423 results (0,17131 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Guhring 496 2.76MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 2.76MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 23.99
1

Guhring 496 1.05mm HSS-E Int M/C Chucking Reamer

Guhring 496 1.05mm HSS-E Int M/C Chucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.99
1

Guhring 496 8.26MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.26MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 10.78MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 10.78MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 41.99
1

Guhring 496 11.46MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 11.46MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 44.99
1

Guhring 496 10.41MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 10.41MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 41.99
1

Guhring 496 8.72MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.72MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 1.14mm HSS-E Int M/C Chucking Reamer

Guhring 496 1.14mm HSS-E Int M/C Chucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.99
1

Guhring 496 3.93MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 3.93MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 7.84MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 7.84MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 1.59mm HSS-E Int M/C Chucking Reamer

Guhring 496 1.59mm HSS-E Int M/C Chucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.99
1

Guhring 496 2.11MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 2.11MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.49
1

Guhring 496 11.24MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 11.24MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 44.99
1

Guhring 496 9.27MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 9.27MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 1.70mm HSS-E Int M/C Chucking Reamer

Guhring 496 1.70mm HSS-E Int M/C Chucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 8.92MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.92MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 11.49MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 11.49MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 44.99
1

Guhring 496 7.41MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 7.41MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 6.69MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 6.69MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 3.86MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 3.86MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 22.99
1

Guhring 496 11.79MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 11.79MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 45.99
1

Guhring 496 1.21mm HSS-E Int M/Cchucking Reamer

Guhring 496 1.21mm HSS-E Int M/Cchucking Reamer

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 24.99
1

Guhring 496 3.72MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 3.72MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 25.99
1

Guhring 496 8.52MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 8.52MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 31.99
1

Guhring 496 1.11MM Chucking Reamer Machine HSS-E Intermediate

Guhring 496 1.11MM Chucking Reamer Machine HSS-E Intermediate

No. 496 Available in diameters ranging from 2mm to 12mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 & DIN 2172 section 1. Shank diameter = cutting diameter - 0.025mm. 2.00 ~ 2.65/2.66 ~ 10.00 H9. Diameter Tolerances (to H7) Up to 5.5mm: + 0.004mm - 0.000mm Above 5.5mm: + 0.005mm - 0.000mm. Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

GBP 27.99
1