170 results (0,14774 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

C-Tec FPROK1 FosMeter-Pro Hearing Loop Test Kit

C-Tec FPROK1 FosMeter-Pro Hearing Loop Test Kit

C-Tec FPROK1 FosMeter-Pro Hearing Loop Test KitSigNET recommends all its induction loop systems are tested using a Fosmeter Pro Induction Loop Test Kit FPROK1. Designed to simplify the setup of an induction loop system to the latest version of BS EN 60118-4 Magnetic field strength in audio-frequency induction loops for hearing aid purposes the kit includes an FPRO Fosmeter Pro induction loop tester cw intuitive display and simple to follow test menus a calibrated signal generator cw pre-loaded test tones and a set of headphones.As well as checking the magnetic field strength of an induction loop system it also measures background noise frequency response metal compensation AND allows you to listen to the loop signal. The tester and signal generator are each powered by a 9V PP3 battery and both are supplied in protective canvas carrying cases.Key FeaturesA must-have accessory for all AFILSinstallers and service engineers.Simplifies the setup of an induction loop system to BS EN 60118-4 Magnetic field strength in audio-frequency induction loops for hearing aid purposes.Includes an FPRO Fosmeter Pro induction loop tester cw intuitive display and simple to follow test menus a calibrated FPROSG Signal Generator cw pre-loaded test tones voice and music samples and a set of HEAD1 headphones.Checks the magnetic field strength of an induction loop system and measures background noise frequency responseandmetal compensation.Loop listening circuitry allows subjective listening tests to be carried out using the headphones supplied.Powered from a 9V PP3 battery.Supplied in a protective canvas carrying case.Auto power-off function helps to preserve battery life.

GBP 551.70
1

C-Tec CP414VV CAST-PRO Smoke Heat Multisensor cw Voice Sounder amp C-3-9.4 White VAD

C-Tec CP414VV CAST-PRO Smoke Heat Multisensor cw Voice Sounder amp C-3-9.4 White VAD

C-Tec CP414VV CAST-PRO Smoke Heat Multisensor cw VoiceSounder C-3-9.4 White VADA multiple functionality in a single device smoke heat multisensor fire detection plus an 86dbA voice sounder and a C-3-9.4 VAD detects real fires quickly reduces false alarms effectively and indicatestrue alarm conditions decisively.Key FeaturesCertified to EN54-3 5 7 17 23 29.Compatible with C-TECs ZFP touchscreen-controlled CASTprotocol addressable fire panel.MASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditions.Drift compensation functionality.Onboard short circuit loop isolator.Includes two 8mm x 2mm ultra-bright red LED indicatingstrips.Multiple detection modes and different sensitivities fordifferent times of the day.Six selectable voice messages with tones 2 evacuate 1alert 1 all clear 2 system test messages.24.9mA max. alarm current max vol VAD on.590uA typical quiescent current 40V DC.Compatible with C-TECs CA408 CAST base cwintegrated locking mechanism ID tag.

GBP 160.57
1

C-Tec CP411VV CAST-PRO CO Fire Smoke Heat Multisensor cw Voice Sounder amp C-3-9.4 White VAD

C-Tec CP411VV CAST-PRO CO Fire Smoke Heat Multisensor cw Voice Sounder amp C-3-9.4 White VAD

C-Tec CP411VV CAST-PRO CO Fire Smoke Heat Multisensor cw Voice Sounder C-3-9.4 White VADMultiple functionality in a single device CO fire smoke heat multisensor fire detection plus an 86dbA voice sounder and C-3-9.4 White VAD. It detectsreal fires quickly reduces false alarms effectively and indicates true alarmconditions decisively and is certified to EN54-3 5 7 17 29 31.Compatible with C-TECs ZFP touchscreen-controlled CASTprotocol addressable fire panel.Key FeaturesMASC Miniature Advanced Smoke Detection Chamber andAFFIRM algorithms provide incredible tolerance to false alarms whilstenhancing the detection of real fire conditionsDrift compensation functionalityOnboard short circuit loop isolatorIncludes two 8mm x 2mm ultra-bright red LED indicatingstripsMultiple detection modes and different sensitivities fordifferent times of the daySix selectable voice messages with tones 2 evacuate 1alert 1 all clear 2 system test messages17.1mA max. alarm current max vol VAD on630uA typical quiescent current 40V DCCompatible with C-TECs CA408 CAST base cw integratedlocking mechanism ID tag

GBP 185.98
1

C-Tec FiTT EVC Line Tester

C-Tec FiTT EVC Line Tester

C-Tec FiTT EVC Line TesterThe FiTT line tester is an easy to use test set which allows you to test the wiring for a SigTEL Type A fire telephone outstation andor a SigTEL Type B disabled refuge outstation prior to its connection to an appropriate SigTEL exchange unit.The FiTT is supplied with a non-rechargeable 9 volt PP3 alkaline battery allowing approximately 28 hours use and all the test cables and connectors you need. Always replace the battery with a non-rechargeable 9 volt PP3 alkaline battery. Do not use a rechargeable battery.

