21 results (0,13580 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 610mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 610mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 499.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 762mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 762mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 899.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 914mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 914mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 1199.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 813mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 2" BSP - 813mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 929.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 838mm

Huntingdon Fusion Techniques PetroChem Stoppers - 838mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 599.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 762mm

Huntingdon Fusion Techniques PetroChem Stoppers - 762mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 499.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 889mm

Huntingdon Fusion Techniques PetroChem Stoppers - 889mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 659.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 787mm

Huntingdon Fusion Techniques PetroChem Stoppers - 787mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 499.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 864mm

Huntingdon Fusion Techniques PetroChem Stoppers - 864mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 619.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 914mm

Huntingdon Fusion Techniques PetroChem Stoppers - 914mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 699.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 813mm

Huntingdon Fusion Techniques PetroChem Stoppers - 813mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 549.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 737mm

Huntingdon Fusion Techniques PetroChem Stoppers - 737mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 469.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 1067mm

Huntingdon Fusion Techniques PetroChem Stoppers - 1067mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 929.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 1168mm

Huntingdon Fusion Techniques PetroChem Stoppers - 1168mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 1099.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 711mm

Huntingdon Fusion Techniques PetroChem Stoppers - 711mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 439.99
1

Huntingdon Fusion Techniques Huntingon Fusion PurgEye 200 IP65 Hand Held Weld Purge Monitor with PurgeNet

Huntingdon Fusion Techniques Huntingon Fusion PurgEye 200 IP65 Hand Held Weld Purge Monitor with PurgeNet

Introducing the groundbreaking Huntingdon Fusion PurgEye 200 Weld Purge Monitor equipped with the revolutionary PurgeNet technology! This portable and rechargeable Oxygen Monitor is the world's first and only device of its kind, capable of accurately measuring oxygen levels from 1, 000 ppm (0.1%) down to an impressive 1 ppm (0.0001%) with a remarkable accuracy of 10 ppm. Huntingdon Fusion's latest innovation in Weld Purge Monitoring Technology, the PurgEye 200, brings forth numerous advancements that set it apart from the rest. Features Internal electro-mechanical pump with 1 l/m flow rate. USB lead included to control PurgeLog software. IP65 rated Long life, faster response sensor Internal rechargeable battery or mains power operated. Battery life up to 10 hours. Hand held easy to use instrument. Warning alarm levels between 1 and 999 ppm. Flow detection for accurate reading of gas samples. Outstanding protection against HF interference. Large character OLED screen for easy reading. Power on/off with standby button for sensor warm up. Can be charged by plugging directly into mains power with charging lead or optional charging dock. What's In The Box PurgEye 200 Storage case 150 mm long red tube to attach to red purge exhaust 1 metre long green tube with inlet filter Charging unit for internal battery with mains plug adaptors for all countries PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) User instruction booklet Calibration Certificate (valid for 12 months) FAQs 1. What is the intended application for the Argweld PurgEye 200 IP65 Weld Purge Monitor? For extreme weld quality control in aerospace, semiconductor, pharmaceutical, vacuum, biotech, food and drinks industries where pristine oxide free welds have to be achieved. Also, applications demanding extremely accurate readings from atmosphere right down to 10 parts per million (ppm) , such as welds made in titanium, duplex, nickel alloys and high specification stainless steels. 2. Does the Argweld PurgEye 200 IP65 have a pump? Yes, there is an integral electro-mechanical pump. 3. What sort of sensor is used in the Argweld PurgEye 200 IP65? The PurgEye 200 IP65 uses a solid state long life sensor of a unique design. It is much lower in cost than other sensors, that are used for measuring down to 10 ppm. 4. My Company needs a calibration certificate once a year for all instruments. How do I obtain one? At present, Huntingdon Fusion have calibration facilities in the UK, USA, Singapore and Norway. As time goes by they are planning to set up others. Once your instrument has been sent, they will recalibrate it and return it with a certificate within a few days. 5. Is the Argweld PurgEye 200 IP65 Weld Purge Monitor sensitive to electrical high frequency disturbances? Each instrument has shielding to prevent most forms of interference. Quality control test and inspection criteria are designed to account for as many variables as possible. 6. I need to detect oxygen level in pipes preheated to 300 ?C (572 ?F) Can I use the Argweld PurgEye 200 under these conditions? The Argweld PurgEye Weld Purge Monitors should not be exposed to gas at a temperature above 50 ?C (122 ?F) . 7. What is PurgeNetTM? PurgeNetTM controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices. 8. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium> and also non-inert gases including nitrogen and nitrogen/hydrogen mixes.

