ProfitSpring | B2B PPC Agency

Cooper Menvier EF-FMT Fire Microphone with Touchscreen

Cooper Menvier EF-FMT Fire Microphone with TouchscreenThe EF-FMT is a Firefighters Microphone with configurable 7 Touchscreen. It has been designed for use with the DAU500 system.Key FeaturesFirefighters microphoneDesktop or wall mountedWall-brackets includedHandheld microphone with ALL-CALL buttonCurl cord working length 1.10mSupervised for faultConfigurable 7 touchscreen for paging control and status informationEN54-16 approved

GBP 1811.29

1

Cooper EF-CMP 6 Zone Touchscreen Console with Gooseneck

Cooper EF-CMP 6 Zone Touchscreen Console with GooseneckThe EF-CMP is a desktop non-emergency paging microphone.Key Features6 zone selectable buttons plus a PTT push-to-talk button30 cm gooseneck with dynamic hyper-cardioid microphoneAddressable 0-255Redundant L-NET link 2 x RJ452 x RJ45 for ring spur or daisy-chain interfacing with DAU500

GBP 776.27

1

Cooper Menvier EF-CMT 7 Inch Touchscreen Console with Gooseneck

Cooper Menvier EF-CMT 7 Inch Touchscreen Console with GooseneckThe EF-CMT is a 7-inch touchscreen console with 30cm gooseneck and a dynamic hyper-cardioid microphone.Key FeaturesDesktop non-emergency paging microphone with touchscreenAddressable 0-2552 x RJ45 for ring spur or daisy-chain interfacing with DAU500Configurable 7 touchscreen for paging control and status information30 cm gooseneck with dynamic hyper-cardioid microphoneRedundant L-NET link 2 x RJ45

GBP 1380.01

1

Cooper Menvier EF-FMTC Fire Microphone with Touchscreen and Gooseneck

Cooper Menvier EF-FMTC Fire Microphone with Touchscreen and GooseneckThe desktopwall mounted microphone station EF-FMTC with touchscreen panel has been designed for use with the DAU500 voice alarm system. It can address up to 255 zones and trigger every source or message available in the entire system. It features gooseneck microphone for general paging and a separate fully monitored fireman microphone.The EF-FMTC desktop microphone offers dual mode operation paging mode firemans door closed where only general messages and paging features are available emergency mode firemans door open where emergency messages and firemans microphone is available.The microphone is connected to L-Net interface of DAU500 panel and may be daisy-chained with more L-Net devices. It is dedicated for call points where both general-purpose paging and emergency evacuation management is necessary. Fault monitoring and EVAC functionality are included making it suitable as an emergency microphone.Key FeaturesTable-top or wall mounted wall brackets includedHandheld firemens microphone with ALL-CALL buttonEquipped with EN54-16 mandatory indicatorsCoiled cord working length 1.10 mFully monitored fault systemAccess level protection by transparent coverAddressableRedundant L-Net link 2 x RJ452 x RJ45 for ring spur or daisy-chain interfacing with EFDAU500Configurable 7 touchscreen for paging control and status information30 cm gooseneck with dynamic hyper-cardioid microphone

GBP 1919.09

1

Cooper CFEASL4 4 Way Slave Indicator Requires 1 CFEAPULLKIT with PSU

Cooper CFEASL4 4 Way Slave Indicator Requires 1 CFEAPULLKIT with PSUThe Cooper CFEASL4 supports up to four standalone disabled toilets monitorsin one specific area with no need for individual power supplies.

GBP 156.41

1

Cooper Menvier MCD524-DB Conventional Sounder Beacon With Deep Base - Red

Cooper Menvier MCD524-DB Conventional Sounder Beacon With Deep Base - RedThe Menvier MCD524-DB is a combined light and sounder beacon. It has an Ingress Protection rating of IP65 meaning it is weatherproof and has a high performance light source and volume control with 32 selectable tones.Key FeaturesWeatherproof version IP65High output xenon beaconSide entry surface cablesSounder and beacon with a single installation point32 selectable tonesLegacy product

GBP 76.07

1

Cooper Menvier MCD524SB Conventional Sounder Beacon With Shallow Base - Red

Cooper Menvier MCD524SB Conventional Sounder Beacon With Shallow Base - RedThe MCD524SBs low-profile xenon horn has a powerful light source and adjustable volume control. Easy to install due to pre-drilled mounting and cable entry holes.Key FeaturesModest low profile designHigh performance xenon indicator lightPre-drilled cable entriesSounder and indicator light with a single installation point32 selectable soundsCombined audiovisual unitSingle installation pointLegacy product

