ProfitSpring | B2B PPC Agency

Faithfull Mains Tester Screwdriver FAIMTS

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.

GBP 5.39

1

Faithfull Mains Tester Screwdriver, Long

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.

GBP 5.99

1

Faithfull Battery Tester for AA, AAA, C, D & 9V FAIDETBAT

This Faithfull Battery Tester is simple and easy-to-use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 and 1.5V button cell batteries, and folds down for easy storage. Features Analogue needle indicator. Tests D, C, AA, AAA, 9V 6F22 batteries. Tests 1.5V button cell batteries. NOTE The tester is activated by the battery being checked. Keep test time as short as possible to avoid unnecessary battery drain.

GBP 7.99

1

Faithfull Voltage Detector Pen 50-1000V ac

This Faithfull Voltage Detector is a handy instrument that uses a safe, non-contact method to detect AC voltage in outlets, lighting fixtures, circuit breakers, wires and cables and can be used to find circuit breaks in a wire. A voltage test is easy to carry out by simply holding the detector by its body and placing the white end cap near or onto a cable or fitting believed to be carrying electricity. The detector tip will light up RED if a voltage is present. The tester can be used to detect voltage from 50 to 1,000 VAC. The tester is a convenient pen size with a fixing clip and easily fits into pockets ready for use. Features:LED detects the presence of AC current.Locate breaks in power cables and wires.Non contact testing for complete safety.Convenient pen size with a pocket clip.2 x 1.5V AAA Alkaline Batteries included. Specification:Voltage Detection: 50V-1,000V ACFrequency: 50-500HzMeasurement: CAT II, 1000VCategory: CAT III, 600V Warning:Always test on a known live circuit before use.This detector is not designed to carry out contact tests on live supplies. Any other form of test should be carried out by a qualified electrician.

GBP 8.29

1

Faithfull Edge Masking Tape 36mm x 41.1m FAITAPEEDG36

Faithfull Edge Masking Tape gives you clean, sharp line edges when used on most smooth surfaces. It is lower tack than normal masking tape and will withstand UV sunlight for up to 30 days. Can be used on cured* painted walls and trim, glass, metal and many other surfaces. It will remove cleanly from most surfaces for up to 21 days after application. For use with emulsion and acrylic paints. Comes in a tub to keep the edges sharp. *In relation to paint, cured does not mean the same thing as dry. The curing of paint takes place on a chemical level and is not just the evaporation of liquid from the paint. A cured paint will be a solid state throughout, not just dry to the touch. An emulsion paint may feel dry within hours after painting but factors such as humidity, paint colour and the number of coats will impact how long it takes it to actually cure, sometimes up to a few weeks. Most of the curing process usually occurs within 3 days but we recommend testing Faithfull Edge Masking Tape in an inconspicuous area if you have concerns about your paint being cured.

GBP 6.99

1

Faithfull Edge Masking Tape 24mm x 41.1M

Faithfull Edge Masking Tape gives you clean, sharp line edges when used on most smooth surfaces. It is lower tack than normal masking tape and will withstand UV sunlight for up to 30 days. Can be used on cured* painted walls and trim, glass, metal and many other surfaces. It will remove cleanly from most surfaces for up to 21 days after application. For use with emulsion and acrylic paints. Comes in a tub to keep the edges sharp. *In relation to paint, cured does not mean the same thing as dry. The curing of paint takes place on a chemical level and is not just the evaporation of liquid from the paint. A cured paint will be a solid state throughout, not just dry to the touch. An emulsion paint may feel dry within hours after painting but factors such as humidity, paint colour and the number of coats will impact how long it takes it to actually cure, sometimes up to a few weeks. Most of the curing process usually occurs within 3 days but we recommend testing Faithfull Edge Masking Tape in an inconspicuous area if you have concerns about your paint being cured.

GBP 8.49

1

Brand

Merchant