GBP 3399.99
1

Huntingdon Fusion Techniques Argweld Weld Trailing Shields - ATS300

Huntingdon Fusion Techniques Argweld Weld Trailing Shields - ATS300

The Argweld Weld Trailing Shields offer several benefits, including faster welding, cost savings, and the production of high-quality welds. These shields are designed with a stainless steel mesh body that allows argon gas to be evenly diffused without turbulence. Replaceable silicone rubber side shields prevent argon from escaping sideways, ensuring a continuous gas shield over the weld metal. This shield remains in place until the welded metal has cooled below its oxidation temperature. The Argweld Weld Trailing Shields are reusable and can withstand temperatures up to 230C. They eliminate the need for expensive purge chambers, reduce re-work, and enable faster welding. They are suitable for welding a variety of metals, including titanium, zirconium, nickel, cobalt alloys, stainless and duplex steels, and other reactive metals. These shields save costs by minimizing re-work and gas usage, avoiding rejected welds caused by oxidation. They are available in flat models for sheet or plate work and profiled models for welding internal and external pipes, vessels, and tanks. When using Argweld Weld Trailing Shields, welds retain their brightness and shine without discoloration or oxidation, even at higher welding speeds. These shields are readily available for most popular sizes of pipes and vessels. Features - Sleek design and a unique torch holder for easy interchangeability of shield sizes without changing the welding torch. - For right and left-handed use. - Compatible with TIG, MIG, or Plasma welding torches. - Provide excellent gas coverage when welding titanium, zirconium, cobalt alloys, duplex steels, stainless steels, and other reactive metals. - Profiled shields are tailored to specific pipe, tube, vessel, or tank diameters. - Flat shields available for plate, sheet, rectangular tanks, and fabrications. - Suitable for both manual and machine-mounted torches, enabling faster welding with a reliable gas shield. - Each shield undergoes testing to ensure perfect gas coverage, smooth movement, and no leaks. - Manufactured in the UK according to European Standards and Quality Control Procedures. Benefits - Reduced gas consumption - Avoidance of re-work - Elimination of wasted material costs - Prevention of rejected welds due to oxidation. FAQs 1. What are the benefits of using an Argweld Weld Trailing Shields? There are several reasons, some of which are: A. The chance of a weld defect is dramatically reduced due to the wide gas coverage held over the weld for a longer period during welding, while the heated metal is cooling below the oxidation temperature. B. Welds are finished in a bright and shiny condition, minimizing or eliminating post weld grinding and cleaning. C. The heat affected zones of a weld are left clean when using an Argweld Weld Trailing Shields because of the extra wide gas coverage. D. Welders can weld faster because of the extra time that the weld remains covered with inert gas when using an Argweld Weld Trailing Shields. E. Significant reduction of manufacturing costs due to the reduction of post weld cleaning and the reduction of defects when using an Argweld Weld Trailing Shields. 2. Can I use Argweld Weld Trailing Shields for stainless steel as well as titanium and zirconium? Yes, Argweld Weld Trailing Shields are extremely valuable for all stainless steel, duplex steel and other alloy steel as well as titanium, zirconium and all of the nickel and cobalt alloys. 3. Can I buy an Argweld Weld Trailing Shield which is longer or wider? Yes. Argweld Weld Trailing Shields are designed for two methods of use: A. For manual welding where they are light in weight and easy to manipulate by the manual welder when he has an Argweld Weld Trailing Shield attached to his welding torch. B. For automatic welding machines. For automatic welding machines, where weight and size is less of a concern, Argweld Weld Trailing Shields are available in longer and wider dimensions to allow for much faster welding speeds and much hotter welds where greater gas coverage is necessary for obtaining clean defect free welds. 4. Can Argweld Weld Trailing Shields be used on any welding torch? Argweld Weld Trailing Shields are designed and delivered with a universal worm drive circular clip that will open and close around any shield gas nozzle on any TIG (GTAW), MIG (GMAW) or Plasma (PAW) manual or machine torch. 5. Can I weld flat sheet and plate with Argweld Weld Trailing Shields? Yes, one of the Argweld products is a flat Argweld Weld Trailing Shields which is available as an accessory for manual welding torches and another flat version for machine mounted welding torches. 6. Can I weld on the outside of pipes and vessels with Argweld Weld Trailing Shields? Yes, Argweld Weld Trailing Shields are kept in stock for most popular sizes of pipes and vessels. Simply tell us the diameter of your pipe or vessel and we will provide an exact match. 7. Can I weld on the inside of pipes and vessels with Argweld

