ProfitSpring | B2B PPC Agency

Fireclass 517.300.021FC WT300 Walk-Test Controller

Fireclass 517.300.021FC WT300 Walk-Test ControllerThe WT300 Walk-Test Tool is a hand-held unit for remotely activating the self-test features of the FV300 detectors. The unit is battery powered and can activate the alarm test window test or reset the FV300 detector from a range of over 6m by using an infra-red link.The WT300 can be used in hazardous areas. It is housed in a plastic enclosure with an anti-static coating. To prevent accidental operation the WT300 needs to be unlocked using the keypad before a command can be sent. It is an intrinsically safe unit and has been approved to use Duracell Procell MN1500 batteries only. No other types may be used in a hazardous area.In a safe area undo the two screws and remove the cover from the battery compartment. Remove the old batteries. Fit a pair of new batteries noting polarity as shown by markings in the bottom of the compartment. Refit the cover and secure with the screws. Dispose of old batteries considerately.Key FeaturesBattery powered using AA cellsUsed for remotely activating the self-test features of FV300 detectors

GBP 1640.86

1

Fireclass 516.016.154FC ProReact EN Analogue Composite Control Unit

Fireclass 516.016.154FC ProReact EN Analogue Composite Control UnitThe ProReact EN Analogue LHD system has a wide range of available alarm temperatures to suit different environments. All of which can be programmed on the LCD display on the ProReact EN Analogue Composite Control Unit or through a laptop connection.Installers can also select pre-alarm temperatures through the control unit to receive an early notification of an unexpected rise in temperature before a chosen alarm temperature is reached.Each ProReact EN Analogue Composite Control Unit comes with a Modbus RS-485 output and an inbuilt test feature as standard.Typical applications includeCar parksFactories processing plantsWarehousesCable traysConveyor beltsData centres

GBP 588.76

1

Fireclass FC501-HK Triple Circuit Single Loop Panel with Icons and 2.5A PSU

Fireclass FC501-HK Triple Circuit Single Loop Panel with Icons and 2.5A PSUFC501 is the newest FireClass addressable solution for small systems brought to you by Tyco Fire Protection Products. Conceived to be extremely easy to install and use the FC501 is an out of the box panel which offers the simplicity of a conventional system and the benefits of the FireClass addressable digital technology.Auto Addressing Intelli-Zone On line Help function USB interface to upload the configuration and the easiness to configure the panel via integrated keypad are only some of the features that allow the installation and configuration of the FC501 in just a few simple steps.This 3 in 1 loop panel enables 3 circuits of devices to be connected to this single loop panel providing greater flexibility and simplifying the wiring process. Once the loop devices are wired the system can be auto addressed by a single click. The devices are automatically assigned to 3 zones according to the physical loop they are connected to the system is ready to protect the site. If the system configuration needs to be modified and the devices re-addressed or the zonesre-programmed the powerful Intelli-Zone feature significantly reduces the configuration time allowing the installer to perform test and programming at once. The configuration software is extraordinarily user friendly and provides a very nice graphic interface that displays all devices connected to the different zones. A battery and wire calculation tool is included in the software to help the installer in sizing up the system.A free graphic maps software based on a multilevel maps tree structure allows a remote real time visualization of any loop zone and point status and the simple remote user interface with control buttons reset silence evacuate allow users to manage the system from any location in the world. The FireClass FC501 control panel supports a total of 128 devices including the double and triple technology detectors and a plenty of modules and sounders benefiting of one of the widest ranges available in the market.Key Features3 in 1 LoopsUp to 400mA current dynamically shared across 3 loop circuitsTwo versions available 1.5 A or 2.5 A power supplyUp to 128 Addresses 32 ZonesEasy to programmeAuto AddressingAuto mapping with Intelli-Zone featureOut of the BoxOn Line Help functionUSB interface dual role HostDeviceMulti UsersMulti Installers Up to 2 Installers 8 UsersWalk test function4000 Event LogLoop break locationOn board PSTN communicatorOptional IP boardGSMGPRS as external moduleLCD display 160 CharactersUp to 4 repeatersUp to 4 Multifunction interfaces for printer simplified fire brigade panelsEvent transmission via PSTN and IPFront panel controls enabling text and configuration changesDisplays temperature CO level and smoke level at any pointAutomatic drift compensation

