ProfitSpring | B2B PPC Agency

Carrier ACA-TOUCH Touchless Request to Exit Button - Standard

Carrier ACA-TOUCH Touchless Request to Exit Button - StandardThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or RED when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless designAdjustable distance 3-15 cmAdjustable relay activation periodRed and Green LED indication for standby and activeIndoor use only

GBP 53.84

1

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - Slim

Carrier ACA-TOUCH-SLIM Touchless Request to Exit Button - SlimThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or RED when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless designAdjustable distance 3 to 15 cmAdjustable relay activation periodRed and Green LED indication for standby and active

GBP 53.84

1

Carrier D-92FC MCP Anti-Tamper Transparent Protection Cover for DI-9204E amp DC-9204E

Carrier D-92FC MCP Anti-Tamper Transparent Protection Cover for DI-9204E DC-9204EThe D-92FC protective flip cover is designed for use with a D series manual call point. It helps to prevent accident trigger operation.Key FeaturesMaterial PMMADimension 87 X 92 X 20 mmThickness 1.7mm

GBP 3.25

1

Carrier ACA001 RTE Request To Exit Button Surface Or Flush Mountable 76x72x32mm

Carrier ACA001 RTE Request To Exit Button Surface Or Flush Mountable 76x72x32mmThe ACA001 is a surface mount request to exit button.Key FeaturesFlush mountedMomentary - pulseEasy to install

GBP 25.19

1

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - Slim

Carrier ACA-STEEL-SLIM Touchless Request to Exit Button - Stainless Steel - SlimThe touchless exit buttons provide means to activate a request-to-exit with access control solutions without having to touch anything. This solution is achieved by using Infrared technology. Just move a hand near the front of the sensor to activate the contact. Activation is clearly indicated by an LED showing Green when active or Blue when powered but not active.Please note that direct sunlight or reflections may affect the sensitivity of the infrared sensor.Key FeaturesTouchless exit button using IR sensorAttractive timeless stainless steel designAdjustable distance 3 to 15 cmAdjustable relay activation periodBlue and Green LED indication for standby and activeIndoor use only

GBP 51.43

1

Carrier MCR300-1T-1S-V2 Gigabit Ethernet to SFP Media Converter

Carrier MCR300-1T-1S-V2 Gigabit Ethernet to SFP Media ConverterThe IFS Gigabit Ethernet to SFP Media Converter is designed for the most demanding extended IP network applications offering the flexibility of SFP technology for Gigabit Ethernet transmission over optical fibre.The IFS MCR300-1T-1S-V2 converts 101001000Base-T Ethernet on copper to 100Base FXLXBX or 1000Base SXBXLXLHXZX optical fibre via Small Form-format Pluggable SFP technology. This media converter can be custom configured to your exact system design specifications by utilizing a variety of IFS SFP Mini-GBIC modules. IFS SFP Mini-GBIC modules are available in a variety of versions from multi-mode or single mode fibre 1 or 2 fibres and wide-temperature versions.The MCR300-1T-1S-V2 provides Auto MDIMDI-X on its TP port and a DIP-switch to configure the Link Fault Pass-through function LFP. The LFP function includes both Link Loss Carry Forward LLCF and Link Loss Return LLR. The LLCFLLR function combination provides efficient TP and optical transmission media monitoring and enables immediate alarm notification to network administrators in the event of a link problem.The MCR300-1T-1S-V2 is designed with a unified enclosure that can be used in a stand-alone installation or can easily be inserted into the IFS MCR-R15 media converter rack. The IFS Media Converter Rack can provide DC power for up to 15 MCR Series Media Converters.Key Features101001000Base-TXAuto-negotiation and Auto-MDIMDI-X9K jumbo frame supported100Base FXLXBX or 1000Base SXBXLXLHXZX SFP optic compatible1 SFP slot provides custom configurationOptical fibre and distance vary by SFP ordered separatelyPlug-n-play installationLED indicators for easy local network diagnosticsDIP-switch for LFP function Enable Disable settingUnified design for stand-alone or rack mount installation MCR-R15 chassis

GBP 68.21

1

Carrier 626-6616 2.5m Power Cable C13 LEC To CEE 74 Schuko Male Right Angle

Carrier 626-6616 2.5m Power Cable C13 LEC To CEE 74 Schuko Male Right AngleA 2.5m Power Cable.Key FeaturesC13LEC to CEE 74Schuko Male Right Angle

