129 results (0,18654 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 762mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 762mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 899.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 610mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 610mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 499.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 914mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 914mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 1199.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 813mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 813mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 929.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 914mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 914mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 699.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1118mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1118mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 999.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1524mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1524mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 1799.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 813mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 813mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long-term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 519.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1016mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1016mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 899.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1219mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1219mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 1199.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1397mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 1397mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 1549.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 762mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 762mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 459.99
1

Huntingdon Fusion Techniques PurgEye 300 Nano Weld Purge Monitor API0300N

Huntingdon Fusion Techniques PurgEye 300 Nano Weld Purge Monitor API0300N

Discover Huntingdon Fusion Technique's Argweld PurgEye 300 Nano, an exceptionally affordable entry-level Weld Purge Monitor designed to accurately measure and display precise oxygen levels. With its user-friendly interface and a large alphanumeric display, this remarkable device can clearly indicate oxygen levels ranging from 1000 parts per million (ppm) all the way down to an impressive 10 ppm. Experience the power of cost-effective welding purging with the Argweld PurgEye 300 Nano. Features Small, light and inexpensive compared to more sophisticated instruments with this range of measurement. Integrally mounted sensor shielded against electrical interference. Specifically developed for weld purging of high quality weld joints where pristine purging techniques are used. Suitable for all aseptic, hygienic and clean in-place welds. Low repair, refurbishment and recalibration costs. Operation with orbital welders, tube and pipe welding as well as for all welding enclosures, chambers and boxes. Ideal for welding stainless steel in high purity and ultra clean applications, as well as recommended for titanium, zirconium, niobium and nickel alloy welding. No pump, no moving parts to fail. AC 110/230 single phase operation. International electrical standards and connectors Ultra low cost. What's In The Box PurgEye 300 Nano Weld Purge Monitor External 12 V Power Supply Unit International multi mains adaptor connections Sample tube set (40cm red tubing and 1m green tubing) Sturdy protective storage carrying and presentation case Calibration certificate for quality control purpose User instruction booklet FAQs What sort of sensor is used in the Argweld PurgEye 300 Nano Weld Purge Monitor? TheArgweld PurgEye 300 NanoWeld Purge Monitor uses a solid state long life sensor of a unique design. It is very much lower in cost than other sensorsthat have to be used for 10 ppm measurements. What is the intended application for the Argweld PurgEye 300 Nano Weld Purge Monitor? TheArgweld PurgEye 300NanoWeld Purge Monitoris intended primarily for welding high quality joints made in titanium, duplex and other high spec stainless steels to prevent coking, oxidation and discolouration. Where the inlet for the monitor sensor can be connected to a constant flow of exhausting weld purge gas. When job specification demands accuracy in measuring oxygen levels in weld purge gas from 1000 ppm down to 10 ppm. Why isn't the Argweld PurgEye 300 Nano Weld Purge Monitor fitted with a pump? Most welding applications have an adequate flow of weld purge gas that can be exhausted over the measuring sensor. In the event that an adequate flow rate from the system being purged is not available, HFT also manufactures a Weld Purge Monitor with a pump, called the ArgweldPurgEye 500. What is the length of the purging hoses supplied with the Argweld PurgEye 300 Nano Weld Purge Monitor? The red tube is 40 cm long and the green tube is 1 metre long. Is the Argweld PurgEye 300 Nano Weld Purge Monitor sensitive to electrical disturbances? Each instrument has shielding to prevent most forms of interference. Quality Control Test and Inspection criteria are designed to account for as many variables as possible. It is extremely rare that electrical interference will affect the monitor. My Company needs a Calibration Certificate once a year for all instruments. How do I obtain one? In the event that certification is nevertheless required, HFT has calibration centres around the world. I need to detect oxygen level in pipes pre-heated to 300C (575F) Can I use the Argweld PurgEye 300 Nano for this range? The Argweld PurgEye Weld Purge Monitors should not be exposed to gas at a temperature above 50C (122F) . Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as helium and also non-inert gases including nitrogen and nitrogen/hydrogen mixes.

