28 results (0,15309 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 305mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 305mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 119.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 279mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 279mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 129.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 254mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 254mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 102.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 229mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 229mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 89.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 279mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 279mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 178mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 178mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 89.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 229mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 229mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 119.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 254mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 254mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 305mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 305mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 203mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 203mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 99.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 279mm

Huntingdon Fusion Techniques PetroChem Stoppers - 279mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 139.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 330mm

Huntingdon Fusion Techniques PetroChem Stoppers - 330mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 159.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 254mm

Huntingdon Fusion Techniques PetroChem Stoppers - 254mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 129.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 229mm

Huntingdon Fusion Techniques PetroChem Stoppers - 229mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 129.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 178mm

Huntingdon Fusion Techniques PetroChem Stoppers - 178mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 119.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 305mm

Huntingdon Fusion Techniques PetroChem Stoppers - 305mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 139.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 76mm

Huntingdon Fusion Techniques PetroChem Stoppers - 76mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length, and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 104.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 356mm

Huntingdon Fusion Techniques PetroChem Stoppers - 356mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify your required length and it can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 169.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 102mm

Huntingdon Fusion Techniques PetroChem Stoppers - 102mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 203mm

Huntingdon Fusion Techniques PetroChem Stoppers - 203mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F). Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F). 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1,118 mm). 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F). 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock. 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 119.99
1

Huntingdon Fusion Techniques PetroChem Stoppers - 127mm

Huntingdon Fusion Techniques PetroChem Stoppers - 127mm

The Inflatable PetroChem Pipe Stoppers are constructed with a premium latex rubber internal inflatable bag and shielded by a durable layer resistant to petrochemicals, featuring a robust nylon cover impregnated with woven polyurethane. These Stoppers can be easily inflated through a valve located at the end of the inflation hose, using either a standard foot pump or compressor. The recommended maximum temperature for this standard range is 80C (176F) . Applications All petrochemical operations where hydrocarbons are present in liquid and gas form. Debris stopping during machining operations where pipes have had hydrocarbon liquids or solids inside. Leak testing of pipework systems where pipes have had hydrocarbon liquids or solids inside. Low-pressure hydrostatic tests where pipes have had hydrocarbon liquid or solids inside. On-site thermoforming of bends in ducting and conduit materials. Fibre-optic construction projects. Debris and animal barriers for overnight protection of pipelines where pipes have had hydrocarbon liquids or solids inside. Plumbing operations. FAQs 1. What is the maximum temperature range for PetroChem Stoppers? The recommended maximum temperature for this standard range is 80C (176F) . 2. What is the size range for PetroChem Stoppers? The size range is 1 - 44" (25 - 1, 118 mm) . 3. How do I inflate the Stoppers? Each Stopper is designed and fitted with a standard Schrader valve, which will attach to any foot pump or compressor. 4. Can the PetroChem Stoppers be used with Heat Covers for higher heat protection? Yes, Heat Covers are available, which will provide protection up to 300C (572F) . 5. Can I have the inflation hose any longer? Yes, simply specify when ordering and your required length can be fitted for a small surcharge. 6. Are PetroChem Stoppers kept in stock? We do keep a number of PetroChem Stoppers in stock? 7. What is the maximum inflation pressure? This depends on the diameter of the stopper. Full details per size can be found in the User Instruction Manual, but also stamped onto each stopper for safety purposes. 8. Can the stopper be used more than once? Yes, it can be used time and time again, provided it isn't overinflated and kept in good condition.

GBP 109.99
1