ProfitSpring | B2B PPC Agency

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type A

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type AABT-NSM is measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable.The ABT-NSM is available in two housings. Lightweight for indoor applications.Key FeaturesOperates under extreme temperatures2 wire analogue connection up to 300 meters from ABT-NSC6Dimensions 200 x 110 mm

GBP 99.44

1

Carrier 5709C-W Acoustic Glassbreak Tester For Testing Acoustic Glassbreak Sensors

Carrier 5709C-W Acoustic Glassbreak Tester For Testing Acoustic Glassbreak SensorsThe 5709C-W is a handheld acoustic glass break tester with real glass break sounds. The tester has different settings depending on what kind of glass you want to protect. In this way you will test the effective range.Key FeaturesReal glass break soundsDifferent settings for tempered plated and laminated glass

GBP 126.00

1

Carrier P-9960A CAN Network Card for GST200-2 Class A

Carrier P-9960A CAN Network Card for GST200-2 Class AThe P-9960A is an optional card for GST200 series control panels providing two photoelectric isolation CAN interfacesKey FeaturesTwo photoelectric isolation CAN interfacesSuitable for ring network

GBP 242.04

1

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply A

Carrier 9-30855-65 EN 54-4 approved 24 V 3 A 2.6 A Intelligent Power Supply AThe 9-30855-65 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signaling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.

GBP 692.98

1

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power Supply

Kidde Airsense 9-30855-38 EN 54-4 Approved 24 V 4 A 1.5 A Intelligent Power SupplyThe 9-30852-38 is a fully featured 24V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signalling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.The power supply is supplied in a self-contained wall mounting box that can also house 38 Ah batteries not included. Selection of the battery size is easy with the use of a jumper. Similarly a jumper is used to select between dual-path or two individual outputs.With this feature mission critical applications can be powered ensuring redundancy in the supply of 24 V to the load.On the front of the unit 6 LEDs indicated the status of the power supply. To aid with the interpretation of the meaning of the LEDs a legend is used on the front of the unit. Additionally there is also a diagnostics LED that with different flash patterns indicated even more detailed information.A potential-free contact is used to signal faults due to output failure battery fault charger fault or internal fault. A second potential-free contact signals the loss of mains power.Key FeaturesProviding deep discharge protectionIntelligent battery charging monitoring and signallingDiagnostics LEDs on front of housingExternal housing for 38Ah batteriesDual load connection terminals2x Relay outputs

GBP 499.93

1

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power Supply

Carrier 9-30855-18 EN 54-4 approved 24 V 5 A 0.7 A Intelligent Power SupplyThe 9-30855-18 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signaling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.On the front of the unit diagnostic LEDs indicate the status of the power supply with various flash patterns to ensure accurate diagnostics when the unit is in fault.The range is available in different size of output currents with support for various sizes of batteries.Installer friendlyThe power supply is supplied in a self-contained wall mounting box that can also house 18 Ah batteries not included.Selection of the battery size is easy with the use of a jumper. Similarly a jumper is used to select between dual-path or two individual outputs. With this feature mission critical applications can be powered ensuring redundancy in the supply of 24 V to the load.On the front of the unit 6 LEDs indicated the status of the power supply. To aid with the interpretation of the meaning of the LEDs a legend is used on the front of the unit. Additionally there is also a diagnostics LED that with different flash patterns indicated even more detailed information.A potential-free contact is used to signal faults due to output failure battery fault charger fault or internal fault. A second potential-free contact signals the loss of mains power.EN 54-4 approved 24 V 5 A 0.7 A intelligent power supplyApproved to EN54-4 VdS certifiedSelf contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDetailsApproved to EN54-4 VdS certifiedSelf contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDual load connection terminalsWide input voltage range

GBP 357.18

1

Carrier Q9033A DT Mounting Arm for Q9033 for use with DT Series Flame Detectors

Carrier Q9033A DT Mounting Arm for Q9033 for use with DT Series Flame DetectorsThe Q9033A Mounting Arm is an approved accessory for installation of X-Series flame detectors. It allows easy pan and tilt adjustments for sighting of the detector.In a typical installation the detector is pointed down.When a detector is pointed down panning to either side of centre results in some degree of rotation the greater the pan amount the greater the rotation.Since the cone of vision of the X3301X3302 is not round but truncated on the upper half rotation results in an unbalanced field of view. The Collar Attachment enables the detector to be adjusted level to the horizon thereby ensuring a balanced field of view.Key FeaturesCompatible with all X-Series flame detectorsFM and DNV performance approved for use with X-Series detectorsAllows easy detector sightingHeavy duty Aluminium or Stainless-Steel constructionVibration and resonant frequency resistant

GBP 725.63

1

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable Entry

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable EntryThe C-94DB is a deep surface mounting sounder backbox for use with a range of addressable and conventional sounders and beacons.The C-94DB is suitable for use with the following productsI-9403 Intelligent Sounder BeaconI-9404 Intelligent SounderC-9403 Conventional Sounder BeaconC-9404 Conventional Sounder

GBP 9.14

1

Carrier CB-108A Main Board for GST116A amp 108A

Carrier CB-108A Main Board for GST116A 108AThe CB-108A is a Main Board for the GST116A 108A.