GBP 11.35

1

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe Extender

Carrier POE304-EX-4P-V2 POE-BT To Gigabit Ethernet 4-port Poe ExtenderThe IFS POE304-EX-4P-V2 is remotely powered via Ethernet cable from a PoE-bt injecting device eliminating the need for local power requirements. The POE304-EX-4P-V2 can then transmit up to 4-ports of Ethernet data and PoE-afat power dependent on the Powered Devices PD power demand.The IFS PoE-bt solution facilitates easier network planning by eliminating restrictions of edge device placement near AC power outlets and reducing the need for AC wiring and installation costs.Key Features4-Port POE Switch powered by 1 x POE-bt input up to 95WUp to 75 watts shared POE powerPlug-and-play self-powered designCan be used with an IFS PoE-Ultra Injector or other POE-bt compliantPSE equipmentSupports 101001000Base-T EthernetAuto-detect of PoE equipment providing protection from incorrect installationCurrent overload detectionLED Indicators for PoE In PoE Out DataCan be daisy-chained to extend data and PoE on a single network cable a maximum of 300m

GBP 229.66

1

Carrier 5501-M Processor For Moisture Sensor Supports Up To 4 X 5515-g NC Battery Powered

Carrier 5501-M Processor For Moisture Sensor Supports Up To 4 X 5515-g NC Battery PoweredThe 5500 moisture detection series is designed to respond to the presence of water and other non-flammable conductive liquids and to be connected in the closed loop of an alarm system. Two sensors are available 5505 under carpet sensor and 5515 surface mount sensor.Any combination of up to 4 sensors can be used with the 5501 moisture processor.The 5501 moisture processor can be used with any closed loop control dialler or wireless transmitter input circuit. The processor comes with internal lithium batteries that have an anticipated life time of 10 to 15 years. The processor offers flexibility in mounting with no need for an external power source and minimal wiring required.Key FeaturesDetects presence of water and non-flammable conductive liquidsNo external power requiredSensor circuit totally isolated by optical couplingsUp to 4 sensors per 5501 moisture processor

GBP 64.02

1

Carrier DC301 Money Trap Contact To Detect Removal Of Last Bank Note Self-adhesive CO Contact Black Ungraded

Carrier DC301 Money Trap Contact To Detect Removal Of Last Bank Note Self-adhesive CO Contact Black UngradedThe DC301 bill trap has been specifically designed for use inside cash drawers. Bills are inserted between the lever and the base plate. Once the bills are removed contact is made creating an alarm condition.High QualityThe unit is constructed of Delrin plastic for long life and features an SPDT reed switch for activation. The reed is secured using exclusive polyurethane potting material. Since the unit has no mechanical switch it is not susceptible to dust or humidity and not subject to wear.The device mounts easily using double-sided tape.Key FeaturesCompact housing for easy installation in cash drawersDelrin plastic housing for long lifeReed based switch design - no mechanical switch to wear outNot susceptible to dust humidity or wearDouble-sided tape for easy mounting

GBP 67.50

1

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply A

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply AThe 9-30855-65 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signaling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.

GBP 692.98

1

Carrier ESP-300 Ethernet Surge Protector 101001000Mbps

Carrier ESP-300 Ethernet Surge Protector 101001000MbpsThe IFS Ethernet Surge Protector is the ideal solution to protect valuable Ethernet equipment from potentially damaging electrical surges or lightning strikes. The surge protector provides up to 20KA protection on Ethernet cable runs including support for Power Over Ethernet PoE applications. The module offers easy plug-and-play installation by providing two passive 101001000Base-T interfaces for connection between two Ethernet devices and one ground screw for grounding the device to earth-ground. The unit is designed with one unprotected port and one protected port to help prevent entry of electrical surges through outdoor Ethernet cable runs.Key Features20KA lightning surge protectionTwo passive 101001000 Ethernet PortsSupports PoE-ataf pass-throughOne ground position

GBP 33.96

1

Carrier VRS122000EBA 100-253VAC Input 12VDC - 2A Module Power Supply EU Plug - UK Adaptable

Carrier VRS122000EBA 100-253VAC Input 12VDC - 2A Module Power Supply EU Plug - UK AdaptableThe VRS122000EBA power supply is designed to supply low voltage power. These power supplies accept universal mains input voltages from 100 to 253 VAC and provide a regulated 12 VDC output with a maximum load of 2 A.This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application.This unit must be fed from a mains power source having a separate approved disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.Secure PSU case in position using cable ties or other suitable fastening to prevent movement.Key FeaturesEfficient Switch Mode OperationUniversal mains input voltage 100 to 253 VACFully regulated 12 VDC output 2 AOverload Short Circuit ProtectionClass II Double InsulatedCE compliant

