Canadian Spa Co "Fix-a-Leak" Repair Sealant - For Hot Tubs & Swim Spas
Canadian Spa Co "Fix-a-Leak" Repair Sealant - For Hot Tubs & Swim Spas Works with all Hot Tubs and Swim Spas Introducing Fix-A-Leak: Your Solution for Spa, Hot Tub, and Pool Leaks Product Overview: Discover Fix-A-Leak, a powerful concentrated solution designed to address leaks in spas, hot tubs, and pools in a cost-effective and convenient manner. Before considering drastic measures such as patio removal or professional assistance, give this solution a try. Volume: 8oz Recommended Amounts: For spa leaks: Use one 8oz bottle per 4,500 litres (1,000 gallons). For pool leaks: Use four 8oz bottles for pools up to 100,000 litres (22,000 gallons). Effective Sealing: Fix-A-Leak is engineered to locate and fill voids as small as 1/8" in diameter. Minor drips or leaks may require less product, while larger leaks may necessitate multiple treatments. Step-by-Step Repair: Measure water loss over 24 hours and determine required Fix-A-Leak amount. Fill spa to original level and mark water line. Remove filter cartridge or filtering devices. Shake the bottle well, optionally warming it in hot water before shaking. With pump(s) running, add Fix-A-Leak through the skimmer or suction intake. Recirculate for 6-8 hours, then turn off the system. Check water level the following day; if it remains steady, the leak is likely sealed. Wait 48 hours before resuming operation. Do not use the spa until the leak is fully addressed. Cold Weather Leaks: Avoid draining in freezing weather. Filter out Fix-A-Leak with your cartridge filter, rinse the filter, and repeat to remove residue. This approach can sustain a 4-6 month seal during winter, with potential reapplication in warmer weather. Important Notes: Fix-A-Leak can seal holes up to 1/8" in diameter. Pressure is needed for effective impact on the leak area. Leaks caused by pipe cracks may be sealed, but manual repair may be needed due