GBP 69.28

1

Cooper CF30002GNC Intelligent Addressable 2 Loop Control Panel with Network Card

Cooper CF30002GNC Intelligent Addressable 2 Loop Control Panel with Network CardThe Cooper CF3000 is a high specification intelligent addressable control panel which is available in various loop configurations. These panels combine sophisticated functionality with simple operation and an aesthetically pleasing design. The large capacity ability to support complex cause and effect programming and wide range of user controllable functions make the system suitable for a diverse range of projects from sheltered housing to large office developments.The CF3000 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing. It can operate as a stand-alone panel or as part of a networked system. They have powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local.An extensive range of compatible intelligent addressable systems ancillaries are available to work with the CF3000 all of which incorporate an integral short circuit isolator to provide maximum protection against short circuits on the external loop.Key FeaturesAvailable in 1 2 and 4 loop versionsUp to 200 addresses per loopFull network capability up to 126 panelsEvent History Buffer 9999 events with DateTime stampSoft addressingLarge versatile touch screen user interfaceMulti-language selection capabilityIntegral printer optionalIntegral battery and power supplyFlexible cause and effect programmingIncludes batteriesBenefitsSimple to operate end user touch-screen interfaceFlexible distributed network capabilityFull range of compatible accessoriesEasy to design system cause and effect using site installer softwareFull system integrity with Cooper managed protocol

GBP 1984.81

1

Cooper CF30004GNC Intelligent Addressable 4 Loop Control Panel with Network Card

Cooper CF30004GNC Intelligent Addressable 4 Loop Control Panel with Network CardThe Cooper CF3000 is a high specification intelligent addressable control panel which is available in various loop configurations. These panels combine sophisticated functionality with simple operation and an aesthetically pleasing design. The large capacity ability to support complex cause and effect programming and wide range of user controllable functions make the system suitable for a diverse range of projects from sheltered housing to large office developments.The CF3000 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing. It can operate as a stand-alone panel or as part of a networked system. They have powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local. An extensive range of compatible intelligent addressable systems ancillaries are available to work with the CF3000 all of which incorporate an integral short circuit isolator to provide maximum protection against short circuits on the external loop.Key FeaturesAvailable in 1 2 and 4 loop versionsUp to 200 addresses per loopFull network capability up to 126 panelsEvent History Buffer 9999 events with DateTime stampSoft addressingLarge versatile touch screen user interfaceMulti-language selection capabilityIntegral printer optionalIntegral battery and power supplyFlexible cause and effect programmingIncludes batteriesBenefitsSimple to operate end user touch-screen interfaceFlexible distributed network capabilityFull range of compatible accessoriesEasy to design system cause and effect using site installer softwareFull system integrity with Cooper managed protocol

GBP 2791.55

1

Cooper CF30002GP Intelligent Addressable 2 Loop Control Panel with Printer DF60002P FX60002P

Cooper CF30002GP Intelligent Addressable 2 Loop Control Panel with Printer DF60002P FX60002PThe Cooper CF3000 is a high specification intelligent addressable control panel which is available in various loop configurations. These panels combine sophisticated functionality with simple operation and an aesthetically pleasing design. The large capacity ability to support complex cause and effect programming and wide range of user controllable functions make the system suitable for a diverse range of projects from sheltered housing to large office developments.The CF3000 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing. It can operate as a stand-alone panel or as part of a networked system. They have powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local. An extensive range of compatible intelligent addressable systems ancillaries are available to work with the CF3000 all of which incorporate an integral short circuit isolator to provide maximum protection against short circuits on the external loop.Key FeaturesAvailable in 1 2 and 4 loop versionsUp to 200 addresses per loopFull network capability up to 126 panelsEvent History Buffer 9999 events with DateTime stampSoft addressingLarge versatile touch screen user interfaceMulti-language selection capabilityIntegral printer optionalIntegral battery and power supplyFlexible cause and effect programmingIncludes batteriesBenefitsSimple to operate end user touch-screen interfaceFlexible distributed network capabilityFull range of compatible accessoriesEasy to design system cause and effect using site installer softwareFull system integrity with Cooper managed protocol

GBP 1999.91

1

Cooper CF30004GPNC Intelligent Addressable 4 Loop Control Panel with Printer Network Card

