ProfitSpring | B2B PPC Agency

Faithfull Multimeter LCD Display FAIDETMULTI

This handy Faithfull Multimeter can be used for the measurement of DC / AC voltage, DC current and Resistance and for Diode and Transistor testing and Audible Continuity testing. This meter is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. All test functions are easily accessible by rotating the 20-position range selector switch to the required function. The multimeter has many features to facilitate safe use including overload protection, recessed input terminals, automatic negative polarity and over-range indication. Additional features include a rubber protective housing with integral stand for easy visibility, a large 3 digit LCD backlit display with auto power off and low battery warning. Features: 20-position rotary function and range selector.Precision reading and stable performance.Recessed input terminals for added safety.Supplied with test leads, battery and instruction manual.Overload protection.Easy to read backlit display panel.Auto power-off.Low battery indication.Protective rubber housing with integral stand for easy visibility.9 volt 6F22 Alkaline Battery included. Specifications: Display: 3-digit LCD, Max reading 1999.Measuring method: Dual-slope integration A/D converter.Operating temperature: 0C - 40C (32F -104F).Dimensions: 138 x 69 x 31mm.Weight: approx. 170g (including battery).

GBP 23.99

1

Faithfull Socket Polarity Tester with RCD Test Function FAIDETSOCRCD

The Faithfull Socket Tester is an essential mains safety tester designed for testing socket wiring and RCDs. It will determine whether a socket is wired correctly or incorrectly. Used in conjunction with the coding table provided, the 5 combined indicators show the true status of the sockets wiring condition. It provides a true ground error indication through the LCD if dangerous contact voltage is present at the protective earth (PE). The use of 3 neon indicators for L-N-PE provides rapid detection of correct/incorrect socket wiring. It is equipped with an additional RCD tester for testing the operation of RCDs with a rating of not more than 30mA. Specification Socket Type UK 240V 3-Pin Nominal Voltage 220V & plusmn10% Frequency Range 5060Hz Measurement Category CATIII, 300V RCD Test Time 60300ms Contact Voltage Threshold & lt35 AC against ground depending on coupling to earth RCD Test Current 30mA & plusmn15% Dimensions 77 x 67 x 66mm Weight approx. 70g

GBP 21.99

1

Faithfull Claw Hammer Steel Shaft 567g (20oz) FAICAS20

The Faithfull Carpenters Hammer with precision ground and hardened curved claws to withstand the most heavy nail pulling. The securely fitted steel shaft providing maximum leverage. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment and overall dimensions. Features: Hardened and heat-treated head. Precision ground striking face. Sturdy claw for nail pulling. Tubular steel shaft. Rubber non-slip handle grip.

GBP 12.49

1

Faithfull Joiners Hammer FSC Hickory 340g (12 Oz)

The Faithfull Joiners Hammer comes with a seasoned hickory handle. Made with FSC 100% certified wood from well-managed forests. This universal carpenters hammer has a precision ground and hardened pein and head. This well balanced hammer allows maximum use for all types of carpenters fixings. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment and overall dimensions.

GBP 15.99

1

Faithfull Claw Hammer Steel Shaft 454g (16oz) FAICAS16

The Faithfull Carpenters Hammer with precision ground and hardened curved claws to withstand the most heavy nail pulling. The securely fitted steel shaft providing maximum leverage. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment and overall dimensions. Features: Hardened and heat-treated head. Precision ground striking face. Sturdy claw for nail pulling. Tubular steel shaft. Rubber non-slip handle grip.

GBP 14.99

1

Faithfull Joiners Hammer FSC Hickory 227g (8oz)

The Faithfull Joiners Hammer comes with a seasoned hickory handle. Made with FSC 100% certified wood from well-managed forests. This universal carpenters hammer has a precision ground and hardened pein and head. This well balanced hammer allows maximum use for all types of carpenters fixings. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment and overall dimensions.

GBP 16.39

1

Faithfull Claw Hammer Steel Shaft 227g (8oz) FAICAS8

The Faithfull Carpenters Hammer with precision ground and hardened curved claws to withstand the most heavy nail pulling. The securely fitted steel shaft providing maximum leverage. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment and overall dimensions. Features: Hardened and heat-treated head. Precision ground striking face. Sturdy claw for nail pulling. Tubular steel shaft. Rubber non-slip handle grip.

