158 results (0,13350 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

C-Tec FF396-2 FP10 10Z Fire Repeater Panel

C-Tec FF396-2 FP10 10Z Fire Repeater Panel

C-Tec FF396-2 FP10 10Z Fire Repeater PanelThe Repeater Panel displays the zones from which a fire condition has been initiated by illumination of a steady red lights.When the alarm sounders are silenced at the main control panel the zone lights on the Repeater Panel are extinguished and the Fault light is illuminated. This state is maintained until the main control panel is Reset or other Zones are triggered.The Fault light is also illuminated in the case of a Lamp Test or fault condition at the main control panel. The nature of the fault is not indicated and must be determined at the Main Control Panel.When mains power to the whole Fire Alarm system is correct then a green Mains On light is illuminated.The Repeater Panel has an integral fault sounder which mimics the Main Control Panel fault sounder and thus can be muted from the main control panel.

GBP 306.76
1

C-Tec XFP510-16 XFP Repeater Panel 16 Zone

C-Tec XFP510-16 XFP Repeater Panel 16 Zone

C-Tec XFP510-16 XFP Repeater Panel 16 ZoneCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances. Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3. Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel. Communication between the XFP Main panel and Repeater requires a CFP761 network driver card fitted as standard in all XFP510-16s available as an optional extra on Main XFP 16 Zone panels. Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.Key FeaturesCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances.Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3.Includes an on-board fault relay.Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.Communication between the XFP Main panel and Repeater requires a CFP761 network driver card fitted as standard in all XFP510-16s available as an optional extra on Main XFP 16 Zone panels.Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

GBP 315.26
1

C-Tec XFP510-32 XFP Repeater Panel 32 Zone

C-Tec XFP510-32 XFP Repeater Panel 32 Zone

C-Tec XFP510-32 XFP Repeater Panel 32 ZoneCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances. Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3. Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel. Communication between the XFP Main panel and Repeater requires an AFP711 network driver card fitted as standard in all XFP510-32s available as an optional extra on Main XFP 32 Zone panels. Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.Key FeaturesCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances.Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3.Includes an on-board fault relay.Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.Communication between the XFP Main panel and Repeater requires an AFP711 network driver card fitted as standard in all XFP510-32s available as an optional extra on Main XFP 32 Zone panels.Repeater network is non-redundant and wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

GBP 433.36
1

C-Tec BF319 Fire Alarm Control Panel Mains Key Switch

C-Tec BF319 Fire Alarm Control Panel Mains Key Switch

C-Tec BF319 Fire Alarm Control Panel Mains Key SwitchAhigh-quality lockable double pole Fire Alarm Control Panel Mains key switch. Allows the Mains supply to a fire alarm panelto be switched on or offin accordance with BS 5839-1.Ideal for use during routine test and maintenance e.g. battery test main board replacement etc.Note ifworking on the Mains in the panel you must also follow correct practice and isolate the Mains supply at the distribution board.Key FeaturesFits on a standard UK 47mm flush or surface mount back box.Supplied with 2 x M3.5 25mm fixing screws.BS EN60669-1 compliant.

GBP 17.15
1

C-Tec SAP501ECA SAP Sprinkler Panel 1 Loop 16z CAST

C-Tec SAP501ECA SAP Sprinkler Panel 1 Loop 16z CAST

C-Tec SAP501ECA SAP Sprinkler Panel 1 Loop 16z CASTA 1 loop SAP Sprinkler Panel on the CAST protocol.Key FeaturesIdeal for monitoring up to 255 sprinkler flow switchesOne CAST CA730 input output unit required per monitored flowswitchUtilises the same technology as C-TECs popular XFPaddressable fire panelUp to 16 sprinkler zone indicators available assignable viathe panels PC programming toolsAttractive flush or surface mountable plastic enclosureCombined keypad or keyswitch entry

GBP 416.69
1

C-Tec EP203 3 Zone Automatic Extinguisher Panel LPCB Certified - EP203

C-Tec EP203 3 Zone Automatic Extinguisher Panel LPCB Certified - EP203

C-Tec EP203 3 Zone Automatic Extinguisher Panel LPCB Certified - EP203The EP203 three zone automatic extinguisher panel has been specifically designed for use in areas housing expensive dangerous or irreplaceable items of equipment. Third-party approved by the LPCB to EN 12094-1 the European standard for Fixed Firefighting Systems - Components for Gas Extinguishing Systems and EN54 parts 2 and 4 the panel epitomises quality durability and reliability.Featuring an intuitive 128 x 64 pixel two-colour graphic display that gives clear and concise feedback to the user installer and commissioning engineer the panel also includes six monitored inputs including hold and abort a time stamped log adjustable flood times and volt-free changeover relays for fire local fire 1st stage active 2nd stage active extractor fan and fault.The panel is supplied in an elegantly styled durable enclosure with all of its electronics - apart from its powerful 3A EN54-4 switch mode PSU - mounted on a detachable metal bridge plate for ease of installation. A wide range of ancillaries are also available including remote status units hold-off and abort buttons line terminators and output expansion relay boards.Key FeaturesThird-party LPCB certificated to EN 12094 part 1 and EN54 parts 2 and 4Functions as a standard three zone fire panel with additional circuitry for controlling the release of fire-suppressing gas into protected areasUnique 128 x 64 pixel graphical display facilitates straightforward system programmingAny combination of activated zones can be programmed to automatically start the panels extinguishant release sequenceIncludes a pull-down front-panel manual release button and two keyswitches for accessing the panels functions and toggling between automanual modeThree conventional sounder circuits two x 1st stage one x 2nd stagePowerful 3A EN54-4 compliant switch mode PSULow quiescent current - less than 40mA on mains failWide range of monitored inputs and auxiliary outputs see schematicAbort and hold inputs allow the panels release sequence to be cancelled or suspended at any timeTime-stamped event logRS485 connections for up to eight flush or surface remote status units with their own LCDs manual release and mode automanual switches. Single gang economy status units without an LCD are also available.Extensive range of commissioning and engineering functionsOptional relay expansion boards and single gang abort and hold buttonsIdeal for use in computer rooms telecommunication centres archive storage areas chemical plants generator rooms museums etc..System line terminator included with all panels