Cooper CF30004GPNC Intelligent Addressable 4 Loop Control Panel with Printer Network CardThe Cooper CF3000 is a high specification intelligent addressable control panel which is available in various loop configurations. These panels combine sophisticated functionality with simple operation and an aesthetically pleasing design. The large capacity ability to support complex cause and effect programming and wide range of user controllable functions make the system suitable for a diverse range of projects from sheltered housing to large office developments.The CF3000 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing. It can operate as a stand-alone panel or as part of a networked system. They have powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local.An extensive range of compatible intelligent addressable systems ancillaries are available to work with the CF3000 all of which incorporate an integral short circuit isolator to provide maximum protection against short circuits on the external loop.Key FeaturesAvailable in 1 2 and 4 loop versionsUp to 200 addresses per loopFull network capability up to 126 panelsEvent History Buffer 9999 events with DateTime stampSoft addressingLarge versatile touch screen user interfaceMulti-language selection capabilityIntegral printer optionalIntegral battery and power supplyFlexible cause and effect programmingIncludes batteriesBenefitsSimple to operate end user touch-screen interfaceFlexible distributed network capabilityFull range of compatible accessoriesEasy to design system cause and effect using site installer softwareFull system integrity with Cooper managed protocol

GBP 3019.21

1

Cooper CF30004GP Intelligent Addressable 4 Loop Control Panel with Printer DF60004P FX60004-P

Cooper CF30004GP Intelligent Addressable 4 Loop Control Panel with Printer DF60004P FX60004-PThe Cooper CF3000 is a high specification intelligent addressable control panel which is available in various loop configurations. These panels combine sophisticated functionality with simple operation and an aesthetically pleasing design. The large capacity ability to support complex cause and effect programming and wide range of user controllable functions make the system suitable for a diverse range of projects from sheltered housing to large office developments.The CF3000 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing. It can operate as a stand-alone panel or as part of a networked system. They have powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local. An extensive range of compatible intelligent addressable systems ancillaries are available to work with the CF3000 all of which incorporate an integral short circuit isolator to provide maximum protection against short circuits on the external loop.Key FeaturesAvailable in 1 2 and 4 loop versionsUp to 200 addresses per loopFull network capability up to 126 panelsEvent History Buffer 9999 events with DateTime stampSoft addressingLarge versatile touch screen user interfaceMulti-language selection capabilityIntegral printer optionalIntegral battery and power supplyFlexible cause and effect programmingIncludes batteriesBenefitsSimple to operate end user touch-screen interfaceFlexible distributed network capabilityFull range of compatible accessoriesEasy to design system cause and effect using site installer softwareFull system integrity with Cooper managed protocol

GBP 2327.69

1

Cooper CIOP4 4 Way Mimic Relay Board with 4 Inputs amp 4 Outputs

Cooper CIOP4 4 Way Mimic Relay Board with 4 Inputs 4 OutputsThese addressable mimic relay boards CIOP4 and CIOP8 are 4 and 8 way soft addressing output modules incorporating integral short circuit isolators.Both the CIOP4 and the CIOP8 mimic relay boards are fully compatible with the current range of Cooper intelligent addressable control panels. The units are suitable for switching low voltage 24V dc at 1A maximum via a set of non-latching relay contacts.The flexibility of these modules is further enhanced by the fact that each output can be programmed for a range of triggers such as disablement fault fire test panel test zone pre-alarm fire routing equipment fire protecting equipment and reset with up to 16 different trigger sources per output.The trigger source can be global by panel by loop by zone or by address. The logic is available in both OR AND functions.These units have an additional 4 inputs which can initiate a reset silence evacuate and test function.They can be programmed using the CF3000 programmable site installer software and downloaded using the RS232 port.Key FeaturesLoop poweredUnits can be soft or hard addressedIntegral short circuit isolatorSingle address4 input 4 output version4 input 8 output versionPCB version incorporates 4 inputs- Reset- Silence- Evacuate- Test16 settings per outputTrigger types fire fault disablement test prealarm FRE FPE resetTrigger source global by panel by loop by zone by addressLogic functions OR ANDBenefitsQuick and simple to installPluggable terminals for ease of wiringProgrammable via site installer softwareCost effective installation solution

