259 results (0,14669 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Hochiki Remote Indicator with Fire Text REM-EFIRETEXT

Hochiki Remote Indicator with Fire Text REM-EFIRETEXT

Hochiki Remote Indicator with Fire Text REM-EFIRETEXTThe REM-E Remote Indicator is designed for fire detection systems requiring local indication of an individual or group of fire detectors in alarm utilising an LED with a wide area of illumination and high onoff contrast.The unit comes with a single gang purpose-designed back box and operates with many types of conventional and analogue addressable fire detectors frequently eliminating the requirements to stock two types of indicator.The device can also be used for other applications requiring a local visual indicator such as process control security and shut down operations.

GBP 10.04
1

Hochiki Dual Sounder Controller with SCI CHQ-DSC2SCI

Hochiki Dual Sounder Controller with SCI CHQ-DSC2SCI

Hochiki CHQ-DSC2SCI Dual Sounder Controller with SCICHQ-DSC2SCI is a Dual Sounder Controller which has been designed to provide two sounder outputs that can be driven separately with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.The unit utilises simple DIL switches for reliable addressing. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DSC2SCI increases the IP rating to IP65.Key FeaturesSingle loop addressTwo independent sounder circuitsEach circuit fully monitored for open and short circuit faultsEach alarm circuit fused at 1 AAuxiliary monitored inputOutputs are synchronised and can be driven continuously or intermittently24 V dc auxiliary power requiredDIN rail version availableBoth models feature an integral short-circuit isolatorBoth models approved by LPCB VdS

GBP 97.09
1

Hochiki Plant Control Module with SCI CHQ-PCMSCI

Hochiki Plant Control Module with SCI CHQ-PCMSCI

Hochiki CHQ-PCMSCI Plant Control Module with SCIThe CHQ-PCMSCI is a loop powered inputoutput module with four independent change-over relay outputs and four monitored inputs. The outputs feature NO and NC volt free contacts and can be driven separately under the control of the fire alarm panel to be used for the control of devices such as dampers or for plant and equipment shutdown. The four inputs are provided for local fire and fault monitoring and these are fully monitored for open and short circuit which if required can be enabled or disabled in pairs using a two-way DIL switch.The unit is also available in a DIN Rail mountable enclosure CHQ-PCMDINSCI. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-PCMSCI increases the IP rating to IP65. When using heavy cables we recommend the use of the SMB-1 Module Enclosure in conjunction with the SMB-ADAPTOR plate.Key FeaturesSingle loop addressLoop powered4 change-over relay outputs4 independent inputs for monitoring of volt-free contactsEach input can be configured to monitor either Normally Open or Normally Closed contactsDIN rail version availableBoth models feature an integral short-circuit isolatorApproved by LPCBPlease Note The state of the relay contacts will be indeterminate until the unit is powered.

GBP 124.74
1

Hochiki YBO-BSB2BLKRL Base Sounder Beacon - Black Case with Red LEDs

Hochiki YBO-BSB2BLKRL Base Sounder Beacon - Black Case with Red LEDs

Hochiki YBO-BSB2BLKRL Base Sounder Beacon - Black Case with Red LEDsModel YBO-BSB2BLKRL is an O rated EN54-23 compliant addressable loop powered base sounder with integral beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption.The unit is designed to fit to the standard base YBN-R3BLK and can be fitted with any of the ESP range of black sensors.The sounder is Ingress Protection rated to IP21 and for internal use only.Key FeaturesO rated beacon to EN54-23Single loop address - addressed via the TCH-B200 Hand Held ProgrammerVariable sound output 50 98 dBA 2 dBA output at 1 metreSounder and beacon can operate independently0.5 or 1Hz flash frequencyFits Hochiki standard or isolator base and supports ESP sensors addressable beacons and addressable remote indicator51 user-selectable tones all tones EN54-3 compatibleAuto-shutdown feature prevents noise-pollutionAvailable with red or white LEDsAvailable with ivory white or black case

