ProfitSpring | B2B PPC Agency

Hochiki FIREscape Input Output Unit EL-IO

Hochiki FIREscape Input Output Unit EL-IOEL-IO is an IO unit which is connected to a line of the EL-2 Emergency Light Control Panel from which it receives its power. The unit links test switches and phase monitors to the FIrescape system.Key Features4 inputs- can be configured as opening or closing2 outputs- can be configured as NO or NCDimensions110 x 110 x 35 mm

GBP 149.64

1

Hochiki Ekho EK-WL8-SK Hybrid Wireless Survey Kit

Hochiki EkhoEK-WL8-SK Hybrid Wireless Survey KitThe EK-WL8-SK Ekho Test Kit consists of a portable wireless translator a wireless smoke sensor and a keypad.The keypad displays the wireless communication signals between the sensor and the translator module enabling you to design a wireless system successfully.Key FeaturesRobust carry caseEasy to use training is required before purchaseAllows for surveying potential hybrid wireless installationsPlease note Power supply not included.

GBP 880.45

1

Hochiki HCP-WYSCI Yellow Addressable Weatherprooof SCI Call Point

Hochiki HCP-WYSCI Yellow Addressable Weatherprooof SCI Call PointThe Hochiki HCP-WYSCI is a weatherproof yellow Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol.The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing 1 for communications polling and is continuously lit when the HCP-WYSCI is operated. In these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt.A built-in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside.Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standardAddressed with TCH-B200 Hand Held ProgrammerSurface mountedIP67 rated

GBP 138.34

1

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCI

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCIThe HCP-WMSCI is a weatherproof Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing 1 for communications polling and is continuously lit when the HCP-WMSCI is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B200 Hand Held ProgrammerSurface mountedIP67 ratedLPCB approved to EN54GL and MED Type approval

GBP 162.67

1

Hochiki Addressable Call Point Yellow HCP-EYSCI

Hochiki HCP-EY Addressable Call Point YellowModel HCP-EY is a Manual Call Point which is fully compatible with Hochikis ESP analogue addressable protocol.The HCP-EY incorporates a red LED mounted on the front cover which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-EY is operated.The unit is operated by pressing the EN54 compliant non-frangible plastic element and once operated produces a high level ESP interrupt allowing the control panel to respond very quickly. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required sold separately.Key FeaturesFast responseStatus LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerSurface or flush mounting if surface mounting requires SR MOUNTING BOX sold separatelyLPCB Approved to EN54

GBP 56.62

1

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67Model HCP-WSCI is a weatherproof Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-WSCI is operated in these two states the LED will show red.The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerSurface mountedIP67 ratedLPCB approved to EN54Please Note the unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.

GBP 135.91

1

Hochiki Ekho EK-WL8-H Hybrid Wireless Heat Sensor

Hochiki Ekho EK-WL8-H Hybrid Wireless Heat SensorThe EK-WL8-H is a wireless A1R heat sensor. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor is designed for installations where smoke detection technology is not suitable. The well- proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-5 and 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modules

GBP 117.59

1

Hochiki Addressable Marine Call Point with SCI HCP-EMSCI

Hochiki HCP-EMSCI Addressable Marine Call Point with SCIThe HCP-EMSCI is a Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing1 for communications polling and is continuously lit when the unit is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high-level ESP interrupt. A built-in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required sold separately. An optional glass element is also available.Key FeaturesApproved to MED by GLSIL Level 2 approved variant availableIdeal for use in oil and gas environmentsFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B200 Hand Held ProgrammerSurface or flush mounting if surface mounting requires SR MOUNTING BOX sold separatelyLPCB Approved to EN54

GBP 44.60

1

Hochiki EK-WL8-HS Ekho Heat Sensor cw Sounder

Hochiki EK-WL8-HS Ekho Heat Sensor cw SounderThe EK-WL8-HS is a wireless A1R heat sensor which comes with a sounder. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor is designed for installations where smoke detection technology is not suitable. The well- proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-5 and 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modulesComes with sounder

GBP 200.35

1

Hochiki Ekho EK-WL8-O Hybrid Wireless Optical Smoke Sensor

Hochiki Ekho EK-WL8-O Hybrid Wireless Optical Smoke SensorThe EK-WL8-O wireless optical smoke sensor is the latest in wireless smoke sensor technology. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor utilises optical smoke detection technologies and algorithms for improved performance which can contribute to reducing unwanted alarms. Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-7 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modules