GBP 499.99
1

Huntingdon Fusion Techniques PurgEye 1500 Site IP68 Weld Purge Monitor API0500S

Huntingdon Fusion Techniques PurgEye 1500 Site IP68 Weld Purge Monitor API0500S

The Argweld PurgEye 1500 Site IP68 Weld Purge Monitor is a specialised instrument used in welding processes to monitor and control the oxygen levels in the vicinity of the weld. Designed for rugged and demanding environments, it is certified to IP68, which ensures its resistance to water and dust ingress, making it suitable for both above-ground and underwater applications. The PurgEye 1500 Site IP68 utilises advanced sensor technology to accurately measure oxygen levels as low as 10 parts per million (ppm) , enabling precise control of the purging process to create high-quality, defect-free welds in stainless steel, titanium, and other reactive metals. Its robust construction, user-friendly interface, and durable battery life make it an essential tool for welders working in challenging conditions where maintaining oxygen-free environments is critical. Benefits Accurate monitoring and control of oxygen levels during welding processes Certified to IP68, ensuring resistance to water and dust ingress Suitable for both above-ground and underwater applications Advanced sensor technology for precise measurement of oxygen levels from 1000ppm to 1 ppm Enables precise control of the purging process for high-quality, defect-free welds Robust construction for durability in rugged environments User-friendly interface for easy operation Long battery life for extended use in the field as well as mains-powered. What's In The Box PurgeNet Smart Cable for transferring Weld Purge Data PurgeLog Data Logging Software (USB Data Stick) Sample tube set with filter Sturdy protective storage carrying and presentation case (a spare/replacement case is available for purchase) Calibration Certificate (valid for 12 months) User Instruction Manual Mains power lead or cable with international plug adaptors FAQs 1. What is the intended application for the Argweld PurgEye Site Weld Purge Monitor? The PurgEye Site has been developed for use in extreme conditions such as might be found on a construction site. It is build into a robust, virtually indestructible case. For extreme weld quality control in aerospace, semiconductor, pharmaceutical, vacuum, biotech, food and drinks industries, petrochemical, oil and gas and all industries where pristine oxide free welds have to be achieved. Also, applications demanding extremely accurate readings from atmosphere right down to 10 parts per million (ppm) , such as welds made in titanium, duplex, nickel alloys and high specification stainless steels. 2. Does the Argweld PurgEye Site have a pump? Yes, there is an integral electro-mechanical pump. 3. What sort of sensor is used in the Argweld PurgEye Site? The PurgEye Site uses a solid state long life sensor of a unique design with a faster response time and greater stability of readings than other monitors. 4. My Company needs a calibration certificate once a year for all instruments. How do I obtain one? At present Huntingdon Fusion Techniques have calibration facilities in the UK, USA, Singapore and Norway. As time goes by they are planning to set up others. Once your instrument has been sent, it will be recalibrated and returned to you with a certificate within a few days. 5. Is the Argweld PurgEye Site Weld Purge Monitor sensitive to electrical high frequency disturbances? Each instrument has shielding to prevent most forms of interference. Quality control test and inspection criteria are designed to account for as many variables as possible. 6. I need to detect oxygen level in pipes preheated to 300C (572F) Can I use the Argweld PurgEye Site under these conditions? The Argweld PurgEye Weld Purge Monitors should not be exposed to gas at a temperature above 50C (122F) . Please contact us for information about exhaust purge gas cooling methods. 7. How safe is the monitor if I use it in rain or dust storms or if I drop it from a height? The case when sealed offers IP68 protection and when open it has IP65 protection. If the case is dropped from a great height it is unlikely that the monitor will suffer any damage. 8. Can Weld Purge Monitors only be used when purging with argon? The PurgEye Weld Purge Monitors measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium and also non-inert gases including nitrogen and nitrogen/hydrogen mixes. 9. What is PurgeNet? PurgeNetcontrols the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices.

GBP 3299.99
1