GBP 86.06
1

Hochiki YBO-BSB2BLKWL Base Sounder Beacon - Black Case with White LEDs

Hochiki YBO-BSB2BLKWL Base Sounder Beacon - Black Case with White LEDs

Hochiki YBO-BSB2BLKWL Base Sounder Beacon - Black Case with White LEDsModel YBO-BSB2BLKWL is an O rated EN54-23 compliant addressable loop powered base sounder with integral beacon innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dBA 2 dBA with low current consumption.The unit is designed to fit to the standard base YBN-R3BLK and can be fitted with any of the ESP range of black sensors.The sounder is Ingress Protection rated to IP21 and for internal use only.Key FeaturesO rated beacon to EN54-23Single loop address - addressed via the TCH-B200 Hand Held ProgrammerVariable sound output 50 98 dBA 2 dBA output at 1 metreSounder and beacon can operate independently 10.5 or 1Hz flash frequencyFits Hochiki standard or isolator base and supports ESP sensors addressable beacons and addressable remote indicator51 user-selectable tones all tones EN54-3 compatibleAuto-shutdown feature prevents noise-pollution 1Available with red or white LEDsAvailable with ivory white or black case

GBP 71.30
1

Hochiki CHQ-DRC2MSCI Marine Approved Dual Relay Controller With SCI

Hochiki CHQ-DRC2MSCI Marine Approved Dual Relay Controller With SCI

Hochiki CHQ-DRC2MSCI Marine Approved Dual Relay Controller With SCIThe CHQ-DRC2MSCI is a Marine Approved Dual Relay Controller module designed to provide two general-purpose relay outputs each output can be driven separately for control of such devices as dampers or for control of plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.The unit also features an integral short-circuit isolator. The CHQ-DRC2MSCI utilises simple DIL switches for reliable addressing. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DRC2MSCI increases the IP rating to IP65.Key FeaturesApproved to MED by DNVLoop powered with single loop addressProvides 2 Independently controlled changeover relaysRelays contact rated at 30 VDC at 1 AAuxiliary monitored inputFeatures an integral SCICan be used with CHQ-BACKBOX to comply with BS 7671SIL2 and Railway Approved variants available

GBP 83.29
1

Hochiki Dual Input Module with SCI CHQ-DIM2SCI

Hochiki Dual Input Module with SCI CHQ-DIM2SCI

Hochiki CHQ-DIM2SCI Dual Input Module with SCIModel CHQ-DIM2SCI is a Dual Input Module designed to interface to a variety of inputs such as door contacts sprinkler flowdoor switches and plant equipment. Also available as a DIN Rail mountable version both models feature an integral short-circuit isolator.A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DIM2SCI increases the IP rating to IP65.Key FeaturesSingle Loop AddressLoop Powered2 Independent Inputs for Monitoring of Volt Free ContactsEach Input can be Configured to Monitor either Normally Open or Normally Closed contactsDIN-Rail version availableBoth models feature an integral SCIBoth models approved by LPCB

GBP 53.92
1

Hochiki ALN-ENSCI Analogue Photoelectric Smoke Sensor with SCI

Hochiki ALN-ENSCI Analogue Photoelectric Smoke Sensor with SCI

Hochiki ALN-ENSCI Analogue Photoelectric Smoke Sensor with SCIModel ALN-ENSCI is a Photoelectric Smoke Sensor with SCI which is fully compatible with Hochikis ESP Analogue Addressable Protocol. The ALN-ENSCI incorporates Hochikis newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms. The ALN-ENSCI smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance chamberTwin LEDs allow 360 viewing green when polling amber when isolating red in fireLocking mechanism sensor to baseVariable sensitivityElectronically addressedPulsingnon-pulsing controlled from panel1

GBP 43.58
1

Hochiki Marine Dual Sounder Controller with SCI CHQ-DSC2MSCI

Hochiki Marine Dual Sounder Controller with SCI CHQ-DSC2MSCI

Hochiki CHQ-DSC2MSCI Marine Dual Sounder Controller with SCIThe CHQ-DSC2MSCI is a Marine Approved Dual Sounder Controller which has been designed to provide two sounder outputs that can be driven separately with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.The unit utilises simple DIL switches for reliable addressing. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DSC2MSCI increases the IP rating to IP65.Key FeaturesSingle loop addressEach alarm circuit fused at 1 ampTwo independent sounder circuits each fully monitored for open and short circuit faultsAuxiliary monitored inputOutputs can be driven continuously or synchronised pulsed sounder driveSmart-Fix housing system for flexibilityFeatures an integral SCIApproved to MED by GLGL Type approvalApproved by LPCB

