27 results (0,13798 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 305mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 305mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 119.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 279mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 279mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 129.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 254mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 254mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 102.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 229mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 229mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 89.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 279mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 279mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 178mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 178mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 89.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 203mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 203mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 99.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 254mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 254mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 229mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 229mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 119.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 305mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 305mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Argweld Water Soluble Weld Purge Film Kit APF0001

Huntingdon Fusion Techniques Argweld Water Soluble Weld Purge Film Kit APF0001

The Argweld Weld Purge Film and Argweld Super Weld Purge Adhesive combine to create dams that form an impenetrable barrier during welding purging, ensuring optimal conditions. However, these dams can be effortlessly removed either during hydrostatic pipe testing or through regular washing, allowing for easy cleanup and maintenance. Avoid the drawbacks of paper-based weld purging products and purge paper cones that leave behind unwanted paper fibers, detrimental to clean weld purging. Instead, opt for the superior alternative: Weld Purge Film. Unlike paper and sponge products, this film does not contain water, ensuring the dissolvable purge dam it creates leaves no harmful fibers behind, thus safeguarding the weld integrity. This water-soluble weld purge film is also biodegradable, making it environmentally friendly, and it proves highly effective as a purge gas barrier during TIG welding when using a tandem pipe purging bladder is impractical. By utilizing Argweld Water Soluble Weld Purge Film in conjunction with Argweld Super Weld Purge Adhesive, manufacturing pipe purging dams becomes a hassle-free and cost-effective solution. Benefits - Weld Purge Film does not contain water, unlike paper and sponge products. - The film ensures that the dissolvable purge dam leaves no paper fibers behind, which can be harmful to the weld. - Water-soluble weld purge film is biodegradable, making it environmentally friendly. - It acts as an effective purge gas barrier during TIG welding when using a tandem pipe purging bladder is not practical. - Argweld Water Soluble Weld Purge Film and Argweld Super Weld Purge Adhesive provide an easy and cost-effective solution for manufacturing pipe purging dams. What's In The Box - 20 Square Metres of Argweld Water Soluble Weld Purge Film - Cutting Knife - 2 bottles of Weld Purge Film Super Adhesive - User Instruction Manual FAQs 1. I want to see the weld root and how it is forming and progressing. Can I do that with Argweld Water Soluble Weld Purge Film? Yes, the Argweld Water Soluble Weld Purge Film is transparent which allows welders or their assistants to see the weld root clearly during welding. 2. Why should I use Argweld Water Soluble Weld Purge Film, rather than other similar products in the market place? There are several reasons to use Argweld Water Soluble Weld Purge Film, some of which are: - It allows welders to see the weld root as the weld is progressing. - It arrives as a complete kit with Weld Purge Film, Water Soluble Super Adhesive, Safety Knife and User Instruction Manual. - The price is significantly lower than other water soluble products. - We keep large volumes of Argweld Water Soluble Weld Purge Film in stock at all times, so you will never be left halfway through a job without supplies. - Argweld Water Soluble Weld Purge Film Kits are purpose developed and manufactured for the Pipe Welding industries. 3. Can I use Argweld Water Soluble Weld Purge Film in a paper and pulp manufacturing plant? Yes. There are no harmful ingredients which will affect the paper making process. Our chemical analysis report is available on request. The film dissolves completely down to molecular level and doesn't form clumps the way that water soluble paper will. 4. Can you tell me about the Halides in the film and their levels? We can provide a Chemical Analysis document to show that the level of Halides in the Argweld Water Soluble Weld Purge Film is lower than the minimum levels which cause concern in the welding of stainless steel in, for example, nuclear facilities. 5. How do I fix Argweld Water Soluble Weld Purge Film inside pipes? We supply Argweld Water Soluble Super Adhesive and comprehensive instructions explaining how a purge film adhesive dries and fixes the purge film dam much better inside pipes. 6. Is Argweld Water Soluble Weld Purge Film the same material as Dissolvo? There are two products on the market place under the name Dissolvo. One is a water dispersible paper. The other is a PVOH plastic film. These products are in no way connected with Huntingdon Fusion Techniques HFT or in our product range. 7. I have tried using paper dams and cones do not stick well inside pipes. Will the film work any better? Argweld Water Soluble Super Adhesive fixes the Argweld Water Soluble Weld Purge Film dam very securely to the pipe wall and creates an impenetrable barrier until water arrives to wash it away. 8. Will Argweld Water Soluble Weld Purge Film burn? Argweld Water Soluble Weld Purge Film does not ignite if the temperature becomes too hot. 9. Where can I obtain Argweld Water Soluble Weld Purge Film Kits? Argweld Water Soluble Weld Purge Film is solely and exclusively manufactured by Huntingdon Fusion Techniques HFT and can be purchased directly from Express Weldcare Services (EWS). 10. How soluble are these purging materials? The Argweld Water Soluble Weld Purge Film dissolves completely down to the molecular level. Other water soluble products may only be

GBP 159.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 279mm

Huntingdon Fusion Techniques PetroChem Stoppers - 279mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 139.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 254mm

Huntingdon Fusion Techniques PetroChem Stoppers - 254mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 129.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 330mm

Huntingdon Fusion Techniques PetroChem Stoppers - 330mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 159.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 127mm

Huntingdon Fusion Techniques PetroChem Stoppers - 127mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 203mm

Huntingdon Fusion Techniques PetroChem Stoppers - 203mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 119.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 229mm

Huntingdon Fusion Techniques PetroChem Stoppers - 229mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 129.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 356mm

Huntingdon Fusion Techniques PetroChem Stoppers - 356mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 169.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 178mm

Huntingdon Fusion Techniques PetroChem Stoppers - 178mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 119.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 51mm

Huntingdon Fusion Techniques PetroChem Stoppers - 51mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length, and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 104.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 152mm

Huntingdon Fusion Techniques PetroChem Stoppers - 152mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 76mm

Huntingdon Fusion Techniques PetroChem Stoppers - 76mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length, and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 104.99
1