GBP 28.93

1

Carrier 1044TW-N Industrial Surface Mount Magnetic Contact

Carrier 1044TW-N Industrial Surface Mount Magnetic ContactThe 1045T series features a wider make distance which permits faster installation accommodates greater misalignment and works better on steel without time-consuming brackets. A wider break distance helps prevent false alarms caused by loose fitting doors. Sentrol-specified contacts keep the 1045 series from sticking or freezing on seldom-used doors.Key FeaturesDesigned for commercial and industrial applicationsCan be used on steel without bracketsRugged constructionMounting screwsConcealed terminals resist tampering and inadvertent shorting

GBP 17.93

1

Carrier NS3553-4P-1T-2S-V2 4-Port Gigabit PoE-bt Industrial Managed Switch

Carrier NS3553-4P-1T-2S-V2 4-Port Gigabit PoE-bt Industrial Managed SwitchFor fast and efficient connectivity from the network edge to a backbone switch or server the IFS 4-Port Gigabit Ethernet Managed Switch by Interlogix features four Gigabit Ethernet ports with support for PoE-bt up to 95W plus 2 SFP ports and a gigabit RJ45 uplink port. Both 100Base-X or 1000Base-X transmission is supported through four GBIC interfaces.For efficient switch management the Switch is easily programmable via a simple yet powerful Web Interface.This switch is designed with a high-performance non-blocking switch fabric and provides wire-speed throughput as high as 14 Gbps. The Switch classifies and prioritizes Layer 2 802.1p or Layer 3 IP TOSDSCP traffic into four hardware queues that support strict or Weighted Round Robin WRR queuing algorithms. This functionality provides maximum allocation of limited network resources and guarantees best performance for real-time applications.This Gigabit PoE-bt Managed Switch provides optimized deployment and safe power management to PoE edge devices such as IP Surveillance cameras access control panels and remote thin clients.The Switch can be configured to monitor a connected PD Powered Device status in real-time via IP ping. If a PD IP Camera or IP Access Reader no longer responds to a ping the switch will cycle PoE power on the port thus rebooting the PD back to operational status. This along with built-in cable diagnostics and support for SNMP can greatly enhance the IT administrators trouble-shooting and management abilities.Key Features4-Port 101001000Base-T RJ-45 with IEEE 802.3afat bt PoE up to 95W1-Port 101001000Base-T RJ-45 uplink2-Port 1001000Base-X mini-GBICSFP slots SFP type auto detection with digital diagnostics monitoring DDM functions.1 x RS-232 console interface for basic management and setupWeb-based telnet SSH SSL and console command line management IP address security management to prevent unauthorized intruderRADIUS TACACS users access authenticationPrevents packet loss with back pressure half-duplex and IEEE 802.3x pause-frame flow control full-duplex groups out of 4K VLAN IDsIP-Based Access Control List ACL MAC-Based Access Control List Source MAC IP address bindingIngressegress bandwidth control on each portSupports IGMP Snooping v1 v2 and v3 IGMP query mode for multicast media application and Multicast VLAN RegistrationPort mirroring to monitor the incoming or outgoing traffic on a particular portSupports LLDP to allow switch to advise its identification and capability on the LANIPv4 and IPv6 IP Address NTP DNS managementCable Diagnostic technology provides the mechanism to detect and report potential cabling issues

GBP 790.60

1

Carrier FE581 Door Holder - Steel Square Base - IP65 - VdS Magnet

Carrier FE581 Door Holder - Steel Square Base - IP65 - VdS MagnetThe FE581 is an IP65 rated VdS approved door holder in a steel square base.The FE500 series door holding magnets are the result of years of specialised development. Rated just 1.5 W 24VDC these powerful magnets pack a holding power of 490 N. All magnets have a spring-loaded pin to ensure ejection against remnant magnetism.For practical ease of installation all units are complete with electrical termination. Protection diodes prevent electromagnetic pulses and reverse polarity protection speeds up installation. The boxes are predrilled in a practical standard format for rapid mounting.Key FeaturesWall mountLow power - 1.5 W490 N holding power on VDS coils100 duty cycleAnti-remnant ejectorProtection diode and reverse polarity protectionVdS Approved