GBP 10.29

1

Faithfull Mains Tester Screwdriver, Long

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.

GBP 6.19

1

Faithfull Mains Tester Screwdriver FAIMTS

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.

GBP 5.69

1

Faithfull Battery Tester for AA, AAA, C, D & 9V FAIDETBAT

This Faithfull Battery Tester is simple and easy-to-use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 and 1.5V button cell batteries, and folds down for easy storage. Features Analogue needle indicator. Tests D, C, AA, AAA, 9V 6F22 batteries. Tests 1.5V button cell batteries. NOTE The tester is activated by the battery being checked. Keep test time as short as possible to avoid unnecessary battery drain.

GBP 7.59

1

Faithfull Pocket Portable Multimeter FAIDETPOCKET

The Faithfull Pocket Portable Multimeter is a compact unit contained within a flip open case. It is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. With a 3.1/2 digit LCD display, this multimeter is suitable for measuring DC and AC voltage, DC and AC current, resistance, diode and continuity. It features data hold and polarity indication. It is easy to operate and carry, and is an ideal measurement tool. Supplied with batteries, test leads and user manual. Specification AC Voltage 200-250V DC Voltage 2V/20V/200V/300V DC Current 200mA Resistance 2k/20k/200k/2000k Diode Check 2.5V Continuity & gt 30 Cat II 250V Power 2 x 1.5V LR44 batteries (supplied) Dimensions 114 x 55 x 22mm Weight approx. 100g (including battery)

GBP 21.49

1

Faithfull Voltage Detector Stick - GK16

The Faithfull Voltage Detector Stick is a non-contact AC voltage detector for detecting 5-1000V AC voltage. It is ideal for testing sockets and wires, and for detecting break points in a live wire.When AC voltage is detected, the indicator LED will flash red and the built-in buzzer will sound short beeps. The rotary power switch can be used to adjust the unit's detection sensitivity and an illumination function is provided for use in dark places. The detector's LED will flash red periodically to indicate there is sufficient battery power left. The casing features a pocket clip to help keep the unit close to hand.Supplied with batteries and user manual. Specification: Voltage Detecting Range: 5-1000V ACFrequency Range: 50~400HzSafety Category: CAT IV 1000VPower: 2 x 1.5V AAA batteries (supplied)Size: 154 x 32 x 28mmWeight: approx. 50g (including batteries)

GBP 18.99

1

Faithfull Auto-Range Digital Multimeter FAIDETAUTO

The Faithfull Auto-Range Digital Multimeter features a large 3.1/2 digit LCD backlit display and a slimline case that will fit into a pocket. This digital multimeter is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. It can be used to measure DC and AC voltage, DC and AC current, resistance, and diode continuity. All test functions are easily accessible by rotating the 6-position range selector switch to the required function. The multimeter has many features to facilitate safe use including overload protection, recessed input terminals, automatic negative polarity and over-range indication. Additional features include a data storage function, auto power off and low battery warning. Supplied with batteries, test leads and user manual. Functions DC Voltage 200mV/2V/20V/200V/600V DC Current 2V/20V/200V/600V AC Voltage 10A AC Current 10A Resistance 200/2K/20k/200k/2M/20M Continuity Yes Specification CATIII Power 2 x 1.5V AAA batteries (supplied) Dimensions 176 x 79 x 17.5mm Weight approx. 355g (including battery)

GBP 59.99

1

Faithfull Edge Masking Tape 24mm x 41.1M

Faithfull Edge Masking Tape gives you clean, sharp line edges when used on most smooth surfaces. It is lower tack than normal masking tape and will withstand UV sunlight for up to 30 days. Can be used on cured* painted walls and trim, glass, metal and many other surfaces. It will remove cleanly from most surfaces for up to 21 days after application. For use with emulsion and acrylic paints. Comes in a tub to keep the edges sharp. *In relation to paint, cured does not mean the same thing as dry. The curing of paint takes place on a chemical level and is not just the evaporation of liquid from the paint. A cured paint will be a solid state throughout, not just dry to the touch. An emulsion paint may feel dry within hours after painting but factors such as humidity, paint colour and the number of coats will impact how long it takes it to actually cure, sometimes up to a few weeks. Most of the curing process usually occurs within 3 days but we recommend testing Faithfull Edge Masking Tape in an inconspicuous area if you have concerns about your paint being cured.

