ProfitSpring | B2B PPC Agency

Haes ESEN-R-12MAR 12 Zone Conventional Esento MED Marine Approved Repeater Panel

Haes ESEN-R-12MAR 12 Zone Conventional Esento MED Marine Approved Repeater PanelThe Esento Marine 12 way repeater panels have the same easy to use controls and indications as the main control panel. The repeaters are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only.The main circuit board has 2 switch ve inputs which can be used to sound or pulse the alarms. These inputs can also be re-programmed for use as PSU fault inputs. The internal comms PCB has 6 switch ve programmable outputs. The repeaters are supplied with a 1.25 amp internal power supply module. This module complies with the requirements of EN54-4 1988 and provides temperature compensated battery management charging.Key Features12 zonal fire and fault indicationsActivate controls via keyswitch or code entry1.25 Amp switch mode power supply Nom 27V DCClass change IPAlert IP6 programmable switched -ve outputsTest mode with or without soundersDisable zones sounder OPs aux OPs delays

GBP 365.94

1

Haes ASP-R-12 AlarmSense PLUS 12 Way Repeater Panel

Haes ASP-R-12 AlarmSense PLUS 12 Way Repeater PanelA 12 zone fully functional or passive fire alarm repeater panel suitable for the AlarmSense PLUS panel range not suitable for ALS panels.The AlarmSense PLUS 12 way repeater panels have the same easy to use controls and indications as the main control panel.The repeaters are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only.The main circuit board has 2 switch ve inputs which can be used to sound or pulse the alarms. These inputs can also be re-programmed for use as PSU fault inputs.The internal comms PCB has 6 switch ve programmable outputs.The repeaters are supplied with a 1.25 amp internal power supply module.This module complies with the requirements of EN54-4 1988 and provides temperature compensated battery management chargingKey Features12 zonal fire and fault indicationsActivate controls via key switch or code entry1.25 Amp switch mode power supply Nom 27V DCClass change IPAlert IP6 programmable switched -ve outputsTest mode with or without soundersDisable zones sounder OPs aux OPs delays

GBP 372.60

1

Haes HS-5010 Remote Display Terminal with Standard Network Interface

Haes HS-5010 Remote Display Terminal with Standard Network InterfaceThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 657.64

1

Haes HS-5020 Remote Control Terminal with Standard Network Interface

Haes HS-5020 Remote Control Terminal with Standard Network InterfaceThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 812.36

1

Haes HS-5010-FT Remote Display Terminal with Fault Tolerant Network

Haes HS-5010-FT Remote Display Terminal with Fault Tolerant NetworkThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 1190.28

1

Haes HS-5020-FT Remote Control Terminal with Fault Tolerant Network

Haes HS-5020-FT Remote Control Terminal with Fault Tolerant NetworkThe HS-5010 is a Remote Display Terminal RDT while the HS-5020 is a fully functional Remote Control Terminal RCT. The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series fire panels and are based upon the same advanced flash based microprocessor technology. All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enable disable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesDisplay only or full control unitsStandard network or fault tolerant versions3 year warranty as standardLarge graphical LCD user interfaceSmall compactProgrammable switch inputsDisableenable optionsFully on site programmable

GBP 1339.04

1

Haes 2-12 Zone Fully Functional or Passive Repeater Panel XLEN-R-12

Haes 2-12 Zone Fully Functional or Passive Repeater Panel XLEN-R-12The Excel-EN repeater panels have the same easy to use controls and indications as the main control panel but mounted in a smaller cabinet. The repeaters are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only. Excel-EN panels can support up to 8 repeater panels.Repeater panels are designed to be wired in a fault tolerant fail safe loop configuration from comms A to B and back to the main panel again. This enables repeater panels to still work if there is a break in the cables. If replacing an older system where the existing cabling cannot be configured in a loop as above it is possible to re-programme the panel back to legacy radial circuit comms monitoring. This then allows any topology of comms cabling to be utilised.The main circuit board has 2 switch ve inputs which can be used to sound or pulse the alarms. These inputs can also be re-programmed for use as PSU fault inputs. The internal comms PCB has 6 switch ve programmable outputs.Key Features12 zonal fire fault indications3 year warranty as standardSimple colour coded buttons for controlsIntegral 1 amp switch mode PSUClass change alert inputsProgrammable outputsTest mode disablement functionsFully functional or passiveSpace for up to 3.2Ah batteriesKey-switch or code entry for activation of controls

GBP 370.74

1

Haes LCD Fully Functional Remote Display Unit XL-RDU

Haes LCD Fully Functional Remote Display Unit XL-RDUThe XL-RDU 32 way LCD remote display repeater panels have the same easy to use controls and indications as the main control panels with the addition of a 4 line x 40 character backlit LCD display. The remote display units are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only. Up to 8 repeater panels can be supported on a system.The display text is fully editable for system panel and zone names plus up to 40 characters for installationservice company details. Other local options include setting the real time clock editing the user access code and lowering or muting the internal buzzer. All programming can be done using the on board controls and user menu or via the PC config software supplied. The main circuit board has 2 switch ve outputs which provide fire and fault signals. Inputs are available for use as PSU fault inputs. An input for a remote key-switch is also provided.Controls are enabled via a 4 digit code entry. The user code can be changed in the programming settings. An eight button keypad is used to control the system and allow access to the function options. The remote display unit is housed in a robust sheet steel enclosure suitable for wall mounting. Cable entry is via 20mm knockouts located at the top and rear of the cabinet. A nominal 28v dc supply is required to power the remote display units which can be obtained from the control panel or remote power supply unit.Key Features4 x 40 character backlit LCD displaySimple colour coded buttons for controlsProgrammable display textRemote key switch inputFull system controlTest mode disablement functionsFully functional or passiveUp to 8 units supported on a systemPC programming software

GBP 499.37

1

Brand

Merchant

Price (EUR)