GBP 1099.99
1

Huntingdon Fusion Techniques Huntingon Fusion PurgEye 200 IP65 Hand Held Weld Purge Monitor with PurgeNet

Huntingdon Fusion Techniques Huntingon Fusion PurgEye 200 IP65 Hand Held Weld Purge Monitor with PurgeNet

Introducing the groundbreaking Huntingdon Fusion PurgEye 200 Weld Purge Monitor equipped with the revolutionary PurgeNet technology! This portable and rechargeable Oxygen Monitor is the world's first and only device of its kind, capable of accurately measuring oxygen levels from 1, 000 ppm (0.1%) down to an impressive 1 ppm (0.0001%) with a remarkable accuracy of 10 ppm. Huntingdon Fusion's latest innovation in Weld Purge Monitoring Technology, the PurgEye 200, brings forth numerous advancements that set it apart from the rest. Features Internal electro-mechanical pump with 1 l/m flow rate. USB lead included to control PurgeLog software. IP65 rated Long life, faster response sensor Internal rechargeable battery or mains power operated. Battery life up to 10 hours. Hand held easy to use instrument. Warning alarm levels between 1 and 999 ppm. Flow detection for accurate reading of gas samples. Outstanding protection against HF interference. Large character OLED screen for easy reading. Power on/off with standby button for sensor warm up. Can be charged by plugging directly into mains power with charging lead or optional charging dock. What's In The Box PurgEye 200 Storage case 150 mm long red tube to attach to red purge exhaust 1 metre long green tube with inlet filter Charging unit for internal battery with mains plug adaptors for all countries PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) User instruction booklet Calibration Certificate (valid for 12 months) FAQs 1. What is the intended application for the Argweld PurgEye 200 IP65 Weld Purge Monitor? For extreme weld quality control in aerospace, semiconductor, pharmaceutical, vacuum, biotech, food and drinks industries where pristine oxide free welds have to be achieved. Also, applications demanding extremely accurate readings from atmosphere right down to 10 parts per million (ppm) , such as welds made in titanium, duplex, nickel alloys and high specification stainless steels. 2. Does the Argweld PurgEye 200 IP65 have a pump? Yes, there is an integral electro-mechanical pump. 3. What sort of sensor is used in the Argweld PurgEye 200 IP65? The PurgEye 200 IP65 uses a solid state long life sensor of a unique design. It is much lower in cost than other sensors, that are used for measuring down to 10 ppm. 4. My Company needs a calibration certificate once a year for all instruments. How do I obtain one? At present, Huntingdon Fusion have calibration facilities in the UK, USA, Singapore and Norway. As time goes by they are planning to set up others. Once your instrument has been sent, they will recalibrate it and return it with a certificate within a few days. 5. Is the Argweld PurgEye 200 IP65 Weld Purge Monitor sensitive to electrical high frequency disturbances? Each instrument has shielding to prevent most forms of interference. Quality control test and inspection criteria are designed to account for as many variables as possible. 6. I need to detect oxygen level in pipes preheated to 300 ?C (572 ?F) Can I use the Argweld PurgEye 200 under these conditions? The Argweld PurgEye Weld Purge Monitors should not be exposed to gas at a temperature above 50 ?C (122 ?F) . 7. What is PurgeNetTM? PurgeNetTM controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices. 8. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium> and also non-inert gases including nitrogen and nitrogen/hydrogen mixes.