GBP 75.41

1

Carrier ATS1197 Smart Card Reader With Keypad Supplied With 2m Cable

Carrier ATS1197 Smart Card Reader With Keypad Supplied With 2m CableThe ATS smart card readers connect directly on the RS485 data bus of the control panel or 4 Door Controller and may be configured and addressed via a LCD keypad. Some security options Site code 4-byte security code are only programmable via TITAN and configuration cards. Mainly used for outdoor applications in high security sites where needs to be used a combination of a card and PIN for access.Security FeaturesThe ATS smart card technology has the ability to programme a unique 4 billion 4-byte combination security code. This allows the memory card to unlockopendisarm based on three keys the card number the Site code and the 4-byte security code. Once a 4-byte security code has been created downloaded to the programmer and the cards it is not possible to read the memory on the card or even recognise the card memory at any other reader or TITAN and programmer combination. Communications between TITAN and the programmer may also be password protected to prevent the 4-byte security code from being uploaded from the programmer into another PC running TITAN.Key FeaturesFull epoxy filled weather proof constructionKeypadSpecified cable - Aritech WCAT 5254 or equivalentCompatible with Axon and Advisor Advanced panels

GBP 269.50

1

Carrier 1074D-N Flanged Recessed Mount Contact With 2 Mounting Screws 13mm Gap DPDT White

Carrier 1074D-N Flanged Recessed Mount Contact With 2 Mounting Screws 13mm Gap DPDT WhiteThe Sentrol 1072 series recessed contacts are designed for applications where the added integrity of mounting screws is needed. The units work well in both wood and metal frame doors and windows.Easy InstallationThe two mounting holes provide additional strength to prevent the contact and magnet from becoming dislodged due to environmental changes. This can occur when the door or window frames become warped and misaligned from moisture or the settling of a building.Durability and dependabilityThe Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life. Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.High quality components and materialsReed legs are plated with rhodium or ruthenium and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion.Key FeaturesFlange mounting for positive mounting oversized holesAttractive added security of recessed installationMounting screws included

GBP 30.46

1

Carrier 3633-0053 Magicard - Enduro Cleaning Kit 10 Cards 1 Pen

Carrier 3633-0053 Magicard - Enduro Cleaning Kit 10 Cards 1 PenSecure high-quality print outputs and extend the lifespan of your Magicard printers with routine use of the Magicard 3633-0053 printer cleaning kit. For best results follow the recommended frequency of usage for optimum performance of your Magicard printers.Key FeaturesIncludes 10 cleaning cards and one cleaning penManufacturer recommends the use of cleaning kit on every ribbon replacementUse genuine Magicard Printer Cleaning Kits only for guaranteed results

GBP 49.68

1

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power Supply

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power SupplyThe 9-30852-38 is a fully featured 24V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signalling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.The power supply is supplied in a self-contained wall mounting box that can also house 38 Ah batteries not included. Selection of the battery size is easy with the use of a jumper. Similarly a jumper is used to select between dual-path or two individual outputs.With this feature mission critical applications can be powered ensuring redundancy in the supply of 24 V to the load.On the front of the unit 6 LEDs indicated the status of the power supply. To aid with the interpretation of the meaning of the LEDs a legend is used on the front of the unit. Additionally there is also a diagnostics LED that with different flash patterns indicated even more detailed information.A potential-free contact is used to signal faults due to output failure battery fault charger fault or internal fault. A second potential-free contact signals the loss of mains power.Key FeaturesProviding deep discharge protectionIntelligent battery charging monitoring and signallingDiagnostics LEDs on front of housingExternal housing for 38Ah batteriesDual load connection terminals2x Relay outputs

GBP 499.93

1

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power Supply

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power SupplyThe 9-30855-18 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signaling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.On the front of the unit diagnostic LEDs indicate the status of the power supply with various flash patterns to ensure accurate diagnostics when the unit is in fault.The range is available in different size of output currents with support for various sizes of batteries.Installer friendlyThe power supply is supplied in a self-contained wall mounting box that can also house 18 Ah batteries not included.Selection of the battery size is easy with the use of a jumper. Similarly a jumper is used to select between dual-path or two individual outputs. With this feature mission critical applications can be powered ensuring redundancy in the supply of 24 V to the load.On the front of the unit 6 LEDs indicated the status of the power supply. To aid with the interpretation of the meaning of the LEDs a legend is used on the front of the unit. Additionally there is also a diagnostics LED that with different flash patterns indicated even more detailed information.A potential-free contact is used to signal faults due to output failure battery fault charger fault or internal fault. A second potential-free contact signals the loss of mains power.EN 54-4 approved 24 V 5 A 0.7 A intelligent power supplyApproved to EN54-4 VdS certifiedSelf contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDetailsApproved to EN54-4 VdS certifiedSelf contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDual load connection terminalsWide input voltage range