GBP 111.84
1

Hochiki Dual Zone Monitor with SCI CHQ-DZMSCI

Hochiki Dual Zone Monitor with SCI CHQ-DZMSCI

Hochiki CHQ-DZMSCI Dual Zone Monitor with SCIModel CHQ-DZMSCI is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors 30 on each zone to be interfaced to Hochikis ESP analogue addressable system. The unit also features a Schottky Diode line continuity option when used in conjunction with the optional LCMU.Full monitoring against malfunction or disconnection together with a self-test feature through the ESP protocol ensure the integrity of the CHQ-DZMSCI at all times. The CHQ-DZMSCI utilises simple DIL switches for reliable addressing. It is available as an OEM version as illustrated above and also as a DIN Rail mountable module CHQ-DZMDINSCI. Both models feature an integral short-circuit isolator.Please note When Resistive EOL option is chosen the conventional zone on the CHQ-DZMSCI does not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressSupports two independent zones of conventional detectorsBoth zones fully monitored for shortopen circuitRequires an auxiliary 24 V dc supplyDIN rail version availableBoth models feature an integral short-circuit isolatorApproved by LPCB

GBP 121.22
1

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCI

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCI

Hochiki ATJ-ENSCI Analogue Multi-Heat Sensor with SCIThe ATJ-ENSCI is a Multi-Heat Sensor with SCI which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ATJ-ENSCI incorporates a Variable Temperature heat element and a Rate of Rise heat element both of which are controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel pulsingnon-pulsing.Key FeaturesUser selectable modesIncorporates Fixed Temperature and Rate of Rise Heat elementsTwin LEDs allow 360 viewing green when polling amber when isolating red in firePulsingnon-pulsing controlled from panelElectronically AddressedOperating Voltage 17 41 VDCAlarm Current controlled by CIE 9.1 mA excluding remote indicatorCurrent in Short Circuit 13.5mATransmission Method Digital Communications Using ESPOperating Temperature Range -10 C to 50 CCompatible Bases YBV-R4

GBP 43.58
1

Hochiki Marine Single Zone Monitor with SCI CHQ-SZM2MSCI

Hochiki Marine Single Zone Monitor with SCI CHQ-SZM2MSCI

Hochiki CHQ-SZM2MSCI Marine Single Zone Monitor with SCIThe CHQ-SZM2MSCI is a Marine Approved Single Zone Monitor designed to allow up to 6 marine approved conventional detectors to be interfaced to Hochikis ESP analogue addressable system. The unit also features an integral short-circuit isolator.The CHQ-SZM2MSCI utilises simple DIL switches for reliable addressing. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-SZM2MSCI increases the IP rating to IP65.Key FeaturesLoop Powered with Single Loop AddressUp to 6 Conventional DetectorsRemote LED OutputFully Monitored for Short and Open Circuit FaultsSmart-Fix Housing System for flexibilityFeatures an integral SCIApproved to MED by GLGL Type approvalApproved by LPCBPlease Note The conventional zone on the CHQ-SZM2MSCI does not support any line continuity options if Call Points are being interfaced they should be wired at the beginning of the zone.

GBP 68.87
1

Hochiki CHQ-DIM2MSCI Marine Dual Input Module with SCI

Hochiki CHQ-DIM2MSCI Marine Dual Input Module with SCI

Hochiki CHQ-DIM2MSCI Marine Dual Input Module with SCIModel CHQ-DIM2MSCI is a Marine Approved Dual Input Module designed to interface to a variety of inputs such as door contacts sprinkler flowdoor switches and plant equipment. Also features an integral short-circuit isolator.A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DIM2MSCI increases the IP rating to IP65.Key FeaturesSingle Loop AddressLoop Powered2 Independent Inputs for Monitoring of Volt Free ContactsEach Input can be Configured to Monitor either Normally Open or Normally Closed contactsSmart-Fix Housing System for flexibilityFeatures an integral SCIApproved to MED by GLGL Type ApprovalApproved by LPCB