GBP 3399.99
1

Huntingdon Fusion Techniques PurgEye 1000 Remote Weld Purge Monitor API1000

Huntingdon Fusion Techniques PurgEye 1000 Remote Weld Purge Monitor API1000

The PurgEye 1000 Remote Weld Purge Monitor Oxygen Gas Analyser is a solution developed by HFT for measuring oxygen levels during welding processes in long tube lines or pipeline sections, where it may be impractical to measure the purge gas exhaust close to the weld. By fitting a sensing head directly at the weld location, the monitor can measure the oxygen level in the purge gas and transmit the information electronically to a remote monitor and operator located up to 1 km away. This ensures accurate weld purge readings and prevents adverse effects from oxidation. The portable monitor has a range from 1000 ppm down to 1 ppm, with an accuracy of 10 ppm, and the stainless steel sensing head can be easily manoeuvered through pipes as small as 1" (25 mm) in diameter. Benefits Accurate measurement of oxygen levels in weld purge gas down to 10 ppm (parts per million) Ability to measure purge gas exhaust up to 1 km away from the weld location Avoids the drawbacks of measuring oxygen levels in the joint gap, where outside oxygen and variable factors can affect accuracy Ensures correct weld purge readings and prevents adverse effects of oxidation on the joint Portable and compact design for easy handling and manoeuverability Equipped with a stainless steel sensing head that connects to various tube, pipe, and pipeline Weld Purging Systems Only requires one cable for power and data transmission Suitable for pipes with a diameter as small as 1" (25 mm) Provides real-time readings on an easily readable display Supports data logging for quality control and compliance purposes. What's In The Box PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) Docking station Sample tube set with filter Sturdy protective storage carrying and presentation case (a spare/replacement case is available for purchase) Calibration Certificate (valid for 12 months) User Instruction Manual Mains power lead or cable with international plug adaptors FAQs 1. What sort of sensor is used in the Argweld PurgEye 1000 'Remote' Weld Purge Monitor. The Argweld PurgEye 1000 Remote Weld Purge Monitor uses a solid state sensor of a unique design. It is much lower in cost than other sensors, has a faster reaction time than other sensors and has a long life. 2. What is the intended application for the Argweld PurgEye 1000 Remote Weld Purge Monitor? The Argweld PurgEye 1000 Remote Weld Purge Monitor allows the sensing head to be placed up to 1km away from the instrument so that readings from inside a pipeline or pipe fabrication can be taken directly at the joint. 3. Is the Argweld PurgEye 1000 Remote Weld Purge Monitor sensitive to electrical disturbances? Each instrument has shielding to prevent most forms of interference. Quality Control Test and Inspection criteria are designed to account for as many variables as possible. It is extremely rare that electrical interference will affect the monitor. 4. My Company needs a Calibration Certificate once a year for all instruments. How do I obtain one? Huntingdon Fusion Techniques HFT has a recalibration facility. 5. What is the minimum pipe size in which the sensor head can be used? 1 (25 mm) diameter) . 6. What is the sensor head housing made from? Stainless steel. 7. Do I need to fix the sensing head to the purging system? Huntingdon Fusion Techniques HFT can supply fixtures for the head to be mounted in a stable fashion to any kind of mechanical or inflatable pipe purging system. 8. What is inside the sensor head? The sensor head contains an electro-mechanical pump to ensure a steady flow of exhaust gas across the sensor for stable measurement purposes. 9. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium and also non-inert gases including nitrogen and nitrogen/hydrogen mixes 10. What is PurgeNet? PurgeNet controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices.wd_hide_on_desktop="no" wd_hide_on_tablet="no" wd_hide_on_mobile="no"\)

GBP 4699.99
1

Huntingdon Fusion Techniques PurgEye 1500 Site IP68 Weld Purge Monitor API0500S

Huntingdon Fusion Techniques PurgEye 1500 Site IP68 Weld Purge Monitor API0500S

The Argweld PurgEye 1500 Site IP68 Weld Purge Monitor is a specialised instrument used in welding processes to monitor and control the oxygen levels in the vicinity of the weld. Designed for rugged and demanding environments, it is certified to IP68, which ensures its resistance to water and dust ingress, making it suitable for both above-ground and underwater applications. The PurgEye 1500 Site IP68 utilises advanced sensor technology to accurately measure oxygen levels as low as 10 parts per million (ppm) , enabling precise control of the purging process to create high-quality, defect-free welds in stainless steel, titanium, and other reactive metals. Its robust construction, user-friendly interface, and durable battery life make it an essential tool for welders working in challenging conditions where maintaining oxygen-free environments is critical. Benefits Accurate monitoring and control of oxygen levels during welding processes Certified to IP68, ensuring resistance to water and dust ingress Suitable for both above-ground and underwater applications Advanced sensor technology for precise measurement of oxygen levels from 1000ppm to 1 ppm Enables precise control of the purging process for high-quality, defect-free welds Robust construction for durability in rugged environments User-friendly interface for easy operation Long battery life for extended use in the field as well as mains-powered. What's In The Box PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) Sample tube set with filter Sturdy protective storage carrying and presentation case (a spare/replacement case is available for purchase) Calibration Certificate (valid for 12 months) User Instruction Manual Mains power lead or cable with international plug adaptors FAQs 1. What is the intended application for the Argweld PurgEye Site Weld Purge Monitor? The PurgEye Site has been developed for use in extreme conditions such as might be found on a construction site. It is build into a robust, virtually indestructible case. For extreme weld quality control in aerospace, semiconductor, pharmaceutical, vacuum, biotech, food and drinks industries, petrochemical, oil and gas and all industries where pristine oxide free welds have to be achieved. Also, applications demanding extremely accurate readings from atmosphere right down to 10 parts per million (ppm) , such as welds made in titanium, duplex, nickel alloys and high specification stainless steels. 2. Does the Argweld PurgEye Site have a pump? Yes, there is an integral electro-mechanical pump. 3. What sort of sensor is used in the Argweld PurgEye Site? The PurgEye Site uses a solid state long life sensor of a unique design with a faster response time and greater stability of readings than other monitors. 4. My Company needs a calibration certificate once a year for all instruments. How do I obtain one? At present Huntingdon Fusion Techniques have calibration facilities in the UK, USA, Singapore and Norway. As time goes by they are planning to set up others. Once your instrument has been sent, it will be recalibrated and returned to you with a certificate within a few days. 5. Is the Argweld PurgEye Site Weld Purge Monitor sensitive to electrical high frequency disturbances? Each instrument has shielding to prevent most forms of interference. Quality control test and inspection criteria are designed to account for as many variables as possible. 6. I need to detect oxygen level in pipes preheated to 300C (572F) Can I use the Argweld PurgEye Site under these conditions? The Argweld PurgEye Weld Purge Monitors should not be exposed to gas at a temperature above 50C (122F) . Please contact us for information about exhaust purge gas cooling methods. 7. How safe is the monitor if I use it in rain or dust storms or if I drop it from a height? The case when sealed offers IP68 protection and when open it has IP65 protection. If the case is dropped from a great height it is unlikely that the monitor will suffer any damage. 8. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium and also non-inert gases including nitrogen and nitrogen/hydrogen mixes. 9. What is PurgeNet? PurgeNetcontrols the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices.

