242 results (0,14291 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

C-Tec BF319 Fire Alarm Control Panel Mains Key Switch

C-Tec BF319 Fire Alarm Control Panel Mains Key Switch

C-Tec BF319 Fire Alarm Control Panel Mains Key SwitchAhigh-quality lockable double pole Fire Alarm Control Panel Mains key switch. Allows the Mains supply to a fire alarm panelto be switched on or offin accordance with BS 5839-1.Ideal for use during routine test and maintenance e.g. battery test main board replacement etc.Note ifworking on the Mains in the panel you must also follow correct practice and isolate the Mains supply at the distribution board.Key FeaturesFits on a standard UK 47mm flush or surface mount back box.Supplied with 2 x M3.5 25mm fixing screws.BS EN60669-1 compliant.

GBP 17.15
1

C-Tec FF396-2 FP10 10Z Fire Repeater Panel

C-Tec FF396-2 FP10 10Z Fire Repeater Panel

C-Tec FF396-2 FP10 10Z Fire Repeater PanelThe Repeater Panel displays the zones from which a fire condition has been initiated by illumination of a steady red lights.When the alarm sounders are silenced at the main control panel the zone lights on the Repeater Panel are extinguished and the Fault light is illuminated. This state is maintained until the main control panel is Reset or other Zones are triggered.The Fault light is also illuminated in the case of a Lamp Test or fault condition at the main control panel. The nature of the fault is not indicated and must be determined at the Main Control Panel.When mains power to the whole Fire Alarm system is correct then a green Mains On light is illuminated.The Repeater Panel has an integral fault sounder which mimics the Main Control Panel fault sounder and thus can be muted from the main control panel.

GBP 306.76
1

C-Tec FF388-2 FP8 8 Zone Fire Panel

C-Tec FF388-2 FP8 8 Zone Fire Panel

C-Tec FF388-2 FP8 8 Zone Fire PanelThe C-Tec FF388-2 is an 8 zone conventional fire alarm control panel from their FP range of panels.Key FeaturesInstaller-friendly designRobust metal enclosure cw lift off lid heavy-duty base connectionsEight conventional Zone circuits expandable to 14Two conventional Sounder circuitsSeparate indicators for open short circuit fault sounder fault and batterypower supply faultNon-latching class change sounder output latching fire non-latching fault outputs via expansion loomShort circuitfire facility pre-1980 BS no resistors in call points selectable on a zone by zone basisAncillary connections for repeaters other system add-ons including fault relay modules fire relay modules sounder delay relay modules sounder extender kits etcMulti-lingual variants subject to quantitiesSpace for 2 x 12V 7Ah VRLA batteriesCompatible with virtually all known conventional fire detectors including C-TECs ActiV rangeDesigned to comply with BS 5839-4 this panel in not compliant with EN54-24 and should NOT be used in new UK or European installations

GBP 734.06
1

C-Tec EFP1 Single Zone Conventional Fire Alarm Panel

C-Tec EFP1 Single Zone Conventional Fire Alarm Panel

C-Tec EFP1 Single Zone Conventional Fire Alarm PanelInstaller-friendly design.Robust metal enclosure with heavy-duty base connections.One conventional Zone circuit Two conventional Sounder circuits.Separate indicators for open short circuit fault sounder fault and batterypower supply fault.Non-latching class change sounder output latching fire non-latching fault outputs via optional expansion loom.Short circuitfire facility pre-1980 BS no resistors in call points selectable on a zone by zone basis.Multi-lingual variants subject to quantities.Space for 2x 12V 2.3Ah VRLA batteries.Compatible withvirtually all known conventional fire detectors includingC-TECs ActiV range.Designed to comply with BS 5839-4 this panel in not compliant with EN54-24 and should NOT be used in new UK or European installations.

GBP 179.35
1

C-Tec XFP510-32 XFP Repeater Panel 32 Zone

C-Tec XFP510-32 XFP Repeater Panel 32 Zone

C-Tec XFP510-32 XFP Repeater Panel 32 ZoneCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances. Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3. Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel. Communication between the XFP Main panel and Repeater requires an AFP711 network driver card fitted as standard in all XFP510-32s available as an optional extra on Main XFP 32 Zone panels. Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.Key FeaturesCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances.Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3.Includes an on-board fault relay.Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.Communication between the XFP Main panel and Repeater requires an AFP711 network driver card fitted as standard in all XFP510-32s available as an optional extra on Main XFP 32 Zone panels.Repeater network is non-redundant and wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

GBP 433.36
1

C-Tec XFP510-16 XFP Repeater Panel 16 Zone

C-Tec XFP510-16 XFP Repeater Panel 16 Zone

C-Tec XFP510-16 XFP Repeater Panel 16 ZoneCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances. Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3. Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel. Communication between the XFP Main panel and Repeater requires a CFP761 network driver card fitted as standard in all XFP510-16s available as an optional extra on Main XFP 16 Zone panels. Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.Key FeaturesCan be used to repeat the functions of an XFP Main panel at remote parts of a site e.g. all potential fire service entrances.Offers all of the functions and controls of an XFP Main panel access levels 1 2 and 3.Includes an on-board fault relay.Requires its own dedicated Mains power and battery back-up supply.A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.Communication between the XFP Main panel and Repeater requires a CFP761 network driver card fitted as standard in all XFP510-16s available as an optional extra on Main XFP 16 Zone panels.Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