GBP 531.17

1

Fireclass FC501-H Triple Circuit Single Loop Panel with 2.5A PSU

Fireclass FC501-H Triple Circuit Single Loop Panel with 2.5A PSUFC501 is the newest FireClass addressable solution for small systems brought to you by Tyco Fire Protection Products. Conceived to be extremely easy to install and use the FC501 is an out of the box panel which offers the simplicity of a conventional system and the benefits of the FireClass addressable digital technology.Auto Addressing Intelli-Zone On line Help function USB interface to upload the configuration and the easiness to configure the panel via integrated keypad are only some of the features that allow the installation and configuration of the FC501 in just a few simple steps.This 3 in 1 loop panel enables 3 circuits of devices to be connected to this single loop panel providing greater flexibility and simplifying the wiring process. Once the loop devices are wired the system can be auto addressed by a single click. The devices are automatically assigned to 3 zones according to the physical loop they are connected to the system is ready to protect the site. If the system configuration needs to be modified and the devices re-addressed or the zonesre-programmed the powerful Intelli-Zone feature significantly reduces the configuration time allowing the installer to perform test and programming at once. The configuration software is extraordinarily user friendly and provides a very nice graphic interface that displays all devices connected to the different zones. A battery and wire calculation tool is included in the software to help the installer in sizing up the system.A free graphic maps software based on a multilevel maps tree structure allows a remote real time visualization of any loop zone and point status and the simple remote user interface with control buttons reset silence evacuate allow users to manage the system from any location in the world. The FireClass FC501 control panel supports a total of 128 devices including the double and triple technology detectors and a plenty of modules and sounders benefiting of one of the widest ranges available in the market.Key Features3 in 1 LoopsUp to 400mA current dynamically shared across 3 loop circuitsTwo versions available 1.5 A or 2.5 A power supplyUp to 128 Addresses 32 ZonesEasy to programmeAuto AddressingAuto mapping with Intelli-Zone featureOut of the BoxOn Line Help functionUSB interface dual role HostDeviceMulti UsersMulti Installers Up to 2 Installers 8 UsersWalk test function4000 Event LogLoop break locationOn board PSTN communicatorOptional IP boardGSMGPRS as external moduleLCD display 160 CharactersUp to 4 repeatersUp to 4 Multifunction interfaces for printer simplified fire brigade panelsEvent transmission via PSTN and IPFront panel controls enabling text and configuration changesDisplays temperature CO level and smoke level at any pointAutomatic drift compensation

