27 results (0,13984 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No Cover

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No Cover

Elmdene RAPIER-G3P-NC EN50131-4 Security Grade 3 Rapier External Sounder - No CoverThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note This product is for illustrative purposes only. No cover will be provided with this product.

GBP 54.76
1

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External Sounder

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External Sounder

Elmdene RAPIER-G3S EN50131-4 Security Grade 3 Rapier External SounderThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateStainless-steel coverSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsPortrait or landscape mountingAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 122.29
1

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No Cover

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No Cover

Elmdene RAPIER-G3S-NC EN50131-4 Security Grade 3 Rapier External Sounder No CoverThe Rapier range of high quality external sounders has been upgraded to fully meet the requirements of the new sounder standard EN50131-42009 Grade 3 and 4. They also include a host of new and improved features.The sounders include a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier sounders can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesGrade 3Twin PiezoTwin Strobe Twin Comfort LEDs 113db1mGalvanised Steel BackplateSAB operationTwin comfort LEDsRing line monitoringSelf-Test with Fault OutputRemote Test InputSelectable end of line resistorsSelectable cut off timerIntegral spirit levelLandscape or Portrait mounting - 342x221x55Designed to meet the requirements of EN50131-42009 Grade 3 and 4Low power operation 10mA standby 220mA full alarm - siren strobe113dBA sound outputBattery and piezo self-test with fault outputRemote test inputRing line monitoringSilent engineer modeRange of selectable integral EOL tamper resistorsPortrait or landscape mountingAudible tamper status to assist commissioningLED strobeTwin flashing comfort LEDsFull SAB capabilitySelectable positive hold-off signallingDiagnostic LEDCascade tamper for multiple sounder installationsTwo internal spirit level to aid vertical or horizontal mounting3-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 90.65
1

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe amp Twin Comfort LED

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe amp Twin Comfort LED

Elmdene RAPIER-6510-NC External Sounder - Grade 3 -Twin Piezo -Twin Strobe Twin Comfort LEDThe INCERT approved Rapier 6510 external sounder fully meets the requirements of EN50131-42009 Grade 3. It also includes a host of new and improved features.The sounder now includes a diagnostic LED which will flash to indicate problems with the sounder versatile trigger options and comfort LEDs to signal that the device is working. Control panel dependent end of line resistors also help make installation easier.The Rapier 6510 sounder can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless-steel covers clean lines give a smart and aesthetically-pleasing look to the unit.Key FeaturesINCERT ApprovedDesigned to meet the requirements of EN50131-42009 Grade 3Low power operation 10mA standby 180mA full alarm siren strobeBattery and Piezo self-test with fault outputRange of selectable integral EOL tamper resistorsCan be mounted portrait or landscapeAudible tamper closure to assist commissioningSelectable positive hold-off signallingCascade tamper for multiple sounder installationsRemote test inputRing line monitoringSilent engineer modeDiagnostic LEDLED strobeTwin flashing comfort LEDsFull SAB capability

GBP 54.81
1

Elmdene VRS125000EE 12V d.c. Switch Mode PSU 5Amp - Encapsulated In Plastic Case

Elmdene VRS125000EE 12V d.c. Switch Mode PSU 5Amp - Encapsulated In Plastic Case

Elmdene VRS125000EE 12V d.c. Switch Mode PSU 5Amp - Encapsulated In Plastic CaseThe VRS125000EE is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.

GBP 18.17
1

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel Plate

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel Plate

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel PlateThe AMS-EBIR3-RG is a touch-free exit button ideal for clean environments or buildings for contactless door control within a building. IR Exit Devices are designed for use in access control systems.The Elmdene IR exit device is a proximity touch free request to exit device designed for use in access control systems. Offered in a standard UK single gang plate size it is made from durable stainless steel with an IP65 rated Infra-Red switch component.The smart stainless steel plate with the LED illumination provides a modern and aesthetically pleasing solution to a buildings door entryexit system.The standard colour indication for the IR exit devices is red for standby and green for activated. However it is possible for this to be reversed by use of a jumper allowing green to be used for standby and red for activated. This gives flexibility to the installer should a particular colour coding be required.ApplicationsReduce contact and transmission of infections in high traffic areas such as hospitals food preparation rooms care homes and schools.Key FeaturesDiscrete surface mount designTouch-free activationRed LED turns Green when activated interchangeableMade from durable stainless steelAdjustable latch time from 0.5 to 30 secondsAdjustable trigger distance from 4 - 15cmDesigned to prevent any interference with other infra-red devicesLong life infra-red sensor 100000 hours relay 1000000 operationsIR switch component is IP65 rated1 year warrantyComNONC ContactsAdjustable range and latch time