GBP 121.34

1

Hochiki EK-WL8-OS Ekho Smoke Sensor cw Sounder

Hochiki EK-WL8-OS Ekho Smoke Sensor cw SounderThe EK-WL8-OS wireless optical smoke sensor with sounder is the latest in wireless smoke sensor technology. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor utilises optical smoke detection technologies and algorithms for improved performance which can contribute to reducing unwanted alarms. Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-7 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modules

GBP 203.18

1

Hochiki Ekho EK-WL8-OH Hybrid Wireless Multi-Sensor

Hochiki Ekho EK-WL8-OH Hybrid Wireless Multi-SensorThe EK-WL8-OH is the latest in wireless multi-criteria sensor technology. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor combines both smoke and heat detection technologies A1R for improved performance which can contribute to reducing unwanted alarms. Utilising well-proven adaptive radio signal processing algorithms ensures that the highest levels of life safety and system reliability are achieved.An in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-7 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modules

GBP 127.93

1

Hochiki Dual Zone Monitor DIN Module with SCI CHQ-DZMDINSCI

Hochiki CHQ-DZMDINSCI Dual Zone Monitor DIN Module with SCIModel CHQ-DZMDINSCI is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors 30 on each zone to be interfaced to Hochikis ESP analogue addressable system. The unit also features a Schottky Diode line continuity option when used inconjunction with the optional LCMU.Full monitoring against malfunction or disconnection together with a self-test feature through the ESP protocol ensure the integrity of the CHQ-DZMDINSCI at all times. The unit utilises simple DIL switches for reliable addressing. It is alsoavailableas a boxedmodule CHQ-DZMSCI. Both models feature an integral short-circuit isolator.NOTE When Resistive EOL option is chosen the conventional zone on the CHQ-DZMDINSCI does not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressSupports two independent zones of conventional detectorsBoth zones fully monitored for shortopen circuitRequires an auxiliary 24 V dc supplyAlso available as a boxed moduleBoth models feature an integral short-circuit isolatorApproved by LPCB

GBP 147.30

1

Hochiki HCP-EBLU-SCI Blue Addressable SCI Call Point

Hochiki HCP-EBLU-SCI Blue Addressable SCI Call PointThe Hochiki HCP-EBLU-SCI is a Manual Break Glass Call Point which is fully compatible with Hochikis ESP analogue addressable protocol.The Hochiki HCP-EBLU-SCI incorporates a LED mounted on the front cover which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-EBLU-SCI is operated. The unit is operated by pressing the EN54 compliant non-frangible plastic element and once operated produces a high level ESP interrupt allowing the control panel to respond very quickly.The device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing and the unit can also be flush mounted if required. An optional glass element is also available.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerLPCB Approved to EN54

GBP 36.07

1

Hochiki Dual Zone Monitor with SCI CHQ-DZMSCI

Hochiki CHQ-DZMSCI Dual Zone Monitor with SCIModel CHQ-DZMSCI is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors 30 on each zone to be interfaced to Hochikis ESP analogue addressable system. The unit also features a Schottky Diode line continuity option when used in conjunction with the optional LCMU.Full monitoring against malfunction or disconnection together with a self-test feature through the ESP protocol ensure the integrity of the CHQ-DZMSCI at all times. The CHQ-DZMSCI utilises simple DIL switches for reliable addressing. It is available as an OEM version as illustrated above and also as a DIN Rail mountable module CHQ-DZMDINSCI. Both models feature an integral short-circuit isolator.Please note When Resistive EOL option is chosen the conventional zone on the CHQ-DZMSCI does not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressSupports two independent zones of conventional detectorsBoth zones fully monitored for shortopen circuitRequires an auxiliary 24 V dc supplyDIN rail version availableBoth models feature an integral short-circuit isolatorApproved by LPCB

GBP 121.22

1

Hochiki Addressable Call Point with Short Circuit Isolator HCP-ESCI

Hochiki HCP-ESCI Addressable Call Point with Short Circuit IsolatorThe HochikiHCP-E is a Manual Break Glass Call Point which is fully compatible with Hochikis ESP analogue addressable protocol.The Hochiki HCP-E incorporates a red LED mounted on the front cover which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-E is operated. The unit is operated by pressing the EN54 compliant non-frangible plastic element and once operated produces a high level ESP interrupt allowing the control panel to respond very quickly.The device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing and the unit can also be flush mounted if required. An optional glass element is also available.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerSurface or flush mounting if surface mounting requires SR MOUNTING BOX sold separatelyDifferent colour options availableLPCB Approved to EN54