GBP 62.12
1

Hochiki Dual Relay Controller with SCI CHQ-DRC2SCI

Hochiki Dual Relay Controller with SCI CHQ-DRC2SCI

Hochiki CHQ-DRC2SCI Dual Relay Controller with SCIModel CHQ-DRC2SCI is a Dual Relay Controller designed to provide two general-purpose relay outputs each output can be driven separately for control of such devices as dampers or for control of plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.The unit is also available as a DIN Rail mountable version both models feature an integral short-circuit isolator. The CHQ-DRC2SCI utilises simple DIL switches for reliable addressing. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DRC2SCI increases the IP rating to IP65.Key FeaturesLoop poweredSingle loop address2 Independently controlled changeover relaysRelays contact rated at 30 V dc at 1 AAuxiliary monitored inputDIN-Rail version available hereBoth models feature an integral short-circuit isolatorBoth models approved by LPCB

GBP 67.28
1

Hochiki Single Zone Monitor with SCI CHQ-SZM2SCI

Hochiki Single Zone Monitor with SCI CHQ-SZM2SCI

Hochiki CHQ-SZM2SCI Single Zone Monitor with SCIA Single Zone Monitor designed to allow up to 6 conventional detectors to be interfaced to Hochikis analogue addressable system. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.Key FeaturesLoop PoweredUp To 6 Conventional DetectorsSingle Loop AddressRemote LED OutputFully Monitored for Short and Open Circuit FaultsDIN Rail Version AvailableBoth Models Feature an Integral Short Circuit Isolator

GBP 59.81
1

Hochiki Addressable Marine Call Point with SCI HCP-EMSCI

Hochiki Addressable Marine Call Point with SCI HCP-EMSCI

Hochiki HCP-EMSCI Addressable Marine Call Point with SCIThe HCP-EMSCI is a Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing1 for communications polling and is continuously lit when the unit is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high-level ESP interrupt. A built-in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required sold separately. An optional glass element is also available.Key FeaturesApproved to MED by GLSIL Level 2 approved variant availableIdeal for use in oil and gas environmentsFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B200 Hand Held ProgrammerSurface or flush mounting if surface mounting requires SR MOUNTING BOX sold separatelyLPCB Approved to EN54

GBP 44.60
1

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67Model HCP-WSCI is a weatherproof Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-WSCI is operated in these two states the LED will show red.The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerSurface mountedIP67 ratedLPCB approved to EN54Please Note the unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.

GBP 135.91
1

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCI

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCI

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCIThe HCP-WMSCI is a weatherproof Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing 1 for communications polling and is continuously lit when the HCP-WMSCI is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B200 Hand Held ProgrammerSurface mountedIP67 ratedLPCB approved to EN54GL and MED Type approval

GBP 162.67
1

Hochiki Dual Zone Monitor DIN Module with SCI CHQ-DZMDINSCI

Hochiki Dual Zone Monitor DIN Module with SCI CHQ-DZMDINSCI

Hochiki CHQ-DZMDINSCI Dual Zone Monitor DIN Module with SCIModel CHQ-DZMDINSCI is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors 30 on each zone to be interfaced to Hochikis ESP analogue addressable system. The unit also features a Schottky Diode line continuity option when used inconjunction with the optional LCMU.Full monitoring against malfunction or disconnection together with a self-test feature through the ESP protocol ensure the integrity of the CHQ-DZMDINSCI at all times. The unit utilises simple DIL switches for reliable addressing. It is alsoavailableas a boxedmodule CHQ-DZMSCI. Both models feature an integral short-circuit isolator.NOTE When Resistive EOL option is chosen the conventional zone on the CHQ-DZMDINSCI does not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressSupports two independent zones of conventional detectorsBoth zones fully monitored for shortopen circuitRequires an auxiliary 24 V dc supplyAlso available as a boxed moduleBoth models feature an integral short-circuit isolatorApproved by LPCB

GBP 147.30
1