GBP 289.49

1

Carrier EST_FlyCase Demo Set For EST Compact

Carrier EST_FlyCase Demo Set For EST CompactThis demo set is only dedicated for demo purposes training presentation. It must not be used for projects. No certification covers this equipment for real purposes.This Demo equipment includes a full set of mounted devices into a single RackEST-VES-4002-LNRHandle_Flycase

GBP 5164.81

1

Carrier KY-220 Panel Door Key K22 for GST200N

Carrier KY-220 Panel Door Key K22 for GST200NThe KY-220 is a spare or replacement panel door key designed for use with the GST200N control panel.

GBP 2.16

1

Carrier TBC100 Replacement Battery Charger for use with Fire Test Kits

Carrier TBC100 Replacement Battery Charger for use with Fire Test KitsThe TBC100 is a replacement battery charger for use with fire test kits.

GBP 200.16

1

Carrier P-9940A RS485 Network Card for GST200 amp GST200-2 for GST Control Panels

Carrier P-9940A RS485 Network Card for GST200 GST200-2 for GST Control PanelsThe P-9940A is an optional card for GST200 series control panels providing two photoelectric isolation RS485 interfaces.Key FeaturesTwo photoelectric isolation RS485 interfacesSuitable for ring network

GBP 166.20

1

Carrier S25-1MLC-A-2 SFP-Port 100Base-FX Mini Module - 1 Fibre - 2Km - Multi-Mode 1300nm A End -4075

Carrier S25-1MLC-A-2 SFP-Port 100Base-FX Mini Module - 1 Fibre - 2Km - Multi-Mode 1300nm A End -4075The Carrier Fire Security transceiver module is specifically designed to accommodate high-performance optical fibre including integrated duplex data link over single mode. Compliant with the SFP Multisource Agreement MSA these transceiver modules feature hot-plug capability for easy installation without interrupting host equipment operating online. The SFP transceiver can install into Carrier Fire Security switch products with an 100Base-FX interface.Key FeaturesSFP multi-source agreement compliantMax data rate 155 MbitssClass 1 laser safety standard IEC 60825 compliant1 fiber multimodeLC connectorLow power dissipationPlug-and-play capability for easy installationHot Pluggable-40C to 75C operation temperatureTTL signal detect indicatorSingle power supply 3.3VComply with the IEEE 802.3ab

GBP 97.73

1

Carrier TVD-PPB TruVision Dome Pendant Ceiling Mount Bracket for TVD-CB5 TVD-CB3

Carrier TVD-PPB TruVision Dome Pendant Ceiling Mount Bracket for TVD-CB5 TVD-CB3The TVD-PPB is a pendant ceiling bracket which allows you to mount a variety of domes onto a ceiling. Additionally to its mounting function the bracket provides efficient cable management for the camera used.Key FeaturesPendant ceiling bracketCable managementUnified accessory for range of domesRugged designSuitable for outdoor and indoor use

GBP 35.08

1

Carrier 2706AP-L SurfaceOverhead Mount Contact For High Security Applications

Carrier 2706AP-L SurfaceOverhead Mount Contact For High Security ApplicationsSentrols 2700 Series high security magnetic contacts with triple biased reeds are highly resistant to defeat by external magnet. For added security magnetic field tamper and pry tamper are standard features. Each 2700 contact and actuation magnet set is factory compensated for the effects of steel.ApplicationsThe 2700 Series are designed for protecting high-security facilities such as airports warehouses manufacturing plants banks and military bases.Durability and dependabilityThe Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life.Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.High quality components and materialsReed legs are plated with rhodium or ruthenium and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion.Key FeaturesTriple-biased reeds make defeat of the switch with an external magnet virtually impossibleMagnetic field tamper for added securityFactory compensated for effects of steel

GBP 234.68

1

Carrier CDC4-EN-MBC 4-8 Door Controller Spare PCB For Advisor Advanced - EN Approved

Carrier CDC4-EN-MBC 4-8 Door Controller Spare PCB For Advisor Advanced - EN ApprovedThe CDC4-EN-MBC is a spare PCB designed for use with the CDC4-EN 4-8 Door Controller for Advisor Advanced.

