ProfitSpring | B2B PPC Agency

Elmdene FIREFOM-12-4 12V Interface Relay

Elmdene FIREFOM-12-4 12V Interface RelayThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device. The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesProvides 4 individually fused outputsMultiple Trigger configurationsContact rating 8A 12V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device

GBP 20.33

1

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused Outputs

Elmdene FIREFOM-12-12 12V Interface Relay Provides 12 Individually Fused OutputsThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device.The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesMultiple Trigger configurationsContact rating 8A 12V dc 4A 24V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device - retrofit into any boxed

GBP 32.96

1

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused Outputs

Elmdene FIREFOM-12-8 12V Interface Relay Provides 8 Individually Fused OutputsThis range of interface relays are available in 12V and 24V versions and provide 4 8 or 12 individually fused outputs - dependant on model. Each output is selectable to be either permanently on or switched via a remote signal from a Fire Panel or other control device.The remote signal can be either dry contacts NO NC or a low voltage input. Typically used in Access Control applications to remove power from locks while maintaining power to the ACU on a Fire Alarm activation.Key FeaturesMultiple Trigger configurationsContact rating 8A 12V dc 4A 24V dcEach output selectable for switched permanently on or disabledLED indication when Relay EnergisedLow current consumptionStandalone device - retrofit into any boxed

GBP 26.38

1

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel Plate

Elmdene AMS-EBIR3-RG Infra-Red Exit Device - 12V - Stainless Steel PlateThe AMS-EBIR3-RG is a touch-free exit button ideal for clean environments or buildings for contactless door control within a building. IR Exit Devices are designed for use in access control systems.The Elmdene IR exit device is a proximity touch free request to exit device designed for use in access control systems. Offered in a standard UK single gang plate size it is made from durable stainless steel with an IP65 rated Infra-Red switch component.The smart stainless steel plate with the LED illumination provides a modern and aesthetically pleasing solution to a buildings door entryexit system.The standard colour indication for the IR exit devices is red for standby and green for activated. However it is possible for this to be reversed by use of a jumper allowing green to be used for standby and red for activated. This gives flexibility to the installer should a particular colour coding be required.ApplicationsReduce contact and transmission of infections in high traffic areas such as hospitals food preparation rooms care homes and schools.Key FeaturesDiscrete surface mount designTouch-free activationRed LED turns Green when activated interchangeableMade from durable stainless steelAdjustable latch time from 0.5 to 30 secondsAdjustable trigger distance from 4 - 15cmDesigned to prevent any interference with other infra-red devicesLong life infra-red sensor 100000 hours relay 1000000 operationsIR switch component is IP65 rated1 year warrantyComNONC ContactsAdjustable range and latch time

GBP 34.45

1

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V Box

Elmdene MULTI-ACCESS-UL-PSU6 UL294 12V 8A PSU With 8 Way Fused Output Module In V BoxHigh efficiency cost effective UL294-listed power supplycharger designed for use in Access Control systems enclosed in spacious cabinet fitted with two locks and a tamper switch.Regulated 13.8V dc output with battery stand-by supplying rated current to 8 independently PTC fused outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal.Class 2 or 8Amax Non-Power-Limited outputs available. Additional 0.5A for charging a 12V stand-by battery. PSU Universal mains input offers geographical flexibility. A dry volt free contact is provided for a loss of mains signalling.Key FeaturesAC-DC High power moduleGreen Mains present LEDContinuous full rated current to load at 12V 8AYellow Fault LEDUniversal mains input voltage 100-240VacNon-Power-Limited output availableFull electronic short circuit and overload protectionVersatile fire relay functionalityIndividual battery and output fuse protection8-way Class 2 fused outputs with health LEDsHigh efficiency electronics for reduced running costs and operating temperaturesIndependent ancillary relay 12Vdc or 24Vdc controlledInstaller safe design with all high voltage electronics fully shroudedEnclosure fitted with a tamper switch and locksMains transient protection circuitUL294 Listed for Access Control SystemsDestructive Attack I Endurance IV Line Security I Stand-by Power-IIDry contact indicating loss of AC mains MAINS FAIL. Required to be monitored by UL listed control unit in UL294 application.

GBP 405.64

1

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D Box

Elmdene ACCESS-UL-PSU2 UL294 12V 4A PSU With 4 Way Fused Output Module In D BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellD Enclosure 505 x 407 x 80

GBP 280.66

1

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G Box

Elmdene ACCESS-UL-PSU1 UL294 12V 4A PSU With 4 Way Fused Output Module In G BoxElmdenes UL294-certified power solutions have been designed for compatibility with the most common access control door controllers. They offer installation flexibility and are a time-saving solution for system designers.These enclosures are engineered to accommodate multiple door controllers providing power integration within access control systems. This enables robust power management to ensure seamless operation and optimised performance of your access control systems.By choosing Elmdenes compliant power solutions you can rest assured that your access control systems will operate smoothly and efficiently. These power solutions are the perfect fit for system designers who value flexibility and reliability in their power supply solutions.This high efficiency cost effective UL294-listed power supplycharger is designed for use in Access Control systems enclosed in two spacious cabinet choices each fitted with locks and tamper switch.Regulated 13.8Vdc output with battery stand-by supplying rated current to 4 independently PTC Fused Outputs resettable fuses individually configured for continuous or switched output current via a fire relay switch with flexible trigger options capable of operating with any external control signal. PSU Universal mains input. Two dry volt free contacts are provided to signal loss of mains and battery output faults.Key FeaturesSingle and Multi-door solutions12V standby battery chargingMulti-fused outputs are providedMains fail reportingBattery Monitoring and Deep Discharge Protection ACCESS-UL-PSU1 and ACCESS-UL-PSU2Independent ancillary relay for applications such as a Fire door release relayIntegration with door controllers including Mercury Security ProWatch HoneywellG Enclosure 440 x 250 x 115

GBP 241.67

1

Brand

Merchant

Price (EUR)