GBP 399.43
1

C-Tec ZFP Standard 1 Loop Touchscreen Panel with Blank Module

C-Tec ZFP Standard 1 Loop Touchscreen Panel with Blank Module

C-Tec ZFP Standard 1 Loop Touchscreen Panel with Blank ModuleCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1049.62
1

C-Tec ZFP2X Standard 2 Loop Touchscreen Panel with Blank Module

C-Tec ZFP2X Standard 2 Loop Touchscreen Panel with Blank Module

C-Tec ZFP Standard 2 Loop Touchscreen Panel with Blank ModuleCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1458.20
1

C-Tec ZFP2MCA ZFP 2 Loop Panel 5A Cast - Medium Cabinet

C-Tec ZFP2MCA ZFP 2 Loop Panel 5A Cast - Medium Cabinet

C-Tec ZFP2MCA ZFP 2 Loop Panel 5A Cast - Medium CabinetA feature-rich touchscreen-controlled addressable fire panelwith C-Tec CAST compatible loop drivers.Created with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesThird-party certified to EN54 parts 2 4 and 13Multiple off-the-shelf variants or build your own panelusing our ZFP selection chartsRapid loop learn flexible cause effects and powerfulsystem diagnosticsHi-integrity fault-tolerant RS485 networking option allowsup to 128 network nodes 64 main panels and 64 Compact ControllersOptional A-Bus expansion PCBs paging and graphicinterface facilitiesENVISION Enabled fullly compatible with C-TECs new Cloudbased data managementremote access softwareIntuitive PC programming toolsMedium cabinet

GBP 1640.72
1

C-Tec FF388-2 FP8 8 Zone Fire Panel

C-Tec FF388-2 FP8 8 Zone Fire Panel

C-Tec FF388-2 FP8 8 Zone Fire PanelThe C-Tec FF388-2 is an 8 zone conventional fire alarm control panel from their FP range of panels.Key FeaturesInstaller-friendly designRobust metal enclosure cw lift off lid heavy-duty base connectionsEight conventional Zone circuits expandable to 14Two conventional Sounder circuitsSeparate indicators for open short circuit fault sounder fault and batterypower supply faultNon-latching class change sounder output latching fire non-latching fault outputs via expansion loomShort circuitfire facility pre-1980 BS no resistors in call points selectable on a zone by zone basisAncillary connections for repeaters other system add-ons including fault relay modules fire relay modules sounder delay relay modules sounder extender kits etcMulti-lingual variants subject to quantitiesSpace for 2 x 12V 7Ah VRLA batteriesCompatible with virtually all known conventional fire detectors including C-TECs ActiV rangeDesigned to comply with BS 5839-4 this panel in not compliant with EN54-24 and should NOT be used in new UK or European installations

GBP 734.06
1

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 20 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1585.91
1

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 20 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1174.74
1

C-Tec ZFP Standard 4 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 4 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 4 Loop Touchscreen Panel with 20 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1991.96
1

C-Tec ZFP4LX Large 4 Loop Touchscreen Panel with 5 Blank Modules

C-Tec ZFP4LX Large 4 Loop Touchscreen Panel with 5 Blank Modules

C-Tec ZFP Large 4 Loop Touchscreen Panel with 5 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 2313.73
1

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 40 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 40 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 40 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1217.53
1

C-Tec ZFP4MX Medium 4 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP4MX Medium 4 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 4 Loop Touchscreen Panel with 3 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 2186.05
1

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 40 Zonal LEDs

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 40 Zonal LEDs

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 40 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1626.25
1

C-Tec ZFP2MX Medium 2 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP2MX Medium 2 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 2 Loop Touchscreen Panel with 3 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1777.44
1

C-Tec ZFP Medium 8 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 8 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 8 Loop Touchscreen Panel with 3 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 3312.91
1

C-Tec ZFP2LCA ZFP 2 Loop Panel 5A Cast - Large Cabinet

C-Tec ZFP2LCA ZFP 2 Loop Panel 5A Cast - Large Cabinet

C-Tec ZFP2LCA ZFP 2 Loop Panel 5A Cast - Large CabinetA feature-rich touchscreen-controlled addressable fire panelwith C-Tec CAST compatible loop drivers.Created with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesThird-party certified to EN54 parts 2 4 and 13Multiple off-the-shelf variants or build your own panelusing our ZFP selection chartsRapid loop learn flexible cause effects and powerfulsystem diagnosticsHi-integrity fault-tolerant RS485 networking option allowsup to 128 network nodes 64 main panels and 64 Compact ControllersOptional A-Bus expansion PCBs paging and graphicinterface facilitiesENVISION Enabled fullly compatible with C-TECs new Cloudbased data managementremote access softwareIntuitive PC programming toolsLarge cabinetPlease note The image is for illustrative purposes only.

GBP 1758.59
1