GBP 34.45
1

Elmdene MFR-1 Mains Fail Relay For Use With Any PSU

Elmdene MFR-1 Mains Fail Relay For Use With Any PSU

Elmdene MFR-1 Mains Fail Relay For Use With Any PSUStand-alone Mains Fail Relay provides a volt free fault output for remote signalling of a mains fail condition.Key FeaturesInstantly detects loss of mainsNC contacts rated at 8A 27.6VCan be fitted to most Elmdene boxed 12 24V Power SuppliesNormally closed volt free contact opens on mains failureSupplied with choice of stand-offsMaximum Supply Voltage 230Vac - 10Maximum Switching Current 8A 27.6V dcOperating Temperature -10 to 40CDimensions 65L x 60W x 30D

GBP 18.79
1

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-ENC-T Li-Power Enclosure with TamperLi-Power power supplies have been designed to house andpower common alarm signalling communicators whilst accommodating and chargingin-built Lithium battery packs. Offered in a low-profile sleek enclosure itprovides a compact and flexible solution for intruder installations at bothGrade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesExtended life span up to 3 times more than a standard lead acidbattery50 reduction in wall footprint requiredUp to 5 times greater power cycling performanceIncorporates additional battery safety features

GBP 41.66
1

Elmdene LPS-12-G2 Li-Power PSU with 9Ah Battery

Elmdene LPS-12-G2 Li-Power PSU with 9Ah Battery

Elmdene LPS-12-G2 Li-Power PSU with 9Ah BatteryLi-Power power supplies have been designed to house and power common alarm signalling communicators whilst accommodating and charging in-built Lithium battery packs. Offered in a low-profile sleek enclosure it provides a compact and flexible solution for intruder installations at both Grade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesIdeal for housing common communication alarm signalling devicesProvides 150mA to loadMains fail signalling EPSGeneral PSU fault signalling GENFront and rear tamper protectionSleek compact plastic enclosure12Vdc outputCompliant with EN50131-6 Grade 212 hour battery backupL266 x W195 x D60 mm1.0kg

GBP 111.10
1

Elmdene LPS-12-G3 Li-Power PSU with 18Ah Battery

Elmdene LPS-12-G3 Li-Power PSU with 18Ah Battery

Elmdene LPS-12-G3 Li-Power PSU with 18Ah BatteryLi-Power power supplies have been designed to house and power common alarm signalling communicators whilst accommodating and charging in-built Lithium battery packs. Offered in a low-profile sleek enclosure it provides a compact and flexible solution for intruder installations at both Grade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesIdeal for housing common communication alarm signalling devicesProvides 150mA to loadMains fail signalling EPSGeneral PSU fault signalling GENFront and rear tamper protectionSleek compact plastic enclosure12Vdc outputCompliant with EN50131-6 Grade 330 hour battery backupL266 x W195 x D60 mm 1.0kg

GBP 144.42
1

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK Plug

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK Plug

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a UK plug.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeUK Plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a European plug EE.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeFitted with European plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 188.21
1

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries

Elmdene 24Vdc 5A 0.8A Switch Mode PSU EN54 Approved 2x 7Ah Batteries -STX2405-CThe STX2405 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 5 Amps continuous into the load in addition to providing up to 850mA for charging the standby batteries up to 17Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation. Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 5A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 167.24
1

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene 24Vdc 2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 147.38
1

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah Batteries

Elmdene 24Vdc 1.8A 0.7A Switch Mode PSU EN54 Approved 2 x 17Ah BatteriesThe STX2402 is an EN54-4 approved power supply ideal for use in Fire and Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 2.0 Amps continuous into the load in addition to providing up to 700 mA for charging the standby batteries up to 17 Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode whereby it will check and top up battery charge every 24 hours but will not waste energy by continuously attempting to charge a fully charged battery. This also extends the operating life of the batteries. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 2002 A2 2006.Up to 2.0A current to load at 27.6V dc nominal regulated output.Charging capability to support 7 or 17Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 17AhE Box Power Supply - 420h x 400w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 164.36
1

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic Case

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic Case

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic CaseElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models. The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The units have a neat and compact design and come fitted with either a UK or Euro mains plug. The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option. Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded UKEBEuropean PlugEESize 120x50x30

GBP 17.81
1

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic Case

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic Case

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic CaseElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The units have a neat and compact design and come fitted with either a UK or Euro mains plug. The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option. Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded European PlugSize 78x52x25