GBP 372.41

1

Cooper CIOP8 8 Way Mimic Relay Board with 4 Inputs amp 8 Outputs

Cooper CIOP8 8 Way Mimic Relay Board with 4 Inputs 8 OutputsThese addressable mimic relay boards CIOP4 and CIOP8 are 4 and 8 way soft addressing output modules incorporating integral short circuit isolators.Both the CIOP4 and the CIOP8 mimic relay boards are fully compatible with the current range of Cooper intelligent addressable control panels. The units are suitable for switching low voltage 24V dc at 1A maximum via a set of non-latching relay contacts.The flexibility of these modules is further enhanced by the fact that each output can be programmed for a range of triggers such as disablement fault fire test panel test zone pre-alarm fire routing equipment fire protecting equipment and reset with up to 16 different trigger sources per output.The trigger source can be global by panel by loop by zone or by address. The logic is available in both OR AND functions.These units have an additional 4 inputs which can initiate a reset silence evacuate and test function.They can be programmed using the CF3000 programmable site installer software and downloaded using the RS232 port.Key FeaturesLoop poweredUnits can be soft or hard addressedIntegral short circuit isolatorSingle address4 input 4 output version4 input 8 output versionPCB version incorporates 4 inputs- Reset- Silence- Evacuate- Test16 settings per outputTrigger types fire fault disablement test prealarm FRE FPE resetTrigger source global by panel by loop by zone by addressLogic functions OR ANDBenefitsQuick and simple to installPluggable terminals for ease of wiringProgrammable via site installer softwareCost effective installation solution

GBP 380.40

1

Cooper CASB393-WP Wall Sounder Weatherproof VAD with Isolator White Flash FXN559LPSWP MASB880WP

Cooper CASB393-WP Open Class Wall Sounder Weatherproof VAD with Isolator White Flash FXN559LPSWP MASB880WPThe new intelligent addressable open class visual alarm device CASB393 combines the high output sound of the wall sounders with a brighter LED. It is compliant to EN54-23 3 and 17 making it suitable for use as a Fire notification device within Europe. The CASB393 offers low current consumption maximising the number of devices that can be fitted on a loop and provides a flexible solution due to its soft addressing multiple tone and body options. The open class VAD comes in two variants the standard CASB393 and the weather-proof CASB393WP which is IP66 rated meaning it is ideal for outdoor locations.With both variants the open class VAD is suitable for all markets where EN54-23 VADs are now a requirement.Key FeaturesIntegral short circuit isolatorLoop poweredSoft addressedQuick and simple to installSelectable tones controlled by the panelAdjustable volume controlled by the panelIP66 version available as both an internal and weather-proof variant availableEasy to maintainservice

GBP 116.93

1

Cooper CASB393 Open Class Wall Sounder VAD With Isolator Red Body White Flash FXN559LPS MASB880

Cooper CASB393 Open Class Wall Sounder VAD With Isolator Red Body White Flash FXN559LPS MASB880The new intelligent addressable open class visual alarm device CASB393 combines the high output sound of the wall sounders with a brighter LED. It is compliant to EN54-23 3 and 17 making it suitable for use as a Fire notification device within Europe. The CASB393 offers low current consumption maximising the number of devices that can be fitted on a loop and provides a flexible solution due to it soft addressing multiple tone and body options. The open class VAD comes in two variants the standard CASB393 and the weatherproof CASB393WP which is IP66 rated meaning it is ideal for outdoor locations.With both variants the open class VAD is suitable for all markets where EN54-23 VADs are now a requirement.Key FeaturesIntegral short circuit isolatorLoop poweredSoft addressedQuick and simple to installSelectable tones controlled by the panelAdjustable volume controlled by the panelIP66 version available as both an internal and weather-proof variant availableEasy to maintainservice

GBP 114.18

1

Cooper Menvier EFXD05020 xDetect Sounder Circuit Card 2 Outputs

Cooper Menvier EFXD05020 xDetect Sounder Circuit Card 2 OutputsA sounder circuit card with 2 outputs designed for use with the Eaton xDetect panel.

GBP 101.74

1

Cooper Menvier EF-FMWB Fire Microphone - Wall Mounted

Cooper Menvier EF-FMWB Fire Microphone - Wall MountedThe Firefighters Microphone EF-FMWB is a wall-mounted microphone paging station with the push-button panel and fireman microphone for use with Eatons DAU500 voice alarm system. It can address up to 6 zones for emergency EVAC paging. It includes a fist microphone with built-in PTT button which can be pre-programmed to access a certain zone or group of zones. EVAC and ALERT messages may be triggered on the front of the panel by means of dedicated buttons.Additionally the firefighters microphone incorporates mandatory EN-54-16 system indications as well as faultemergency buzzer and mandatory manual controls including Lamp Test and system reset.It is easily connected to L-Net interface of the public address and voice alarm systems main DAU500 panel and can be daisy-chained with more L-Net devices.Key FeaturesHandheld firemens microphone with ALL-CALL buttonCoiled cord working length 1.10 mFully monitored fault systemAccess level 2 protected wallbox with STANDARD keylockZone selection and busy indicatorsPower Evac Fault Power supply System fault Network status indicatorsLamp test Silence Function Reset Evac Alert buttonsAddressableRedundant L-Net link 2 x RJ452 x RJ45 for ring spur or daisy-chain interfacing with the EFDAU500Dimensions 385 H x 440 W x 140 D

