ProfitSpring | B2B PPC Agency

Dunlop BTL SL340 Motor Slide Base for 90-132 Frame Motor

Motor Slide Bases are used on all types of plant and equipment that involve or require belt tightening. Due to belt strengths and varying temperature, there is a need to regularly adjust the tightness of the belt to ensure machinery is running at its optimum efficiency. Experienced engineers can waste time in adjusting motors, but using a Motor Slide Base belts, these can be adjusted in minutes using a single socket or spanner. Easy to install and maintain absolute belt alignment throughout the tensioning process and reduce plant downtime.

GBP 53.99

1

Dunlop BTL SL430 Motor Slide Base for 90-160 Frame Motor

Motor Slide Bases are used on all types of plant and equipment that involve or require belt tightening. Due to belt strengths and varying temperature, there is a need to regularly adjust the tightness of the belt to ensure machinery is running at its optimum efficiency. Experienced engineers can waste time in adjusting motors, but using a Motor Slide Base belts, these can be adjusted in minutes using a single socket or spanner. Easy to install and maintain absolute belt alignment throughout the tensioning process and reduce plant downtime.

GBP 66.99

1

20-L-100F Imperial Pilot Bore Timing Pulley, 20 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

19-L-100F Imperial Pilot Bore Timing Pulley, 19 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

0-L-075F Imperial Pilot Bore Timing Pulley, 20 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 0.00

1

21-L-075F Imperial Pilot Bore Timing Pulley, 21 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 0.00

1

Dunlop BTL 40-L-100F Imperial Pilot Bore Timing Pulley, 40 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 25.99

1

Dunlop BTL 26-L-100F Imperial Pilot Bore Timing Pulley, 26 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 12.99

1

Dunlop BTL 30-L-100F Imperial Pilot Bore Timing Pulley, 30 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 15.99

1

Dunlop BTL 32-L-100F Imperial Pilot Bore Timing Pulley, 32 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 17.39

1

Dunlop BTL 28-L-100F Imperial Pilot Bore Timing Pulley, 28 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 14.39

1

Dunlop BTL 23-L-100F Imperial Pilot Bore Timing Pulley, 23 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 10.49

1

Dunlop BTL 24-L-100F Imperial Pilot Bore Timing Pulley, 24 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 10.99

1

Dunlop BTL 22-L-100F Imperial Pilot Bore Timing Pulley, 22 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 9.49

1

Dunlop BTL 34-L-100F Imperial Pilot Bore Timing Pulley, 34 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 18.99

1

Dunlop BTL 36-L-100F Imperial Pilot Bore Timing Pulley, 36 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 21.99

1

Dunlop BTL 18-L-100F Imperial Pilot Bore Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 12.99

1

Dunlop BTL 25-L-100F Imperial Pilot Bore Timing Pulley, 25 Teeth, 3/8" Pitch, for A 1" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 11.99

1

Dunlop BTL 34-L-075F Imperial Pilot Bore Timing Pulley, 34 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 16.99

1

Dunlop BTL 25-L-100F Imperial Taper Bore (1108) Timing Pulley, 25 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 15.99

1

Dunlop BTL 27-L-075F Imperial Pilot Bore Timing Pulley, 27 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 11.99

1

Dunlop BTL 18-L-075F Imperial Pilot Bore Timing Pulley, 18 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 6.99

1

Dunlop BTL 28-L-075F Imperial Pilot Bore Timing Pulley, 28 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 12.99

1

Dunlop BTL 22-L-075F Imperial Pilot Bore Timing Pulley, 22 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 8.49

1

Dunlop BTL 40-L-075F Imperial Pilot Bore Timing Pulley, 40 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop timing belt pulleys are manufactured from either C45 steel with black oxide surface treatment, cast iron EN-GJL-200 and black phosphate or aluminium 6082. Pulley flanges are produced from S235JR steel. Timing belt pulleys are available to suit all pitch sizes.

GBP 21.99

1

Brand

Size

Merchant

Price (EUR)

Dunlop BTL SL340 Motor Slide Base for 90-132 Frame Motor

Dunlop BTL SL430 Motor Slide Base for 90-160 Frame Motor

20-L-100F Imperial Pilot Bore Timing Pulley, 20 Teeth, 3/8" Pitch, for A 1" Wide Belt

19-L-100F Imperial Pilot Bore Timing Pulley, 19 Teeth, 3/8" Pitch, for A 1" Wide Belt

0-L-075F Imperial Pilot Bore Timing Pulley, 20 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

21-L-075F Imperial Pilot Bore Timing Pulley, 21 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop BTL 40-L-100F Imperial Pilot Bore Timing Pulley, 40 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 26-L-100F Imperial Pilot Bore Timing Pulley, 26 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 30-L-100F Imperial Pilot Bore Timing Pulley, 30 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 32-L-100F Imperial Pilot Bore Timing Pulley, 32 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 28-L-100F Imperial Pilot Bore Timing Pulley, 28 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 23-L-100F Imperial Pilot Bore Timing Pulley, 23 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 24-L-100F Imperial Pilot Bore Timing Pulley, 24 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 22-L-100F Imperial Pilot Bore Timing Pulley, 22 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 34-L-100F Imperial Pilot Bore Timing Pulley, 34 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 36-L-100F Imperial Pilot Bore Timing Pulley, 36 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 18-L-100F Imperial Pilot Bore Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 25-L-100F Imperial Pilot Bore Timing Pulley, 25 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 34-L-075F Imperial Pilot Bore Timing Pulley, 34 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop BTL 25-L-100F Imperial Taper Bore (1108) Timing Pulley, 25 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop BTL 27-L-075F Imperial Pilot Bore Timing Pulley, 27 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop BTL 18-L-075F Imperial Pilot Bore Timing Pulley, 18 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop BTL 28-L-075F Imperial Pilot Bore Timing Pulley, 28 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop BTL 22-L-075F Imperial Pilot Bore Timing Pulley, 22 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Dunlop BTL 40-L-075F Imperial Pilot Bore Timing Pulley, 40 Teeth, 3/8" Pitch, for A 3/4" Wide Belt

Powered by Cobiro