GBP 15.26
1

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah Batteries

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah Batteries

Elmdene 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 1.2Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 1.2AhT Box Power Supply - 300h x 240w x 63d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 115.54
1

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah Batteries

Elmdene STX2401-C 24Vdc 1.2A 0.3A Switch Mode PSU EN54 Approved 2 x 7Ah BatteriesThe STX2401 is an EN54-41997 A1 A2 approved power supply ideal for use in Fire Smoke and ventilation control Systems. Its regulated 27.6V dc output will supply up to 1.2 Amps continuous current into the load in addition to providing up to 300mA for charging the standby batteries up to 7Ah. The power supply output features electronic short circuit protection under both mains and standby battery operation.Maximum battery life is assured through continuous active battery monitoring and the use of a two stage charger comprising bulk and temperature compensated final float phase depending upon battery condition.Once fully charged the product operates in Eco power saving mode whereby the batteries are charged for 4 hours in every 24 hour period while still being continuously monitored. This reduces wasted energy in charging already fully charged batteries and extends their working life. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.Key FeaturesCertified by UL to EN54-41997 A1 A2.Up to 1.2A current to load at 27.6V dc nominal regulated output.Charging capability to support 1.2 to 7Ah batteries.Electronic overload protection shuts down output until overload or short circuit is removed.Battery Monitor detects battery missing low battery short-circuit or reverse connection or circuitimpedance Ri in excess of 500mW caused by connector or wiring problemcorrosion within 4 hours.Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V.No loss of output during automatic connection of battery to load on loss of mains.Deep discharge protection disconnects battery from load when battery voltage falls below 21 V.Diagnostic indicator LED Orange Internal.Fault indicator LED Yellow flashes on detection of output fault battery fault charger fault and mains failure.Mains indicator LED Green showing mains present Indicators check at start-up.Optional RS232 serial interface for fault reporting and diagnostics.Suitable to fit batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 136.90
1

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V Box

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V Box

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V BoxHigh efficiency cost effective UL294-listed power supplycharger designed for use in Access Control systems enclosed in spacious cabinet fitted with two locks and a tamper switch.Regulated 13.8V dc output with battery stand-by supplying rated current to 8 independently PTC fused outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal.Class 2 or 8Amax Non-Power-Limited outputs available. Additional 0.5A for charging a 12V stand-by battery. PSU Universal mains input offers geographical flexibility. A dry volt free contact is provided for a loss of mains signalling.Key FeaturesAC-DC High power moduleGreen Mains present LEDContinuous full rated current to load at 12V 8AYellow Fault LEDUniversal mains input voltage 100-240VacNon-Power-Limited output availableFull electronic short circuit and overload protectionVersatile fire relay functionalityIndividual battery and output fuse protection8-way Class 2 fused outputs with health LEDsHigh efficiency electronics for reduced running costs and operating temperaturesIndependent ancillary relay 12Vdc or 24Vdc controlledInstaller safe design with all high voltage electronics fully shroudedEnclosure fitted with a tamper switch and locksMains transient protection circuitUL294 Listed for Access Control SystemsDestructive Attack I Endurance IV Line Security I Stand-by Power-IIDry contact indicating loss of AC mains MAINS FAIL. Required to be monitored by UL listed control unit in UL294 application.

GBP 405.64
1

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK Plug

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK Plug

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK PlugThe VRS125000EB-4 is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key Features4-Way Splitter CableUK PlugFully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 19.98
1

Elmdene VRS125000EB 12V d.c. Switch Mode PSU - 5Amp - Mains Moulded UK Plug

Elmdene VRS125000EB 12V d.c. Switch Mode PSU - 5Amp - Mains Moulded UK Plug

Elmdene VRS125000EB 12V d.c. Switch Mode PSU - 5Amp - Mains Moulded UK PlugThe VRS125000EB is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key Features5AmpMains Moulded UK PlugEncapsulated in plastic caseIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorSize 120x50x30Fully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 18.17
1

Elmdene VRS122000EB 12V d.c. Switch Mode PSU - 2Amp - Mains Moulded UK Plug

Elmdene VRS122000EB 12V d.c. Switch Mode PSU - 2Amp - Mains Moulded UK Plug

Elmdene VRS122000EB 12V d.c. Switch Mode PSU - 2Amp - Mains Moulded UK PlugThe VRS122000EB is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesEncapsulated in plastic caseIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded UK PlugSize 78x52x25Fully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 14.10
1