver board to adjust the blade speed, now the BS-260M has an AC inverter for even better control and reliability, the best part is that it still is powered by only 220V, 50Hz, 1-phase single phase so it can be used just about anywhere. \n \nThe gear driven BS-260M is a 9" (229 mm) Band Saw is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick releases head lock allows the operator to change the miter angle in seconds. \n \nThe BS-260M band saw is made form only the best materials for long production life. The saw bow and pivot is made from solid cast iron to ensure the straightest of cuts with little to no vibration. A total of eight precision ball bearings are provided to keep the blade in line as well. The BS-260M also has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks for safety. \n \nOperation of the BS-260M is easy as well; there are two mode of operation depending on you preference. 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the band saw blade through the material this mode is perfect for the small or medium sized fabricators needs. 2- Hydraulic descent for larger production runs increases blade life and reduces operator fatigue. The hydraulic descent has a down feed adjustment for feed pressure.

GBP 8999.99

1

Baileigh CS-350SA Semi-automatic Coldsaw

Do you have the need for more production from your current cut-off saw? The CS-350SA from Baileigh industrial might just be the right choice. \n \nIt is a great production saw for any shop that is cutting thin, medium, or thick walled pipe, tubing, extrusions, or solid bar stock. \n \nDesigned from the CS-350M, this design has proven itself to be one of the best production saws on the market. The head of the CS-350SA is made from heavy-duty cast iron and has a self centering vice that is unique because it keeps the material perfectly centered with the blade for absolutely perfect cuts. \n \nThe blade of the CS-350SA is direct drive and run by a 4hp motor that requires 400 volt, three phase power. The head features all metal gears that are ground and hardened for a long life, and to ensure tight tolerances are kept throughout the life of the saw, the CS-350SA has a backlash adjustment. The CS-350SA has two operating speeds, 22rpm and 44rpm. \n \nCapacity on the CS-350SA cut-off saw is also impressive because of its massive 14 blade. It features a 4.25 round capacity at 90 degrees and has the ability to cut 45 degrees to the right and 90 degrees to the left. The 90 degree cut is important if you have any applications that call for slotting. \n \nOperation of the CS-350SA semi-automatic coldsaw is easy as well. Just place the material in the vice and push the foot pedal. The vice will clamp the material; the blade will start up and lower itself cutting the material. Once the cut is complete, the blade will shut off and the head will raise back up. This process saves the time and effort of the operator, and will also make the shop more efficient.

GBP 15299.99

1

Baileigh TN-250 Tube Notcher - 2004663

Ever have to notch tube in an awkward place, such as on a bend? Well good luck getting a tight clamp with a conventional tube notcher on the market. \n \nBaileigh Industrial took this challenge head on and came up with what many claim to be the best holesaw tube notcher on the planet, the TN-250. \n \nThe TN-250 tube notcher is like nothing that you have seen. The life blood of the notcher is the unique self-centering radial vice that allows the operator to clamp down on tubes and more in any direction, including in the middle of a bend. \n \nAlso by using a truly self-centering vice, the TN-250 is the only holesaw tube notcher that is always centered left to right and up and down, no matter what size tube or pipe you have. \n \nBut, the vice is not the only thing that sets the TN-250 apart from the competition; the back bone is made from heavy-duty 19mm steel plate and all components interlock to create a very rigid platform to reduce vibration and prolong the life of the holesaws. The shaft of the TN-250 is a 32mm Thompson shaft that rides in sealed and oiled needle bearings. Unlike other tube notchers in this category, the two ends of the shaft are completely replaceable. This helps save time and money. \n \nThe TN-250 holesaw tube notcher can notch up to 64mm OD and allows large degree angles. The notching carriage can pivot up to 220 allowing the operator to come from the back side of the notch. \n \nA large degree plate helps get these back side notches lined up. The TN-250 also has a fully adjustable axis to accommodate almost any notch combination considering the pivot moves left to right up to 220, there are two slotted mounting rails for almost any position of the bearing block, and finally we have the easily adjusted position for up and down.

GBP 1899.99

1

Baileigh Vertical Mill VM-626-1

Perfect for the small shop or even a garage at your house. The VM-626-1 vertical mill from Baileigh Industrial is the best choice mill for anyone just getting into machining. This is a small but powerful machine that can handle just about any job you can throw at it. The VM-626-1 has an 6 x 26 working table and operates on 240 volt power. \n \nThe VM-626-1uses a step pulley system that allows adjustment to the speed from 230 to 2500 rpm. Being able to tune the speed of the quill is important to prolong the life of the tooling and saving money. An R8 spindle is standard and having an R8 allows a wide variety of tooling that is readily available in just about any tooling store. \n \n6"x 26" work table \nCompact size \nR8 spindle \nPerfect for milling, drilling, tapping, boring, and reaming \nHeadstock can tilt 90 degree \n9 speeds \n240V

GBP 6999.99

1

Baileigh SN-F04-MS Corner Notcher

If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. \n \nThe SN-F04-MS is the great for making perfect corners in metal that are impossible with hand tools. This corner notcher has a 6mm mild steel capacity, so it can make quick work of most any job. The SN-F04-MS corner notcher has blades that are fixed at 90, ensuring a perfect notch every time. A 650mm x 650mm oversized working table includes table guides, for even more accuracy. \n \nThe SN-F04-MS sheet metal notcher has 215mm long blades that can be flipped and resharpened many times for even more life and cost savings. The blades are also negatively raked to pull the material to the stops during the cut, for the most accuracy available. The SN-F04-MS sheet metal notcher comes with a powerful 400 volt, 50hz, three phase motor for years of notching. With an operator controlled foot pedal, the SN-F04-MS is capable of 15 strokes per minute.