GBP 3299.99
1

Huntingdon Fusion Techniques Argweld HotPurge Heat Resistant Inflatable Pipe Weld Purge Systems - 1397mm

Huntingdon Fusion Techniques Argweld HotPurge Heat Resistant Inflatable Pipe Weld Purge Systems - 1397mm

Introducing Argweld HotPurge Inflatable Pipe Weld Purge Systems, designed for heat-treated pipework, enabling seamless pre-heating, welding, and post-weld heat treatment while maintaining an effective purge. Featuring cutting-edge IntaCal and PurgeGate technology, these systems ensure controlled inflation and prevent bursting due to over pressurisation. Moreover, the inclusion of RootGlo Centre Alignment Band allows precise positioning of the system beneath the joint, ensuring accurate and reliable results. BenefitsCan withstand temperatures up to 300C (572F) and have a maximum duration of 24 hours.Suitable for pipe diameters ranging from 6 to 88 (152 to 2, 235 mm) .Specifically designed for welding pre-heat and post-weld heat treated chrome steels like P11, P22, P91, P92 CMV, etc.Innovative RootGlo central band enables easy positioning inside the pipe and provides long-lasting glow for visibility.Systems can be positioned before pre-heating and remain in place throughout the welding and post-heat treatment cycles, ensuring continuous purging for up to 24 hours.Developed and manufactured by HFT, the original innovator of these systems, incorporating scientific knowledge and regular product updates.Reliable and efficient purge gas release with IntaCal, prevention of bursting using PurgeGate, and secure alignment with RootGlo Centre Alignment Band.FAQs1. How can Argweld HotPurge help me?HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels were developed for the welding of chrome steel pipe joints where the post weld heat treatment temperatures may be as high as 300C (572F) These Systems will allow you to generate zero colour coke-free welds without any defect caused by harmful gases or vapours. If you have any welding tasks where the heat generated might be too high for the other pipe purging systems in our range, it might well be appropriate to use HotPurge Systems.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) .3. What is the overall length?The dimensions between the dams vary from 28-36. In the event that you order your HotPurge Systems for working with bends in the pipework then the dimensions will be greater.4. Can Argweld HotPurge Systems be used forreturn bends?Yes, as long as you make it clear at your enquiry stage, that you will be pulling the HotPurge Systems through bends, then we can adjust the Systems accordingly.5. Are Argweld HotPurge Systems re-usable?You should be able to use your Systems for many heat treated weld joints as long as it is used within its specification and hasnt been damaged.6. What gases can I use with Argweld HotPurge Systems?These Systems are intended to be used with totally inert argon gas of at least 99.995% purity. It is very important that the System is placed within the pipe prior to heating and that the purge gas is turned on at the beginning of the heat treating cycles and remains on until the units are deflated and withdrawn at the end of the PWHT cycle.7. What are Argweld HotPurge Systems made from?HotPurge Systems are fabricated from high temperature resistant materials.8. How cost-effective are Argweld HotPurge?Using localised purging will save a lot of money in inert gas costs, by not having to purge whole pipe Systems and not having to pay for the cost of extra waiting time.9. Are Argweld HotPurge Systems resistant to heat?The materials selected for HotPurge manufacture are resistant to the temperatures that are expected during the heat treatment of chrome steels for weld joint manufacture.10. How do I measure the residual oxygen content?HFT manufactures a range of Weld Purge Monitors. The PurgEye 100 IP65 is the best general purpose Weld Purge Monitor on the market today. If you need to purge down to oxygen levels less than 100 ppm, then the PurgEye 200 IP65 or any of the others in the range will be suitable as they all measure very accurately down to 10 ppm.11. How do I position the product in the pipeline?There are pull loops that each have up to a 1, 000lb breaking strain. These can be connected to pull wires that will pull the HotPurge System from joint to joint.12. How long will HotPurge Systems remain inflated?HotPurge Systems remain inflated until the purge gas hose is detached.