GBP 329.02
1

C-Tec BF456ACXW Addressable Base VAD Sounder C-3-8

C-Tec BF456ACXW Addressable Base VAD Sounder C-3-8

C-Tec BF456ACXW Addressable Base VAD Sounder C-3-8The BF456ACXW C-3-8 Addressable Base VAD Sounder is compatible with C-TECs XFPZFP XP95Discovery Addressable Fire Panels. Its designed to be ceiling mounted - either stand-alone with a red or white cap or as part of a stacked SounderVADDetector Base combination.Key FeaturesThird-party certified to EN54-3 Sounders EN54-23 VADs and 17 Isolators by the LPCBProvides C-3-8 light distribution min 0.4 lux over a 3 x 8m cylindrical areaSupplied with a BF431QCP quick connect plate and detector spur wiresImpressive 96dBA sound output 1mOnboard short-circuit loop isolator550A quiescent current14mA alarm current 24V DC VAD lit sounder on maxGroup addressing facility allows multiple devices to be operated simultaneously7 selectable volume levels and up to 15 selectable tone pairsOptional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone useIP21C ratedPlease note The detector does not come with the base sounder it is shown in the image for illustrative purposes only.

GBP 48.60
1

C-Tec FPROSG Calibrated Audio Signal Generator

C-Tec FPROSG Calibrated Audio Signal Generator

C-Tec FPROSG Calibrated Audio Signal GeneratorEnsure your induction loop systems meet current British standards with C-Tecs innovative and very cost-effective new FPROSG Audio Signal Generator. Factory calibrated to provide a fixed audio signal the generator includes all of the test tones required to test an AFILS to BS 7594 1 kHz sine wave frequency response and metal compensation plus speech and music tracks to assist with subjective testing.

GBP 252.58
1

C-Tec BF460ACXW Addressable Base VAD C-3-8

C-Tec BF460ACXW Addressable Base VAD C-3-8

C-Tec BF460ACXW Addressable Base VAD C-3-8The C-Tec BF460ACXW is an addressable VAD beacon base which is ideal for use with the Apollo protocol range of C-Tec XFP and ZFP fire alarm control panels.The Base Mount range of addressable loop-powered bases includes sounders visual alarm devices VADs and combined sounder VADs. They are designed for use with C-TECs ZFPXFP panels and other Apollo Discovery compatible fire panels.Their purpose is to visually and audibly alert building occupants of a fire alarm.All bases can be optionally used as eithera stand-alone base using a separately available locking white cap BF330CTLIDW red cap BF330CTLIDR ora combined base and Apollo detector Apollo detectors are separately available.The bases offer low current consumption high sound output high efficiency VADs seven selectable volume levels 15 selectable tone pairs and built-in short-circuit loop isolators. The combined sounder and VAD on the BF432ACXW and BF456ACXW bases can be set to operate independently of each other panel dependent function.All bases excluding BF432ACXW and BF459ACXW are fully certified with all relevant sections of the fire alarm device standards EN 54-3 Sounders EN 54-23 Visual alarm devices - VADs and EN 54-17 Short-circuit isolators.Key FeaturesProvides C-3-8 light distribution min 0.4 lux over a 3 x 8m cylindrical areaSupplied with a BF431QCP quick connect plate and detector spur wiresOnboard short-circuit loop isolator550A quiescent current10mA alarm current 24V DCGroup addressing facility allows multiple devices to be operated simultaneouslyOptional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone useIP21C rated

GBP 33.95
1

C-Tec BF319 Fire Alarm Control Panel Mains Key Switch

C-Tec BF319 Fire Alarm Control Panel Mains Key Switch

C-Tec BF319 Fire Alarm Control Panel Mains Key SwitchAhigh-quality lockable double pole Fire Alarm Control Panel Mains key switch. Allows the Mains supply to a fire alarm panelto be switched on or offin accordance with BS 5839-1.Ideal for use during routine test and maintenance e.g. battery test main board replacement etc.Note ifworking on the Mains in the panel you must also follow correct practice and isolate the Mains supply at the distribution board.Key FeaturesFits on a standard UK 47mm flush or surface mount back box.Supplied with 2 x M3.5 25mm fixing screws.BS EN60669-1 compliant.

