376 results (0,19951 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Guhring 496 1.70mm HSS-E Int M/C Chucking Reamer

Guhring 496 1.70mm HSS-E Int M/C Chucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 3.72MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 3.72MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 8.92MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.92MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 2.11MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 2.11MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.49
1

Guhring 496 3.86MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 3.86MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 2.76MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 2.76MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.99
1

Guhring 496 2.40MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 2.40MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.49
1

Guhring 496 6.81MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 6.81MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 10.58MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 10.58MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 41.99
1

Guhring 496 9.29MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 9.29MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 1.11MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 1.11MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 29.99
1

Guhring 496 4.63MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 4.63MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 23.99
1

Guhring 496 9.69MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 9.69MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 8.94MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.94MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 9.87MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 9.87MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 7.61MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 7.61MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 8.31MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.31MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 5.43MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 5.43MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 10.92MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 10.92MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 41.99
1

Guhring 496 5.37MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 5.37MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 6.82MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 6.82MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 0.99mm HSS-E Int M/Cchucking Reamer

Guhring 496 0.99mm HSS-E Int M/Cchucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 29.99
1

Guhring 496 8.53MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.53MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 9.24MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 9.24MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 10.54MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 10.54MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 41.99
1