GBP 357.18

1

Carrier ABT-P10 Sound Projector Speaker - 10W - 100V

Carrier ABT-P10 Sound Projector Speaker - 10W - 100VFire alarm ABT-P10 ABT-P10P loudspeakers have been designed and manufactured for the most demanding customers as well as to meet the requirements of the most complex and sophisticated sound transmitting applications. Thanks to the contribution of advanced technologies they combine excellent acoustic parameters and high aesthetics with resistance to mechanical damages and varying weather conditions as well as low prices. Their additional quality is an exceptionally quick and simple installation.Quality standards and audio characteristics have been confirmed through tests and trials in an anechoic chamber resistance and integrity testing equipment as well as chambers for resistance to weather and air humidity testing. The need to maintain the best acoustic parameters was the idea underlying the design process.ABT-P loudspeaker models emitting the sound which features directional characteristic and high efficiency. 5-inch 2-cone wide band loudspeakers used in these series are excellent alternative solution for horn-type units due to wide frequency band. They prove excellent in both musical and verbal applications. ABT-P10 and ABT-P10P loudspeakers are enclosed in round casings made of resistant and durable ABS they feature a high class of protection from humidity. Thanks to directional characteristic of sound propagation our loudspeakers are mostly applied on circulation routes and in wide area sound emission. Due to resistance to weather conditions the loud speakers prove excellent in industrial halls warehouses as well as partly open spaces exposed to outdoor weather conditions.Apart from high mechanical and functional resistance ABT-P loudspeakers entirely comply with global requirements for systems including also the British Standard No. BS5839 Part 8 and EN 54-24.All ABT-P loudspeakers have built-in a ceramic connection block and a thermal fuse. Two sound-transmission cable penetrations in the casing are insulated by means of two cable glands. Inside the fire zone the loudspeaker is isolated from the entire line which ensures line continuity and uninterrupted broadcasting of emergency messages. The individual power rating is selected by means of connection with applicable transformer branch.ABT-P loudspeakers are designed for continuous operations at rated parameters for at least 100 hours in compliance with the IEC-268-5 Standards.

GBP 54.13

1

Carrier EST-P10 Sound Projector - 10W 100V

Carrier EST-P10 Sound Projector - 10W 100VFire alarm EST-P10 EST-P10P loudspeakershave been designed and manufactured forthe most demanding customers as well asto meet the requirements of the most complex and sophisticated sound transmittingapplications. Thanks to the contribution ofadvanced technologies they combine excellent acoustic parameters and high aesthetics with resistance to mechanical damagesand varying weather conditions as well as lowprices. Their additional quality is an exceptionally quick and simpleinstallation.Quality standards and audio characteristics have been confirmed through tests andtrials in an anechoic chamber resistanceand integrity testing equipment as well aschambers for resistance to weather andair humidity testing. The need to maintainthe best acoustic parameters was the ideaunderlying the design process.EST-P loudspeaker models emitting thesound which features directional characteristic and high efficiency. 5-inch 2-cone wideband loudspeakers used in these series areexcellent alternative solution for horn-typeunits due to wide frequency band. Theyprove excellent in both musical and verbalapplications. EST-P10 and EST-P10P loudspeakers are enclosed in round casingsmade of resistant and durable ABS they feature a high class of protection from humidity.Thanks to directional characteristic of soundpropagation our loudspeakers are mostlyapplied on circulation routes and in widearea sound emission. Due to resistance toweather conditions the loudspeakers proveexcellent in industrial halls warehousesaswell as partly open spaces exposed tooutdoor weather conditions.Apart from high mechanical and functionalresistance EST-P loudspeakers entirelycomply with global requirements for systems including also the British Standard No.BS5839 Part8 and EN 54-24.All EST-P loudspeakers have built-in a ceramicconnection block and a thermal fuse. Twosound-transmission cable penetrations in thecasing are insulated by means of two cableglands. Inside the fire zone the loudspeakeris isolated from the entire line which ensuresline continuity and uninterrupted broadcasting of emergency messages. Theindividualpower rating is selected by means of connection with applicable transformer branch.EST-P loudspeakers are designed for continuous operations at rated parameters for at least 100 hours in compliance with the IEC-268-5 Standard.