GBP 17.15
1

C-Tec BF456CCCW ActiV Conventional Base Sounder VAD C-3-8.5

C-Tec BF456CCCW ActiV Conventional Base Sounder VAD C-3-8.5

C-Tec BF456CCCW ActiV Conventional Base Sounder VAD C-3-8.5The ActiV Base Mount range of conventional sounders and combined sounder visual alarm devices VADs are designed for use with C-TECs range of fire panels and other compatible third-party panels. However compatibility testing with third-party panels is recommended to ensure correct operation. Their purpose is to visually and audibly alert building occupants of a fire alarm.The BF456CCCW base sounder VAD offer low current consumption high sound output high efficiency VADs 31 selectable primary tones with selectable secondary tone set two selectable volume levels and three selectable VAD flash rates. Tones volume levels and VAD flash rates are changed using the bases 8-way DIP switch.All bases can be optionally used as eithera stand-alone base device using a separately available locking white cap BF330CTLIDW red cap BF330CTLIDR ora combined base device and detector detectors are separately available and wired on a separate detection circuit. The base devices are compatible with C-TECs range of ActiV conventional detectors and other compatible third-party suppliers.Key FeaturesThird-party certified to EN54-3 SoundersandEN54-23 VADsProvides C-3-8.5 light distribution min 0.4 lux over a 3 x 8.5m cylindrical areaImpressive 96dBA sound output 1m31 selectable primary andsecondary tone pairs and two volume levels high and lowThree selectable VAD flash rates 0.5Hz 1Hz OFFAlarm Current at 30Vdc 12.2mA 0.5Hz or 19.5mA 1HzAlarm Current at 18Vdc 14.5mA 0.5Hz or 25mA 1HzOptional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone useSupplied with a BF431QCP quick connect plate and detector spur wiresIP21C rated

GBP 39.78
1

C-Tec APXM XLR 3 Pin Microphone Plate

C-Tec APXM XLR 3 Pin Microphone Plate

C-Tec APXM XLR 3 Pin Microphone PlateThe Outreach Plate audio input extension system comprises a range of wall ceiling and desk mountable plates specifically designed to increase the audio input capability of any audio system. Covering the most common variants of audio connectors they work by mixing the signals from various audio input sources into a single balanced line level input on a compatible amplifier. Each input plate features a built-in mixer preamp input level control and balanced output.Typically up to 10Outreach plates any mix can be daisy-chained to one balanced line level connection with cable lengths up to 100m easily achievable using standard two-pair audio cable i.e. Belden 8723. Each plate requires four wires two balanced line LineA LineA one ground GND and one power connection V 12-32V d.c..Most of C-TECs PDA Range induction loop amplifiers are fitted with an Outreach connection socket as standard. For audio systems that do not have an Outreach socket straightforward network connection can be achieved using an APV 24V 250mA d.c. regulated power supply and an APXO 3 pin XLR balanced line output plate.Key FeaturesAccepts balanced or unbalanced microphones with standard 3 pin XLR connectors.Part of C-TECs patented Outreach Plate audio input extension system.Compatible with C-TECs entire range of PDA102 200E Pro-Rangeand ML1 induction loop amplifiers.Can be connected to any third-party audio or induction loop amplifier using an APV 24V 250mA power supply.Mounts on a 25mm standard UK single gang back box.

GBP 47.30
1

C-Tec Addressable Compact C-3-8 Ceiling VAD cw 90dBA Sounder - BF451ACXSW

C-Tec Addressable Compact C-3-8 Ceiling VAD cw 90dBA Sounder - BF451ACXSW

C-Tec Addressable Compact C-3-8 Ceiling VAD cw 90dBA Sounder - BF451ACXSWBF451ACXSW Compact Addressable Ceiling VAD cw 90dBA Sounder utilises the latest advances in sounder LED and LED lens technology to provide a truly exceptional C-3-8 fire alarm warning device.Compatible with C-TECs ZFP XFP range of Apollo XP95Discovery addressable fire panels its 550A quiescent current and low 14mA alarm current VAD lit sounder on max make it one of the most efficient EN54-323 compliant sounderVADs on the market.Other features include seven selectable volume levels15 tone pairs a flash rate of 0.5Hz once every two seconds and a group addressing function to ensure the synchronised operation of multiple devices.Attractively finished in white polycarbonate the BF451ACXSW comes with an integrated sounder VADbase locking mechanism and a plastic ID tag.The BF451ACXSW can also be used to provide W-2.4-3.5 coverage when mounted on a wall.Key FeaturesThird-party certified to EN54-3 Sounders EN54-23 VADs and 17 Isolators by Intertek pendingProvides C-3-8 light distribution when ceiling mounted min 0.4 lux over a 3 x 8m cylindrical areaCan also provide W-2.4-3.5 light distribution when wall mounted min. 0.4 lux over a 2.4 x 3.5m cuboid areaImpressive 90dBA sound output 1mUnique C-TEC designed lens maximises light output whilst minimising current drawOnboard short-circuit loop isolator550uA quiescent current14mA alarm current 24V DC VAD lit sounder on maxAttractively finished in white polycarbonate light output is whiteGroup addressing facility allows multiple devices to be operated simultaneously7 selectable volume levels and up to 15 selectable tone pairsAttractive compact design - just 102mm diameter 63mm deepIncludes an integrated sounder to base locking mechanismIP21C ratedLow current consumption means multiple devices can be connected to the loopDIP switch addressedSimple click and twist design and easy-fit base ensures rapid installation timeAlso available in a red plastic housing order code BF451ACXSR

GBP 47.84
1