GBP 34.69

1

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke Detector

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke DetectorThe SOC-E3N is an optical smoke detector which is fully compatible with the majority of existing Conventional systems.The SOC-E3N incorporates Hochikis unique High Performance optical smoke chamber removing the need to use ionisation detectors in the majority of applications.ASWV Drift Compensation technology is incorporated to ensure the detector is operating at its optimum sensitivity and therefore reducing potential false alarms. If the contamination limit is exceeded then the integral red LED will flash once every three seconds to give a visual warning.The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance chamber Automatic Sensitivity Window Verification ASWV Drift Compensation Technology Remote Indicator outputWide voltage range 9.5 30 V dcLow profile design with one-piece outer coverSingle fire LED - 360 viewingRange of mounting basesApproved by LPCBCDX Range BenefitsQuality High quality products ensures long term reliabilityFlase Alarm Reduction Hoghikis conventional range uses advanced verificaition techniques to reduce the potential for false or unwanted alarms. In addition the Photoelectric Smoke Detectors operate on very low sensitivty yet exceed the requirements of the EN54 standard to minimise false alarms.Approvals Hochikis conventional products are tested and approved to the latest standards and regulations by the major European third party test bodies including LPCB and VdS.Simple Installation Simple installation integration and therefore cost minimisation is achieved through special bases integrated on the same set of cables.Integration and Cost Minimisation Using a number of special bases and through integration detection and evacuation devices on the same set of cables the lowest cost of installation and ownership are achieved. Low current consumption and the capability of integration into security systems further reduce ownership costs.Compatibility Development in alliance with independent panel manufactures ensures that functions and benefits of the Hochiki Conventional Detection range are incorporated and rigorous testing confirms compatibility and compliance.Locking Mechanism The Hochiki Conventional range has been designed for ease of installation with a wide range of bases and adapters and a locking mechanism on all detectors for on-site activation.Simple and Robust Simple and robust connections provide sufficient space for all modern fire alarm cables.

GBP 18.58

1

Hochiki SOC-E3NWHT Conventional White Photoelectric Smoke Detector

Hochiki SOC-E3NWHT Conventional White Photoelectric Smoke DetectorThe SOC-E3NWHT is a Photoelectric Smoke Detector which is fully compatible with the majority of existing Conventional systems. The SOC-E3NWHT incorporates Hochikis unique High Performance photoelectric smoke chamber removing the need to use Ionisation Detectors in the majority of applications.AFVW Drift Compensation technology is incorporated to ensure the Detector is operating at its optimum sensitivity and therefore reducing potential false alarms. If the contamination limit is exceeded then the integral red will flash once every three seconds to give a visual warning. The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance Chamber Automatic Sensitivity Window Verification ASWV Drift Compensation Technology Remote Indicator outputWide voltage range 9.5 30 V dcLow profile design with one-piece outer coverSingle fire LED - 360 viewingRange of mounting basesApproved by LPCBCDX Range BenefitsQuality High quality products ensures long term reliabilityFlase Alarm Reduction Hoghikis conventional range uses advanced verificaition techniques to reduce the potential for false or unwanted alarms. In addition the Photoelectric Smoke Detectors operate on very low sensitivty yet exceed the requirements of the EN54 standard to minimise false alarms.Approvals Hochikis conventional products are tested and approved to the latest standards and regulations by the major European third party test bodies including LPCB and VdS.Simple Installation Simple installation integration and therefore cost minimisation is achieved through special bases integrated on the same set of cables.Integration and Cost Minimisation Using a number of special bases and through integration detection and evacuation devices on the same set of cables the lowest cost of installation and ownership are achieved. Low current consumption and the capability of integration into security systems further reduce ownership costs.Compatibility Development in alliance with independent panel manufactures ensures that functions and benefits of the Hochiki Conventional Detection range are incorporated and rigorous testing confirms compatibility and compliance.Locking Mechanism The Hochiki Conventional range has been designed for ease of installation with a wide range of bases and adapters and a locking mechanism on all detectors for on-site activation.Simple and Robust Simple and robust connections provide sufficient space for all modern fire alarm cables.