GBP 501.42

1

Fireclass FC501-L Triple Circuit Single Loop Panel with 1.5A PSU

Fireclass FC501-L Triple Circuit Single Loop Panel with 1.5A PSUFC501 is the newest FireClass addressable solution for small systems brought to you by Tyco Fire Protection Products. Conceived to be extremely easy to install and use the FC501 is an out of the box panel which offers the simplicity of a conventional system and the benefits of the FireClass addressable digital technology.Auto Addressing Intelli-Zone On line Help function USB interface to upload the configuration and the easiness to configure the panel via integrated keypad are only some of the features that allow the installation and configuration of the FC501 in just a few simple steps.This 3 in 1 loop panel enables 3 circuits of devices to be connected to this single loop panel providing greater flexibility and simplifying the wiring process. Once the loop devices are wired the system can be auto addressed by a single click. The devices are automatically assigned to 3 zones according to the physical loop they are connected to the system is ready to protect the site. If the system configuration needs to be modified and the devices re-addressed or the zonesre-programmed the powerful Intelli-Zone feature significantly reduces the configuration time allowing the installer to perform test and programming at once. The configuration software is extraordinarily user friendly and provides a very nice graphic interface that displays all devices connected to the different zones. A battery and wire calculation tool is included in the software to help the installer in sizing up the system.A free graphic maps software based on a multilevel maps tree structure allows a remote real time visualization of any loop zone and point status and the simple remote user interface with control buttons reset silence evacuate allow users to manage the system from any location in the world. The FireClass FC501 control panel supports a total of 128 devices including the double and triple technology detectors and a plenty of modules and sounders benefiting of one of the widest ranges available in the market.Key Features3 in 1 LoopsUp to 400mA current dynamically shared across 3 loop circuitsTwo versions available 1.5 A or 2.5 A power supplyUp to 128 Addresses 32 ZonesEasy to programmeAuto AddressingAuto mapping with Intelli-Zone featureOut of the BoxOn Line Help functionUSB interface dual role HostDeviceMulti UsersMulti Installers Up to 2 Installers 8 UsersWalk test function4000 Event LogLoop break locationOn board PSTN communicatorOptional IP boardGSMGPRS as external moduleLCD display 160 CharactersUp to 4 repeatersUp to 4 Multifunction interfaces for printer simplified fire brigade panelsEvent transmission via PSTN and IPFront panel controls enabling text and configuration changesDisplays temperature CO level and smoke level at any pointAutomatic drift compensation

GBP 479.87

1

Fireclass FC503 3 Loop Panel 250 Points

Fireclass FC503 3 Loop Panel 250 PointsThe FC503 is the newest FireClass addressable solution for a wide range of applications and requirements. Conceived to be extremely easy to install and use the FC503 is an out of the box panel which offers the simplicity of a conventional system and the benefits of the FireClass addressable digital technology. Auto Addressing Intelli-Zone Online Help function USB interface to upload the configuration and the easiness to configure the panel via integrated keypad are only some of the features that allow the installation and configuration of the panels in just a few simple steps.The FC503 panel has 3 in 1 loops that can support up to 250 addressable devices and 32 zones. The split loop technology enables 3 circuits of devices to be connected to one single loop providing greater flexibility andsimplifying the wiring process. Once the loop devices are wired the system can be auto addressed by a single click. The devices are automatically assigned to 32 zones according to the physical loop they are connected to the system is ready to protect the site. If the system configuration needs to be modified and the devices re-addressed or the zones re-programmed the powerful Intelli-Zone feature significantly reduces the configuration time allowing the installer to perform test and programming at once. The configuration software is extremely user friendly and provides a very nice graphic interface that displays all devices connected to the different zones.A battery and wire calculation tool is included in the software to help the installer in sizing up the system. A free graphic maps software based on a multilevel maps tree structure allows a remote real time visualization of any loop zone and point statusand the simple remote user interface with control buttons reset silence evacuate allow users to manage the system from any location in the world. This new FireClass FC503 control panel supports up to 250 devices including the double and triple technology detectors and a plenty of modules and sounders benefiting of one of the widest ranges available in the market.Key Features3 in 1 loopsUp to 800mA current dynamically shared across 3 loop circuitsAuto mapping with Intelli-Zone featureOnline Help functionUSB interface dual role HostDeviceMulti users and multi installers Up to 2 installers 8 usersWalk test function4000 Event LogLoop break locationOn board PSTN communicatorGSMGPRS as external moduleUp to 8 repeaters and up to 7 FC500 Series panel clientsEvent transmission through PSTN and IPAutomatic drift compensationFast and simple system configuration also offlineTransferable user databaseDevice graphic displayedBattery and wiring calculationCustomizable cables databaseVisualization of all the devices assigned to a single zoneRemote real time visualization of control panel loop and zone status and so on.Easy remote user interface with control buttons reset silence evacuateMultilevel map based on a tree structureAccess device data from any pages of the mapConfiguration downloadable to USB memory stickCapability to print zone label sheet for front panel customization