GBP 7.29

1

Faithfull Voltage Detector Pen 50-1000V ac

This Faithfull Voltage Detector is a handy instrument that uses a safe, non-contact method to detect AC voltage in outlets, lighting fixtures, circuit breakers, wires and cables and can be used to find circuit breaks in a wire. A voltage test is easy to carry out by simply holding the detector by its body and placing the white end cap near or onto a cable or fitting believed to be carrying electricity. The detector tip will light up RED if a voltage is present. The tester can be used to detect voltage from 50 to 1,000 VAC. The tester is a convenient pen size with a fixing clip and easily fits into pockets ready for use. Features:LED detects the presence of AC current.Locate breaks in power cables and wires.Non contact testing for complete safety.Convenient pen size with a pocket clip.2 x 1.5V AAA Alkaline Batteries included. Specification:Voltage Detection: 50V-1,000V ACFrequency: 50-500HzMeasurement: CAT II, 1000VCategory: CAT III, 600V Warning:Always test on a known live circuit before use.This detector is not designed to carry out contact tests on live supplies. Any other form of test should be carried out by a qualified electrician.

GBP 8.99

1

Faithfull Digital Thermometer FAIDETTHERM

A Faithfull high-precision digital electronic thermometer, for use in both industrial and domestic applications where accurate temperature readings are required. Ideal for use in laboratories for temperature testing and monitoring and essential for use when preparing cooked foods such as meat, poultry, infant milk and many other foods when accurate temperature readings are necessary. This thermometer can be set for either Celsius or Fahrenheit measurement, maximum or minimum readings and has a useful data hold facility. The easy-clean stainless steel probe features a sharp point with a Slimline design allowing effortless penetration of meats and provides a fast response time when taking readings. The large LCD digital display is easy to read and has an automatic power off function when not in use. The thermometer is supplied in with a probe cover for safe storage when not in use. Features Clear easy-to-read LCD display. Celsius or Fahrenheit readout. Data hold facility. Stainless Steel slimline easy clean probe. 1.5V LR44 battery included. Pocket size. Automatic power off function. Probe cover for safe storage. SPECIFICATION Measuring Range (Probe) Celsius Temperature -40C to 250C. Fahrenheit Temperature -40F to 482F. Operating Temperature 0C (32F) to 50C (122F).

GBP 15.39

1

Faithfull Edge Masking Tape 36mm x 41.1m FAITAPEEDG36

Faithfull Edge Masking Tape gives you clean, sharp line edges when used on most smooth surfaces. It is lower tack than normal masking tape and will withstand UV sunlight for up to 30 days. Can be used on cured* painted walls and trim, glass, metal and many other surfaces. It will remove cleanly from most surfaces for up to 21 days after application. For use with emulsion and acrylic paints. Comes in a tub to keep the edges sharp. *In relation to paint, cured does not mean the same thing as dry. The curing of paint takes place on a chemical level and is not just the evaporation of liquid from the paint. A cured paint will be a solid state throughout, not just dry to the touch. An emulsion paint may feel dry within hours after painting but factors such as humidity, paint colour and the number of coats will impact how long it takes it to actually cure, sometimes up to a few weeks. Most of the curing process usually occurs within 3 days but we recommend testing Faithfull Edge Masking Tape in an inconspicuous area if you have concerns about your paint being cured.

GBP 6.99

1

Faithfull Black Steel Jerry Can 20 Litre

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 29.99

1

Faithfull Green Jerry Can - Metal 10 litre FAIAUJERRY10

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 30.99

1

Faithfull Green Jerry Can - Metal 5 litre FAIAUJERRY5

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 24.99

1

Faithfull Green Jerry Can - Metal 20 litre FAIAUJERRY20

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 26.99

1

Faithfull Red Steel Jerry Can 20 Litre

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.