GBP 1423.18

1

Cooper FXN824 Conventional Base Sounder

Cooper FXN824 Conventional Base SounderThe conventional base mountable sounder MDS824FXN824 has a slim and aesthetically pleasing design and can be installed as either a discreet stand-alone sounder or ceiling mounted with a detector and base. The MDS824FXN824 is compatible with the Eaton range of conventional detectors and fire systems.Mounting with a detector and base simplifies the installation of the system by enabling a detector and sounder to be fixed at a single common point. When used as a stand-alone sounder the device can be either wall or ceiling mounted and completed with an optional cover plate MDS824COV. These conventional base mountable sounders are ideal for applications such as hotel bedrooms where a detector sounder is required.Key FeaturesDiscreet appearanceCan be used with detector as sounder base or stand alone as a sounderQuick and simple to installDiscreet low-profile designSingle installation pointCan be wired as stand-alone unitEasy to maintainservice

GBP 29.63

1

Cooper TA16-SS-BEZ Type A Outstation Bezel - Stainless Steel - Flush Mount

Cooper TA16-SS-BEZ Type A Outstation Bezel - Stainless Steel - Flush MountThe TA16-SS-BEZ is a bezel designed for use with the VoCALL TA16 Type A Outstation.The VoCALL Type A Digital Outstation is a compact unit which offers easy access via a magnetic push catch door.The outstation is compatible with VoCALL digital systems for use as a standard fire telephone or disabled refuge call point. It is compatible with all VoCALL digital systems.Key FeaturesType A Outstation BezelStainless steelFlush mount

GBP 86.80

1

Cooper ZPCB2202 Network Card

Cooper ZPCB2202 Network CardThe ZPCB2202 is a Network Card for use with the Easicheck range of products.

GBP 204.94

1

Cooper EFGVS11-PLUS-TCPIP TCPIP Graphics Package Unlimited Panels

Cooper EFGVS11-PLUS-TCPIP TCPIP Graphics Package Unlimited PanelsGraphical Visualisation Software license above 10 panels with TCPIP interlink

GBP 7197.86

1

Cooper CASB483WP External Wall Sounder VAD Red Flash 8500115FULL-0201X

Cooper CASB483WP External Wall Sounder VAD Red Flash 8500115FULL-0201XThis EN 54-23 compliant sounder beacon visual alarm device VAD is suitable for fire notification in commercial buildings. The weatherproof variant with an IP66 ingress protection rating can be used in wet and outdoor environments. Red CASB483WP or white CASB493WP flash options available.Key FeaturesDesigned for use with addressable systems

GBP 110.86

1

Cooper Menvier FL-RL-R-S Conventional Xenon Sounder Beacon Shallow Base

Cooper Menvier FL-RL-R-S Conventional Xenon Sounder Beacon Shallow BaseThe Xenon is an audible and visual device which requires one single installation point. This greatly reduces installation costs and is less obtrusive than two separate devices. Versions are available with the sounder and beacon linked or with separate terminals for independent operation.Key Features32 tones user selectable12V or 24VSecure clip fit baseVolume controlFire approved and Signalling tone optionsFor Fire Security and SignallingQuick fitting for easy installationReduce output to suit applicationBenefits Up to 103dBA with built in Xenon flashSuitable for a variety of applicationImproved tone clarity reducing confusion

GBP 52.80

1

Cooper Menvier FL-RL-R-D Conventional Xenon Sounder Beacon Deep Base

Cooper Menvier FL-RL-R-D Conventional Xenon Sounder Beacon Deep BaseThe Xenon is an audible and visual device which requires one single installation point. This greatly reduces installation costs and is less obtrusive than two separate devices. Versions are available with the sounder and beacon linked or with separate terminals for independent operation.Key Features32 tones user selectable12V or 24VSecure clip fit baseVolume controlFire approved and Signalling tone optionsFor Fire Security and SignallingQuick fitting for easy installationReduce output to suit applicationBenefits Up to 103dBA with built in Xenon flashSuitable for a variety of applicationImproved tone clarity reducing confusion