GBP 722.82

1

Fireclass FC506 6 Loop Panel 500 Points

Fireclass FC506 6 Loop Panel 500 PointsThe FC506is the newest FireClass addressable solution for a wide range of applications and requirements. Conceived to be extremely easy to install and use the FC506is an out of the box panel which offers thesimplicity of a conventional system and the benefits of the FireClass addressable digital technology. Auto Addressing Intelli-Zone Online Help function USB interface to upload the configuration and the easiness to configure the panel via integrated keypad are only some of the features that allow the installation and configuration of the panels in just a few simple steps.The FC506 auto-addressing panel has 6 in 2 loops that can support up to 500 addressable devices and 32 zones. The split loop technology enables 3 circuits of devices to be connected to one single loop providing greater flexibility andsimplifying the wiring process. Once the loop devices are wired the system can be auto addressed by a single click. The devices are automatically assigned to 32 zones according to the physical loop they are connected to the system is ready to protect the site. If the system configuration needs to be modified and the devices re-addressed or the zones re-programmed the powerful Intelli-Zone feature significantly reduces the configuration time allowing the installer to perform test and programming at once. The configuration software is extremely user friendly and provides a very nice graphic interface that displays all devices connected to the different zones.A battery and wire calculation tool is included in the software to help the installer in sizing up the system. A free graphic maps software based on a multilevel maps tree structure allows a remote real time visualization of any loop zone and point statusand the simple remote user interface with control buttons reset silence evacuate allow users to manage the system from any location in the world. This new FireClass FC506control panel supports up to 500 devices including the double and triple technology detectors and a plenty of modules and sounders benefiting of one of the widest ranges available in the market.Key Features 6 in 2 loopsUp to 800mA current dynamically shared across 3 loop circuitsAuto mapping with Intelli-Zone featureOnline Help functionUSB interface dual role HostDeviceMulti users and multi installers Up to 2 installers 8 usersWalk test function4000 Event LogLoop break locationOn board PSTN communicatorGSMGPRS as external moduleUp to 8 repeaters and up to 7 FC500 Series panel clientsEvent transmission through PSTN and IPAutomatic drift compensationFast and simple system configuration also offlineTransferable user databaseDevice graphic displayedBattery and wiring calculationCustomizable cables databaseVisualization of all the devices assigned to a single zoneRemote real time visualization of control panel loop and zone status and so on.Easy remote user interface with control buttons reset silence evacuateMultilevel map based on a tree structureAccess device data from any pages of the mapConfiguration downloadable to USB memory stickCapability to print zone label sheet for front panel customization

GBP 1073.92

1

Fireclass 516.300.411FC FV411F Triple Infrared Flame Detector

Fireclass 516.300.411FC FV411F Triple Infrared Flame DetectorThe FV400 series uses Triple IR Solar Blind technology for flame detection. This provides a reliable and cost-effective solution in standard flame detection applications especially where there is a single hazard in the field of view. The FV400 detectors use Triple IR Solar Blind sensing technology and flame detection algorithms to provide high performance sensing capabilities for hydrocarbon fires. This includes the ability to reliably sense flames through high densities of solvent vapours and black smoke increasing the probability of early detection with consistent high sensitivity to flame throughout the whole field of view.They also ensure consistent detection of many different types of hydrocarbon fuels from alcohol to aviation fuel. Multiple interfaces are provided with the option of an integral CCTV camera to provide a visual means of operator verification.Key FeaturesTriple IR solar blind sensing technologyMultiple Field InterfacesDetection range Up to 65 m for 0.1 m2n-heptanepan fireAutomatic optical path monitoringIntegral flame simulation and remote walk test help reduce the ongoing life time cost of the flame detection installationVideo verification via the integrated optional flameproof cameraFast and reliable high sensitivity flame detection with high false alarm immunity throughout a wide field of viewConsistent detection of different sizes of flames from a wide range of hydrocarbon fuels such as wood cellulose alcohol to aviation fuel JP4 and JP5Simplifies alarm handling for remote control situationsExcellent false alarm immunity. Proven to be immune to common radiation sources continuous or modulated such as halogen lamps lightning X-rays sparks corona welding heaters etcUnaffected by sunlight completely solar blind