GBP 58.74

1

Carrier EST-P10P Sound Projector - 10W 100V - Pending

Carrier EST-P10P Sound Projector - 10W 100V - PendingFire alarm EST-P10 EST-P10P loudspeakershave been designed and manufactured forthe most demanding customers as well asto meet the requirements of the most complex and sophisticated sound transmittingapplications. Thanks to the contribution ofadvanced technologies they combine excellent acoustic parameters and high aesthetics with resistance to mechanical damagesand varying weather conditions as well as lowprices. Their additional quality is an exceptionally quick and simpleinstallation.Quality standards and audio characteristics have been confirmed through tests andtrials in an anechoic chamber resistanceand integrity testing equipment as well aschambers for resistance to weather andair humidity testing. The need to maintainthe best acoustic parameters was the ideaunderlying the design process.EST-P loudspeaker models emitting thesound which features directional characteristic and high efficiency. 5-inch 2-cone wideband loudspeakers used in these series areexcellent alternative solution for horn-typeunits due to wide frequency band. Theyprove excellent in both musical and verbalapplications. EST-P10 and EST-P10P loudspeakers are enclosed in round casingsmade of resistant and durable ABS they feature a high class of protection from humidity.Thanks to directional characteristic of soundpropagation our loudspeakers are mostlyapplied on circulation routes and in widearea sound emission. Due to resistance toweather conditions the loudspeakers proveexcellent in industrial halls warehousesaswell as partly open spaces exposed tooutdoor weather conditions.Apart from high mechanical and functionalresistance EST-P loudspeakers entirelycomply with global requirements for systems including also the British Standard No.BS5839 Part8 and EN 54-24.All EST-P loudspeakers have built-in a ceramicconnection block and a thermal fuse. Twosound-transmission cable penetrations in thecasing are insulated by means of two cableglands. Inside the fire zone the loudspeakeris isolated from the entire line which ensuresline continuity and uninterrupted broadcasting of emergency messages. Theindividualpower rating is selected by means of connection with applicable transformer branch.EST-P10P loudspeakers are designed for pendant mounting. They are equipped with an additional junction box enabling simple and quick speaker installation. They are used wherever the distance from ceiling mounted speaker is too large.

GBP 71.75

1

Carrier ABT-P10P Sound Projector Speaker - 10W - 100V Pendant

Carrier ABT-P10P Sound Projector Speaker - 10W - 100V PendantFire alarm ABT-P10P loudspeakers have been designed and manufactured for the most demanding customers as well as to meet the requirements of the most complex and sophisticated sound transmitting applications.Thanks to the contribution of advanced technologies they combine excellent acoustic parameters and high aesthetics with resistance to mechanical damages and varying weather conditions as well as low prices. Their additional quality is an exceptionally quick and simple installation. Quality standards and audio characteristics have been confirmed through tests and trials in an anechoic chamber resistance and integrity testing equipment as well as chambers for resistance to weather and air humidity testing. The need to maintain the best acoustic parameters was the idea underlying the design process. ABT-P loudspeaker models emitting the sound which features directional characteristic and high efficiency. 5-inch 2-cone wide band loudspeakers used in these series are excellent alternative solution for horn-type units due to wide frequency band. They prove excellent in both musical and verbal applications.ABT-P10P loudspeakers are enclosed in round casings made of resistant and durable ABS they feature a high class of protection from humidity. Thanks to directional characteristic of sound propagation our loudspeakers are mostly applied on circulation routes and in wide area sound emission. Due to resistance to weather conditions the loudspeakers prove excellent in industrial halls warehouses as well as partly open spaces exposed to outdoor weather conditions. Apart from high mechanical and functional resistance ABT-P loudspeakers entirely comply with global requirements for systems including also the British Standard No. BS5839 Part 8 and EN 54-24.All ABT-P loudspeakers have built-in a ceramic connection block and a thermal fuse. Two sound-transmission cable penetrations in the casing are insulated by means of two cable glands. Inside the fire zone the loudspeaker is isolated from the entire line which ensures line continuity and uninterrupted broadcasting of emergency messages. The individual power rating is selected by means of connection with applicable transformer branch.ABT-P10P loudspeakers are designed for pendant mounting. They are equipped with an additional junction box enabling simple and quick speaker installation. They are used wherever the distance from ceiling mounted speaker is too large.Key FeaturesComplies with EN 54-24Complies with BS5839-8 standardsIdeal for ceiling or wall installationDurable casing with ceramic block and thermal fuseHigh sound quality

GBP 66.13

1

Brand

Merchant

Price (EUR)