GBP 315.26
1

C-Tec ZFP2MCA ZFP 2 Loop Panel 5A Cast - Medium Cabinet

C-Tec ZFP2MCA ZFP 2 Loop Panel 5A Cast - Medium Cabinet

C-Tec ZFP2MCA ZFP 2 Loop Panel 5A Cast - Medium CabinetA feature-rich touchscreen-controlled addressable fire panelwith C-Tec CAST compatible loop drivers.Created with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesThird-party certified to EN54 parts 2 4 and 13Multiple off-the-shelf variants or build your own panelusing our ZFP selection chartsRapid loop learn flexible cause effects and powerfulsystem diagnosticsHi-integrity fault-tolerant RS485 networking option allowsup to 128 network nodes 64 main panels and 64 Compact ControllersOptional A-Bus expansion PCBs paging and graphicinterface facilitiesENVISION Enabled fullly compatible with C-TECs new Cloudbased data managementremote access softwareIntuitive PC programming toolsMedium cabinet

GBP 1640.72
1

C-Tec ZFP2LCA ZFP 2 Loop Panel 5A Cast - Large Cabinet

C-Tec ZFP2LCA ZFP 2 Loop Panel 5A Cast - Large Cabinet

C-Tec ZFP2LCA ZFP 2 Loop Panel 5A Cast - Large CabinetA feature-rich touchscreen-controlled addressable fire panelwith C-Tec CAST compatible loop drivers.Created with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesThird-party certified to EN54 parts 2 4 and 13Multiple off-the-shelf variants or build your own panelusing our ZFP selection chartsRapid loop learn flexible cause effects and powerfulsystem diagnosticsHi-integrity fault-tolerant RS485 networking option allowsup to 128 network nodes 64 main panels and 64 Compact ControllersOptional A-Bus expansion PCBs paging and graphicinterface facilitiesENVISION Enabled fullly compatible with C-TECs new Cloudbased data managementremote access softwareIntuitive PC programming toolsLarge cabinetPlease note The image is for illustrative purposes only.

GBP 1758.59
1

C-Tec ZFP Standard 1 Loop Touchscreen Panel with Blank Module

C-Tec ZFP Standard 1 Loop Touchscreen Panel with Blank Module

C-Tec ZFP Standard 1 Loop Touchscreen Panel with Blank ModuleCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1049.62
1

C-Tec ZFP2X Standard 2 Loop Touchscreen Panel with Blank Module

C-Tec ZFP2X Standard 2 Loop Touchscreen Panel with Blank Module

C-Tec ZFP Standard 2 Loop Touchscreen Panel with Blank ModuleCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1458.20
1

C-Tec ZFP2MX Medium 2 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP2MX Medium 2 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 2 Loop Touchscreen Panel with 3 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1777.44
1

C-Tec ZFP Standard 4 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 4 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 4 Loop Touchscreen Panel with 20 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1991.96
1

C-Tec ZFP4LX Large 4 Loop Touchscreen Panel with 5 Blank Modules

C-Tec ZFP4LX Large 4 Loop Touchscreen Panel with 5 Blank Modules

C-Tec ZFP Large 4 Loop Touchscreen Panel with 5 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 2313.73
1

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 40 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 40 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 40 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1217.53
1

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 2 Loop Touchscreen Panel with 20 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and singlepath networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1585.91
1

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 20 Zonal LEDs

C-Tec ZFP Standard 1 Loop Touchscreen Panel with 20 Zonal LEDsCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Attractive 450 x 462 x 127mm cabinet medium and large sized cabinets also available.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 1174.74
1

C-Tec ZFP Medium 8 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 8 Loop Touchscreen Panel with 3 Blank Modules

C-Tec ZFP Medium 8 Loop Touchscreen Panel with 3 Blank ModulesCreated with the input of some of the worlds leading fire alarm and life safety experts the ZFP is the powerful touchscreen controlled fire alarm panel that everyones been waiting for.Designed and built in the UK the panel can be configured to suit any application. From small one out all out systems to large multi-loop networked systems with sophisticated cause and effects the ZFP can handle them all with ease.Simply tap the option you require and away you go. Whether youre the responsible person on site the installer the commissioning engineer or the emergency services you can access the information you require quickly and easily - all at the touch of a virtual button.Creating a sophisticated fire alarm system for an airport hospital university tower block hotel football stadium or other large building is just a few steps up from establishing a simple one out all out system for a small factory unit.All this and full compliance with EN54 parts 2 and 4 means that the ZFP is rapidly becoming the fire panel of choice for the fire industry worldwide.Key FeaturesCertified to EN54 parts 2 and 4 by Intertek.Apollo XP95Discovery protocol.Up to 4 loops per panel 6 to 8 loops available in medium and large sized cabinets.Up to 64 eight-loop peer to peer panel network capacity.Hi-integrity and single path networking options.Very flexible cause and effects.Wide range of Switch Indicator modules.Multiple A-Bus expansion PCBs IO Units Relays etc.User-friendly full colour touchscreen with dynamic buttons and virtual QWERTY keyboard.Up to 100 separate and programmable zonal LEDs 200 on medium and large sized cabinets.10000 programmable and indicatable detection zones.Up to 38 characters of custom text per loop device.Automatic daylight saving BSTGMT mode.20000 event memory filterable by fire fault date.Non-fire supervisory event functionality.Optional thermal printers.Well-designed cabinets with easily removable electronics chassis.20-way heavy-duty brass earth bar as standard.72-hour standby 30 min alarm in standard cabinets.Built-in loop status current-reading.Powerful engineering and commissioning functions including SafeMode and DeviceManager.Attractive Compact Controllers.Wide range of flush-fit bezels and attractive glazed stainless-steel framesFULLY compatible with C-TEC manufactured addressable ancillaries Hush Buttons Sounders Voice Sounders and BeaconsPowerful and intuitive PC programming toolsWide range of supported languages

GBP 3312.91
1