GBP 952.27

1

Carrier B-9310 Surface Mount Back Box for Interface Modules

Carrier B-9310 Surface Mount Back Box for Interface ModulesThe B-9310 is a surface mounting backbox for use with the following range of interface modules.Compatible withC-9302 AC Control Interposing Relay ModuleC-9503E Short Circuit Loop IsolatorI-9300 Intelligent Addressable Single Input ModuleI-9301 Intelligent Addressable Single IO Interface ModuleI-9319 Intelligent Addressable Zone Monitor Module

GBP 3.35

1

Carrier W72321 Low Profile Wall Bracket LPB2 For PQ And DT Series

Carrier W72321 Low Profile Wall Bracket LPB2 For PQ And DT SeriesThe W72321 is a wall-mounted bracket that allows for easier adjustment of the detectors angle.Key FeaturesBracket mountable on the wallEasy adjustment of the detector angleCan be used with Guardall DT PQ Platform DTX detectors

GBP 7.43

1

Carrier GST852RP LocalPassive LCD Repeater Panel for GST100 GST200 GST200-2 GST5000

Carrier GST852RP LocalPassive LCD Repeater Panel for GST100 GST200 GST200-2 GST5000The GST852RP is a local passive LCD repeater panel for use with the GST100 GST200 GST200-2 GST5000W GST5000F GST5000 GST-IFP8.In case of fire the repeater panel will display the fire type time and location details together with sound for local notification. This addressable repeater is possible to be connected with GST addressable panels through RS485 links.Key FeaturesBig size LCD display with back-litCompatible with all GST intelligent panelsMute and lamp testElectrically addressing

GBP 340.79

1

Carrier DP-9907 Active EOL Unit for DC Series Devices

Carrier DP-9907 Active EOL Unit for DC Series DevicesMatching with conventional fire alarm control panel or addressable zone monitor unit DP-9907 Active End of Line Unit AEOL takes place of the traditional end-of-line resister EOLR. It resolves such problems that in traditional EOLR connection when a detector is removed from the base all devices after it will not be operational.Key FeaturesCan be used as a detector base to save installation costCan be used alone with a coverBuild a reliable conventional zone connection

GBP 7.68

1

Carrier D-92FC MCP Anti-Tamper Transparent Protection Cover for DI-9204E amp DC-9204E

Carrier D-92FC MCP Anti-Tamper Transparent Protection Cover for DI-9204E DC-9204EThe D-92FC protective flip cover is designed for use with a D series manual call point. It helps to prevent accident trigger operation.Key FeaturesMaterial PMMADimension 87 X 92 X 20 mmThickness 1.7mm

GBP 3.25

1

Carrier P-9930 RS232 Comms Board for GST200 amp GST200-2

Carrier P-9930 RS232 Comms Board for GST200 GST200-2The P-9930 RS232 card is an optional card for GST200 series control panels providing two photoelectric isolation RS232 interfaces for connecting with GST Graphic Monitor Centre and GST Defining Tool.This card shouldnt be inserted and removed when it is energized.When entering calibration mode pressing SK1 key reset main board it will display Colour CRT OK if registration is successful.Key FeaturesStandard RS232 and USB interfacesConnecting GST Graphic Centre and GST Defining Tool

GBP 98.21

1

Carrier UVP-C180 100-180 cm Adjustable Ceiling Mount for UltraView PTZ Dome - Cable Management

Carrier UVP-C180 100-180 cm Adjustable Ceiling Mount for UltraView PTZ Dome - Cable ManagementThe UVP-C180 is a ceiling mount bracket for all pendant UltraView PTZ cameras UVP. Its adjustable length allows you to fit the camera as required for specific applications. The brackets cable management function allows for an efficient and aesthetically pleasing installation.Key FeaturesCeiling mountFits all UVP camerasAdjustable lengthCable management100-180 cm length

GBP 255.17

1

Carrier UVP-C60 60cm Ceiling Mount for UltraView PTZ Dome - Cable Management - 32 mm

Carrier UVP-C60 60cm Ceiling Mount for UltraView PTZ Dome - Cable Management - 32 mmThe UVP-C60 is a ceiling mount bracket for all TruVision and UltraView PTZ cameras. It allows you to pendant mount PTZ cameras at 60 cm from the ceiling.The brackets cable management function allows for an efficient and aesthetically pleasing installation.Key FeaturesCeiling mountFits all TruVision PTZ camerasCable management60 cm length32mm diameter

GBP 110.20

1

Brand

Merchant

Price (EUR)