GBP 4199.99
1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 965mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 965mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1399.99
1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 610mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 610mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 1049.99
1

Huntingdon Fusion Techniques Argweld HotPurge Heat Resistant Inflatable Pipe Weld Purge Systems - 178mm

Huntingdon Fusion Techniques Argweld HotPurge Heat Resistant Inflatable Pipe Weld Purge Systems - 178mm

Introducing Argweld HotPurge Inflatable Pipe Weld Purge Systems, designed for heat-treated pipework, enabling seamless pre-heating, welding, and post-weld heat treatment while maintaining an effective purge. Featuring cutting-edge IntaCal and PurgeGate technology, these systems ensure controlled inflation and prevent bursting due to over pressurisation. Moreover, the inclusion of RootGlo Centre Alignment Band allows precise positioning of the system beneath the joint, ensuring accurate and reliable results. BenefitsCan withstand temperatures up to 300C (572F) and have a maximum duration of 24 hours.Suitable for pipe diameters ranging from 6 to 88 (152 to 2, 235 mm) .Specifically designed for welding pre-heat and post-weld heat treated chrome steels like P11, P22, P91, P92 CMV, etc.Innovative RootGlo central band enables easy positioning inside the pipe and provides long-lasting glow for visibility.Systems can be positioned before pre-heating and remain in place throughout the welding and post-heat treatment cycles, ensuring continuous purging for up to 24 hours.Developed and manufactured by HFT, the original innovator of these systems, incorporating scientific knowledge and regular product updates.Reliable and efficient purge gas release with IntaCal, prevention of bursting using PurgeGate, and secure alignment with RootGlo Centre Alignment Band.FAQs1. How can Argweld HotPurge help me?HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels were developed for the welding of chrome steel pipe joints where the post weld heat treatment temperatures may be as high as 300C (572F) These Systems will allow you to generate zero colour coke-free welds without any defect caused by harmful gases or vapours. If you have any welding tasks where the heat generated might be too high for the other pipe purging systems in our range, it might well be appropriate to use HotPurge Systems.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) .3. What is the overall length?The dimensions between the dams vary from 28-36. In the event that you order your HotPurge Systems for working with bends in the pipework then the dimensions will be greater.4. Can Argweld HotPurge Systems be used forreturn bends?Yes, as long as you make it clear at your enquiry stage, that you will be pulling the HotPurge Systems through bends, then we can adjust the Systems accordingly.5. Are Argweld HotPurge Systems re-usable?You should be able to use your Systems for many heat treated weld joints as long as it is used within its specification and hasnt been damaged.6. What gases can I use with Argweld HotPurge Systems?These Systems are intended to be used with totally inert argon gas of at least 99.995% purity. It is very important that the System is placed within the pipe prior to heating and that the purge gas is turned on at the beginning of the heat treating cycles and remains on until the units are deflated and withdrawn at the end of the PWHT cycle.7. What are Argweld HotPurge Systems made from?HotPurge Systems are fabricated from high temperature resistant materials.8. How cost-effective are Argweld HotPurge?Using localised purging will save a lot of money in inert gas costs, by not having to purge whole pipe Systems and not having to pay for the cost of extra waiting time.9. Are Argweld HotPurge Systems resistant to heat?The materials selected for HotPurge manufacture are resistant to the temperatures that are expected during the heat treatment of chrome steels for weld joint manufacture.10. How do I measure the residual oxygen content?HFT manufactures a range of Weld Purge Monitors. The PurgEye 100 IP65 is the best general purpose Weld Purge Monitor on the market today. If you need to purge down to oxygen levels less than 100 ppm, then the PurgEye 200 IP65 or any of the others in the range will be suitable as they all measure very accurately down to 10 ppm.11. How do I position the product in the pipeline?There are pull loops that each have up to a 1, 000lb breaking strain. These can be connected to pull wires that will pull the HotPurge System from joint to joint.12. How long will HotPurge Systems remain inflated?HotPurge Systems remain inflated until the purge gas hose is detached.