GBP 12999.99

1

Baileigh SH-5214 Hydraulic Guillotine

The SH-5214 hydraulic shear from Baileigh Industrial is a machine that should be in every sheet metal fabrication shop. \n \nThis 52 shear will cut 14 gauge mild steel over its full length and operates on 220 volt, single phase power. The SH-5214 comes with an adjustable back gauge for precise repeatability. It also comes with table guides and front arm extensions. \n \nThe SH-5214 is like all other Baileigh Industrial compact hydraulic shears in that the upper carriage is built to minimise any deformation and the upper and lower blades have multiple shearing edges, both qualities extending blade life and save your shop money. \n \nThe operator console has the control option to jog the upper carriage, produce one cut with one foot pedal push, or remain in an auto mode by holding the foot pedal down. \n \nThe SH-5214 also has hydraulic hold downs that hold the sheet solidly to the table not allowing the material to lift when being sheared. \n \nThe SH-5214 hydraulic shear is a great tool for a great price.

GBP 16999.99

1

Baileigh Vertical Mill VM-836E - E0B77EDE1D8E

The VM-836E vertical mill from Baileigh Industrial is the perfect mill for anyone just getting into machining. This small but powerful machine is based off of our popular VM-936E mill and offers many of the same features for a fraction of the cost. The VM-836E has an 8 x 36 working table and operates on 240 volt power making it perfect for any environment. \n \nThis Baileigh Industrial vertical mill uses a step pulley system that allows adjustment to the speed from 80 to 2720 rpm. Being able to tune the speed of the quill is important to prolong the life of the tooling and saving money. An R8 spindle is standard and having an R8 allows a wide variety of tooling that is readily available in just about any tooling store. \n \n 8"x 36" work table \n Compact size \n R8 spindle \n Perfect for milling, drilling, tapping, boring, and reaming \n Headstock can tilt 90 degree \n 8 speeds \n 240V

GBP 8499.99

1

Baileigh PH-19VS Reciprocating Hammer Variable Speed

The PH-19VS takes over where the PH-19 reciprocating power hammer leaves off. By adding an inverter drive to an already potent machine, Baileigh Industrial raised the bar again. When precise speed control is needed for those delicate jobs, the PH-19VS shines. Powered by 220 volts, the PH-19VS allows the operator to control the beats per minute from 0 to 1700. The beats are controlled by either a foot pedal or a control box on the side of the machine, it is your choice. \n \nThe PH-19VS was designed from the MH-19, to give a more economical way to shape metal fast. Baileigh Industrial believes the PH-19VS is the best reciprocating power hammer on the market, bar none. It has the ability to shrink, stretch, dome, edge turn, bead, and offset with the readily available tooling. \n \nIt also has a large 19 deep throat and a tooling quick release handle which allows the operator to start working in the middle of the panel while keeping the working pressure constant. A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.

GBP 23499.99

1

Baileigh BS-127P - 2003548

The BS-127P portable band saw is portable and can be used almost anywhere. We designed this manual, variable-speed model for small shops and hobbyists. \n \n127mm round capacity. \nMiters 60 to the right. \nSwivel-head miter adjustment (instead of vise adjustment) delivers more accurate cuts and doesnt compromise the holding power of the vise. \nVariable blade speed from 75 to 246 fpm. \nYou can adjust the inverter-driven speed to achieve the best cut possible for a given material and increase blade life. \nStop rod makes sure that your material will stop at the same length every time to deliver repeatable results. \nComes standard with adjustable ball bearing blade guides that you can move as close to the material as possible for accurate cuts. \nElectronic trigger handle lets you easily turn the saw on and off. \nWeighs just 56 lbs., so you can transport it to project sites. \nBaileigh covers this metal band saw with a 1-year parts warranty. \nWe keep most replacement parts in stock for fast deliveries. \nIncludes lifetime technical support by phone. Call us up whenever you run into a problem with the saw or need application advice.

GBP 1129.99

1

Baileigh PL-1340E Economical Precision Lathe

Baileigh Industrials PL-1340E metal working lathe offers the perfect solution for small to medium sized machine shops as well as schools that are looking to upgrade outdated equipment without using up their budget. As with all Baileigh Industrial gear head metal lathes, the PL-1340E comes standard with precision ground and hardened ways offering years of tight tolerances. The castings on the PL-1340E are also of the highest quality to ensure smooth chatter free cuts to prolong tooling life. \n \nThe Baileigh Industrial PL-1340E is powered by 220v single phase system. It also has 8 spindle speed that range from 70 to 2000 rpm. The Baileigh Industrial PL-1340E metal working lathe includes many features that the others do not; digital read out, three and four jaw chucks, steady rest, follow rest, face plate, live center, foot brake, coolant system, halogen work light, quick change tool post, and much more making this a great value for anyone. \n \nLike all Baileigh Industrial products, this metal lathe is designed using the highest quality components. Using only the highest quality components ensures years of worry free operation.