GBP 2862.13

1

Fireclass 516.300.413FC FV413F Triple Infrared Flame Detector with NTSC Camera

Fireclass 516.300.413FC FV413F Triple Infrared Flame Detector with NTSC CameraThe FV300 range uses Infra-Red Array based sensing technology to provide the ultimate programmable flame detector. An array of 256 infra-red sensors plus two optical channels view the protected area. Powerful algorithms running on a Digital Signal Processor DSP are tuned to the characteristics of a fire and analyse the signals from these channels to quickly and reliably identify fires. A key advantage of using an array is that the detector can accurately identify the location of the flame within the field of view.The location information is used to overlay a marker on the live video output to highlight the fire location. The user can quickly see the location of one fire or multiple fires and decide on the appropriate action. The location information is also available on the field network interface. User defined areas within the field of view can be masked and un-masked dynamically to improve reliability and maintain maximum coverage at all times.The detector can be supplied with an optional integral colour video camera to display a live image of the field of view this is in addition to the alarm location and status information which is available as standard on the video output.Key FeaturesAdvanced array-based detectorPowerful signal processing on DSP with algorithms to give reliable flame detectionDetection range Over 50 m for 0.1 m2n-heptane panfireField of view 90 horizontal 85 vertical with full range maintainedHigh immunity to false alarmsSolar blindMasking of areas in field of viewAutomatic optical path monitoringAdvanced self-test and service featuresBuilt-in video camera option View protected area with alarm location and status overlayIEC 61508 Approved SIL2

GBP 4983.64

1

Fireclass 557.200.710FC FC64 DC Repeater 64 Zones

Fireclass 557.200.710FC FC64 DC Repeater 64 ZonesThe FC64RD Addressable fire alarm repeater panel is fully functioning and is compatible with the FC32 and FC64 range of fire alarm panels.Fire detection in big buildings can be extremely difficult. The FC64RD Compact addressable fire alarm zone repeater panel ensures that getting in to a fire alarm system and being able to interrogate the fire panel never needs to be difficult again.In an office building fire detection control panels may be located in reception but require numerous fire repeater panels around the building or on different floors.In schools the main fire alarm panel may be in the office but repeater panels are required around the school or at a security guard or caretakers house.The 24v FireClass Fire Alarm repeater panels also come in at just 4kg and provide a super compact repeater which is both aesthetically pleasing as well as retaining all the features and functions of the FireClass FC32 and FC64 addressable fire alarm control panels.The FireClass addressable repeater panel unit shows the same information as the main fire alarm control panel retains the full functionality of the main addressable fire alarm control panel including the ability to dial in to any other panel on the network to view and configure any point on the panel including RBus points.The FireClass repeater panel is almost half the depth and width of the larger repeater panels and also 22 shorter in height.Key FeaturesH x W x D 370 x 254 x 84 mmUp to 1000 addresses available on fire alarm control panel640 Character DisplayPermanently displays system statusDisplays temperature Carbon Monoxide CO level and smoke level at point in fire alarmViewing 3000 event logManual and Automatic walk test and reporting functionsAutomatic battery testFire Detector service functionsFront control panel controls enabling text and configuration changes Up to 24 panels networkableChoice of up to 5 fully functional repeaters with a maximum of 7 per panelWorks in conjunction with our Fireclass Addressable 64 Zone Control Panel

GBP 948.79

1

Brand

Merchant

Price (EUR)