GBP 549.99
1

Huntingdon Fusion Techniques Argweld HotPurge Heat Resistant Inflatable Pipe Weld Purge Systems - 584mm

Huntingdon Fusion Techniques Argweld HotPurge Heat Resistant Inflatable Pipe Weld Purge Systems - 584mm

Introducing Argweld HotPurge Inflatable Pipe Weld Purge Systems, designed for heat-treated pipework, enabling seamless pre-heating, welding, and post-weld heat treatment while maintaining an effective purge. Featuring cutting-edge IntaCal and PurgeGate technology, these systems ensure controlled inflation and prevent bursting due to over pressurisation. Moreover, the inclusion of RootGlo Centre Alignment Band allows precise positioning of the system beneath the joint, ensuring accurate and reliable results. BenefitsCan withstand temperatures up to 300C (572F) and have a maximum duration of 24 hours.Suitable for pipe diameters ranging from 6 to 88 (152 to 2, 235 mm) .Specifically designed for welding pre-heat and post-weld heat treated chrome steels like P11, P22, P91, P92 CMV, etc.Innovative RootGlo central band enables easy positioning inside the pipe and provides long-lasting glow for visibility.Systems can be positioned before pre-heating and remain in place throughout the welding and post-heat treatment cycles, ensuring continuous purging for up to 24 hours.Developed and manufactured by HFT, the original innovator of these systems, incorporating scientific knowledge and regular product updates.Reliable and efficient purge gas release with IntaCal, prevention of bursting using PurgeGate, and secure alignment with RootGlo Centre Alignment Band.FAQs1. How can Argweld HotPurge help me?HotPurge Pipe Weld Purging Systems for Heat Treated Chrome and High Strength Stainless Steels were developed for the welding of chrome steel pipe joints where the post weld heat treatment temperatures may be as high as 300C (572F) These Systems will allow you to generate zero colour coke-free welds without any defect caused by harmful gases or vapours. If you have any welding tasks where the heat generated might be too high for the other pipe purging systems in our range, it might well be appropriate to use HotPurge Systems.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) .3. What is the overall length?The dimensions between the dams vary from 28-36. In the event that you order your HotPurge Systems for working with bends in the pipework then the dimensions will be greater.4. Can Argweld HotPurge Systems be used forreturn bends?Yes, as long as you make it clear at your enquiry stage, that you will be pulling the HotPurge Systems through bends, then we can adjust the Systems accordingly.5. Are Argweld HotPurge Systems re-usable?You should be able to use your Systems for many heat treated weld joints as long as it is used within its specification and hasnt been damaged.6. What gases can I use with Argweld HotPurge Systems?These Systems are intended to be used with totally inert argon gas of at least 99.995% purity. It is very important that the System is placed within the pipe prior to heating and that the purge gas is turned on at the beginning of the heat treating cycles and remains on until the units are deflated and withdrawn at the end of the PWHT cycle.7. What are Argweld HotPurge Systems made from?HotPurge Systems are fabricated from high temperature resistant materials.8. How cost-effective are Argweld HotPurge?Using localised purging will save a lot of money in inert gas costs, by not having to purge whole pipe Systems and not having to pay for the cost of extra waiting time.9. Are Argweld HotPurge Systems resistant to heat?The materials selected for HotPurge manufacture are resistant to the temperatures that are expected during the heat treatment of chrome steels for weld joint manufacture.10. How do I measure the residual oxygen content?HFT manufactures a range of Weld Purge Monitors. The PurgEye 100 IP65 is the best general purpose Weld Purge Monitor on the market today. If you need to purge down to oxygen levels less than 100 ppm, then the PurgEye 200 IP65 or any of the others in the range will be suitable as they all measure very accurately down to 10 ppm.11. How do I position the product in the pipeline?There are pull loops that each have up to a 1, 000lb breaking strain. These can be connected to pull wires that will pull the HotPurge System from joint to joint.12. How long will HotPurge Systems remain inflated?HotPurge Systems remain inflated until the purge gas hose is detached.

