88 results (0,21406 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Bessey UK16 UniKlamp UK 160/80 Clamp, BE104600

Bessey UK16 UniKlamp UK 160/80 Clamp, BE104600

Clamping force up to 1,500 N Parallel jaw faces with extra-large contact surfaces Clamping of various shapes, along the whole length of the rail Universally applicable Light and easy-to-handle No need for tools for switching between clamping and spreading On carded hang pack Parallel jaw faces, The large, flat jaw faces made from impact- and fracture-resistant reinforced polyamide are almost parallel. For gentle clamping of a very wide range of -different shapes over the entire length of the rail, without spacers. High-quality profiled rail, The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. Removable end stop, The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.

GBP 30.99
1

Bessey UK60 UniKlamp Capacity 600mm BESUK60

Bessey UK60 UniKlamp Capacity 600mm BESUK60

UniKlamp is ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.

GBP 22.99
2

Bessey TG16K Malleable Cast Iron Screw Clamp TG 160/80 Tommy Bar, BE100025

Bessey TG16K Malleable Cast Iron Screw Clamp TG 160/80 Tommy Bar, BE100025

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 0.00
1

Bessey TG20B6 Malleable Cast Iron Screw Clamp TG 200/60 Wood Handle, BE100430

Bessey TG20B6 Malleable Cast Iron Screw Clamp TG 200/60 Wood Handle, BE100430

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 26.99
1

Bessey TG50S17-2K Malleable Cast Iron Screw Clamp TG 500/1752 Piece Plastic Handle, BE200405

Bessey TG50S17-2K Malleable Cast Iron Screw Clamp TG 500/1752 Piece Plastic Handle, BE200405

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 74.99
1

Bessey TG100S17 Malleable Cast Iron Screw Clamp TG 1000/175 Wood Handle, BE100289

Bessey TG100S17 Malleable Cast Iron Screw Clamp TG 1000/175 Wood Handle, BE100289

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 109.99
1

Bessey TG25K Malleable Cast Iron Screw Clamp TG 250/120 Tommy Bar, BE107700

Bessey TG25K Malleable Cast Iron Screw Clamp TG 250/120 Tommy Bar, BE107700

Clamping force up to 6,000 N Tommy bar with rounded ends for simple transfer of force when clamping Pressure plates can be replaced by hand no tools required With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 49.99
1

Bessey TG30-2K Malleable Cast Iron Screw Clamp TG 300/1402 Piece Plastic Handle, BE200064

Bessey TG30-2K Malleable Cast Iron Screw Clamp TG 300/1402 Piece Plastic Handle, BE200064

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 49.99
1

Bessey TG40S12K Malleable Cast Iron Screw Clamp TG 400/120 Tommy Bar, BE107712

Bessey TG40S12K Malleable Cast Iron Screw Clamp TG 400/120 Tommy Bar, BE107712

Clamping force up to 6,000 N Tommy bar with rounded ends for simple transfer of force when clamping Pressure plates can be replaced by hand no tools required With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 53.99
1

Bessey TPN25S10BE Malleable Cast Iron Screw Clamp TPN 250/100 Wood Handle, BE107764

Bessey TPN25S10BE Malleable Cast Iron Screw Clamp TPN 250/100 Wood Handle, BE107764

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 41.99
1

Bessey TG80S14-2K Malleable Cast Iron Screw Clamp TG 800/1402 Piece Plastic Handle, BE200421

Bessey TG80S14-2K Malleable Cast Iron Screw Clamp TG 800/1402 Piece Plastic Handle, BE200421

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 82.99
1

Bessey TGK80-2K Heavy Duty Malleable Cast Iron Screw Clamp TGK 800/1202 Piece Plastic Handle, BE200110

Bessey TGK80-2K Heavy Duty Malleable Cast Iron Screw Clamp TGK 800/1202 Piece Plastic Handle, BE200110

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 81.99
1

Bessey TG60S17 Malleable Cast Iron Screw Clamp TG 600/175 Wood Handle, BE100420

Bessey TG60S17 Malleable Cast Iron Screw Clamp TG 600/175 Wood Handle, BE100420

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 89.99
1

Bessey TG50S14 Malleable Cast Iron Screw Clamp TG 500/140 Wood Handle, BE100400

Bessey TG50S14 Malleable Cast Iron Screw Clamp TG 500/140 Wood Handle, BE100400

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 79.99
1

Bessey TGK250 Heavy Duty Malleable Cast Iron Screw Clamp TGK 2500/120 Wood Handle, BE100188

Bessey TGK250 Heavy Duty Malleable Cast Iron Screw Clamp TGK 2500/120 Wood Handle, BE100188

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 169.99
1

Bessey TP100S14BE Malleable Cast Iron Screw Clamp TP 1000/140 Wood Handle, BE107689

Bessey TP100S14BE Malleable Cast Iron Screw Clamp TP 1000/140 Wood Handle, BE107689

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 79.99
1

Bessey TPN80S14BE Malleable Cast Iron Screw Clamp TPN 800/140 Wood Handle, BE107857

Bessey TPN80S14BE Malleable Cast Iron Screw Clamp TPN 800/140 Wood Handle, BE107857

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 71.99
1

Bessey TPN40BE Malleable Cast Iron Screw Clamp TPN 400/175 Wood Handle, BE107800

Bessey TPN40BE Malleable Cast Iron Screw Clamp TPN 400/175 Wood Handle, BE107800

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 59.99
1

Bessey TG50S12-2K Malleable Cast Iron Screw Clamp TG 500/1202 Piece Plastic Handle, BE200336

Bessey TG50S12-2K Malleable Cast Iron Screw Clamp TG 500/1202 Piece Plastic Handle, BE200336

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 55.99
1

Bessey TPN16BE-2K Malleable Cast Iron Screw Clamp TPN 160/802 Piece Plastic Handle, BE107737

Bessey TPN16BE-2K Malleable Cast Iron Screw Clamp TPN 160/802 Piece Plastic Handle, BE107737

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 21.99
1

Bessey TPN50S14BE Malleable Cast Iron Screw Clamp TPN 500/140 Wood Handle, BE107834

Bessey TPN50S14BE Malleable Cast Iron Screw Clamp TPN 500/140 Wood Handle, BE107834

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 63.99
1

Bessey TG30S10 Malleable Cast Iron Screw Clamp TG 300/100 Wood Handle, BE100264

Bessey TG30S10 Malleable Cast Iron Screw Clamp TG 300/100 Wood Handle, BE100264

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 49.99
1

Bessey TPN30B8BE Malleable Cast Iron Screw Clamp TPN 300/80 Wood Handle, BE107770

Bessey TPN30B8BE Malleable Cast Iron Screw Clamp TPN 300/80 Wood Handle, BE107770

Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 32.99
1

Bessey TG25S10-2K Malleable Cast Iron Screw Clamp TG 250/1002 Piece Plastic Handle, BE200250

Bessey TG25S10-2K Malleable Cast Iron Screw Clamp TG 250/1002 Piece Plastic Handle, BE200250

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 42.99
1

Bessey TPN25BE-2K Malleable Cast Iron Screw Clamp TPN 250/1202 Piece Plastic Handle, BE107761

Bessey TPN25BE-2K Malleable Cast Iron Screw Clamp TPN 250/1202 Piece Plastic Handle, BE107761

Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth) Integrated BESSEY anti-slip system, Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. Reinforced malleable iron clamps, Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces. High-quality profiled rail, The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. Pressure plate, For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

GBP 35.99
1