GBP 1539.99
1

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 229mm

Huntingdon Fusion Techniques Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge Systems - 229mm

The Argweld QuickPurge Tube, Pipe & Pipeline Inflatable Weld Purge System comprises a tandem inflatable dam system connected by a volume reducing sleeve. Operating temperature 250C (482F) continuous use and up to 280C (586F) for short periods. The size of the system to be ordered must correspond with the ID of the pipe being welded. All systems come fitted with PurgeGate as standard.The QuickPurge design works best by keeping the sleeve as short as possible to fast results. With the short sleeve, it is difficult to pull the system through 90 bends. In the event that you will need to pull your QuickPurge system through 90 bends, please contact us.BenefitsTandem inflatable dam system: This ensures a complete seal around the weld joint, preventing oxygen from entering and causing oxidation.Volume reducing sleeve: This reduces the volume of the annulus between the pipes, which speeds up the purge process.Operating temperature of up to 250C (482F) continuously and up to 280C (586F) for short periods: This makes it suitable for a wide range of applications.Comes with PurgeGate as standard: This prevents the dams from overinflating and bursting, which can damage the system.Easy to use: The system is designed to be quick and easy to set up, even for inexperienced users.Fast results: The system can purge a pipe in minutes, which can save time and money.Can be used in pipes with a maximum bend radius of 1.5 times the pipe diameter: This makes it suitable for a wide range of pipes, including pipes with bends.FAQs1. How can Argweld QuickPurge help me?Dramatically reduced welding times achieved. Phenomenal savings in argon. For example, a 36 (900 mm) pipe joint might take from 4 to 8 hours to prepare and purge properly when using homemade devices such as discs made from cardboard, foam or rubber.With Argweld QuickPurge, it takes as little as 10 minutes which includes placing the system into position, inflating the dams and purging.2. What range of sizes is available?6 to 88 (152 to 2, 235 mm) 3. What is the overall length?Lengths will vary according to the diameter. The space between the dams is kept very short to minimise inert gas use consistent with the need to provide adequate gas coverage.4. Can Argweld QuickPurge Systems be used for return bends?It is necessary to tell HFT at the time of order, that the QuickPurge System is required for return bends. We will then manufacture longer collars to provide the necessary space to prevent the dams from being too close to the weld.5. Are Argweld QuickPurge Systems re-usable?Yes, QuickPurge II pays for itself in a few welds. QuickPurge is rugged and can be used for multiple welds.6. What gases can I use with Argweld QuickPurge Systems?Argon (Europe) and helium (N America) are the most common gases but any gas or gas mix can be used. Argon/hydrogen mixes and nitrogen have been used successfully.7. What are Argweld QuickPurge Systems made from?Predominantly low vapour pressure, flexible, durable, heat resistant materials selected for longevity.8. How cost-effective are Argweld QuickPurge Systems?Ask for our return on investment sheet. The savings using QuickPurge are really stunning.9. Are Argweld QuickPurge Systems resistant to heat?Yes, QuickPurge is resistant to the heat of all typical arc welding processes.Special heat-protected purge systems called Argweld HotPurge are available to accommodate pre-weld and post-weld heat treated joints.Heat Protecting Band accessories are available for Keyhole Tig or Keyhole Plasma welding. Or for any other applications where the material under the weld becomes too hot.10. How do I measure the residual oxygen content?Use a dedicated PurgEye Weld Purge Monitor.11. How do I position the product in the pipeline?QuickPurge Systems are manufactured with high strength pull loops that allow the fixing of pull cords. RootGlo is a glow sleeve which can be seen readily through the root gap when making open root welds. Exposure to 10 minutes of light provides illumination inside the pipe for up to 12 hours.12. How long will Argweld QuickPurge Systems remain inflated?Continuous purging will ensure effective sealing and this allows time for post-weld cooling and x-ray or ultrasonic inspection. Deflation is instant once the argon feed hose has been disconnected.

GBP 499.99
1