113 results (0,21460 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

5x Indexa 2" x 2" x 10g Aluminium Square Hollow Section 6063 x 1m - 1 Pieces

5x Indexa 2" x 2" x 10g Aluminium Square Hollow Section 6063 x 1m - 1 Pieces

Grade 6063 Medium strength alloy with additions of magnesium and silicon. Has good formability in manufacture, is heat treatable and offers good mechanical properties. Also has a high corrosion resistance and is readily suited to welding. Typically used in architectural and industrial applications such as complex extrusions for window frames, doors frames, roofs, signs, shop fittings, stair balustrades rails and posts.

GBP 119.95
1

5x Indexa 4" x 2" x 10g Grade 6082 Aluminium Rectangular Hollow Section x 1 Metre

5x Indexa 4" x 2" x 10g Grade 6082 Aluminium Rectangular Hollow Section x 1 Metre

Grade 6082 Medium strength alloy with very good corrosion resistance. Additions of magnesium, manganese and silicon enhance the mechanical and corrosion resistance properties. Good cold forming properties, ease of joining, good machinability and high mechanical strengths. Used for packaging containers, foils, tubes, printing plates, strip for heat exchangers, boiler making, insulation foils, kitchenware, chemical and food industry equipment containers, ore skips, automotive trim and light reflectors.

GBP 154.95
1

Indexa 3in x 24in Aluminium Round Bar Grade 6082 - 1 Piece

Indexa 3in x 24in Aluminium Round Bar Grade 6082 - 1 Piece

Grade 6082 Medium strength alloy with very good corrosion resistance. Additions of magnesium, manganese and silicon enhance the mechanical and corrosion resistance properties. Good cold forming properties, ease of joining, good machinability and high mechanical strengths. Used for packaging containers, foils, tubes, printing plates, strip for heat exchangers, boiler making, insulation foils, kitchenware, chemical and food industry equipment containers, ore skips, automotive trim and light reflectors.

GBP 104.99
1

Indexa 3-1/2in x 24in Aluminium Round Bar Grade 6082 - 1 Piece

Indexa 3-1/2in x 24in Aluminium Round Bar Grade 6082 - 1 Piece

Grade 6082 Medium strength alloy with very good corrosion resistance. Additions of magnesium, manganese and silicon enhance the mechanical and corrosion resistance properties. Good cold forming properties, ease of joining, good machinability and high mechanical strengths. Used for packaging containers, foils, tubes, printing plates, strip for heat exchangers, boiler making, insulation foils, kitchenware, chemical and food industry equipment containers, ore skips, automotive trim and light reflectors.

GBP 109.99
1

Indexa 1-1/4in x 13in Phosphor Bronze Round Bar CC481K/PB1 - 1 Piece

Indexa 1-1/4in x 13in Phosphor Bronze Round Bar CC481K/PB1 - 1 Piece

CC481K/PB1 10-12% tin containing copper alloy with small phosphorus content added to increase fluidity and de-oxidise the material during casting. The high tin content imparts a very good corrosion resistance in marine environments and brine. Good resistance to shock loading and can be soldered and brazed. Used in the manufacture of pump and valves, gears, worm wheels, bushes and bearings for medium to heavy loading at high speed and general engineering components.

GBP 119.99
1

Indexa 1-1/2in x 13in Phosphor Bronze Round Bar CC481K/PB1 - 1 Piece

Indexa 1-1/2in x 13in Phosphor Bronze Round Bar CC481K/PB1 - 1 Piece

CC481K/PB1 10-12% tin containing copper alloy with small phosphorus content added to increase fluidity and de-oxidise the material during casting. The high tin content imparts a very good corrosion resistance in marine environments and brine. Good resistance to shock loading and can be soldered and brazed. Used in the manufacture of pump and valves, gears, worm wheels, bushes and bearings for medium to heavy loading at high speed and general engineering components.

GBP 162.99
1

Indexa CC12 138 x 40 x 40mm Serrated Adjustable Clamp

Indexa CC12 138 x 40 x 40mm Serrated Adjustable Clamp

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts. Features and Benefits Low profile clamp that keeps top surfaces clear for machining Ideal for rough or finished parts Black oxide finish for increased durability Specifications Material: Medium carbon steel Hardness: Jaw only: HRC 38 Surface finish: Black Oxide Jaws: Surface treated with high frequency quenching Typical Applications Machining Metal

GBP 129.99
1

Indexa CC12 105 x 35 x 30mm Serrated Adjustable Clamp

Indexa CC12 105 x 35 x 30mm Serrated Adjustable Clamp

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts. Features and Benefits Low profile clamp that keeps top surfaces clear for machining Ideal for rough or finished parts Black oxide finish for increased durability Specifications Material: Medium carbon steel Hardness: Jaw only: HRC 38 Surface finish: Black Oxide Jaws: Surface treated with high frequency quenching Typical Applications Machining Metal

GBP 99.99
1

Indexa CC12 105 x 35 x 30mm Ground Adjustable Clamp

Indexa CC12 105 x 35 x 30mm Ground Adjustable Clamp

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts. Features and Benefits Low profile clamp that keeps top surfaces clear for machining Ideal for rough or finished parts Black oxide finish for increased durability Specifications Material: Medium carbon steel Hardness: Jaw only: HRC 38 Surface finish: Black Oxide Jaws: Surface treated with high frequency quenching Typical Applications Machining Metal

GBP 89.99
1

Indexa CC12 138 x 40 x 40mm Ground Adjustable Clamp

Indexa CC12 138 x 40 x 40mm Ground Adjustable Clamp

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts. Features and Benefits Low profile clamp that keeps top surfaces clear for machining Ideal for rough or finished parts Black oxide finish for increased durability Specifications Material: Medium carbon steel Hardness: Jaw only: HRC 38 Surface finish: Black Oxide Jaws: Surface treated with high frequency quenching Typical Applications Machining Metal

GBP 119.99
1

5x Indexa 2" x 2" x 1/4" x 1m Aluminium Channel 6082 (1 Piece)

5x Indexa 2" x 2" x 1/4" x 1m Aluminium Channel 6082 (1 Piece)

Manufactured from Grade 6063 medium strength alloy, each aluminium channel has additions of magnesium and silicon for overall longevity and ease of manipulating the product. Available in a range of imperial sizes, each channel is 1 metre long and has good formability in manufacture, is heat treatable and offers good mechanical properties.Features and Benefits Available in a variety of sizes to suit your requirements Readily suited for welding Possesses a higher corrosion resistance for product longevity Reduces material wastage as it saves you milling or cutting down from a larger block of aluminiumTypical Applications Typically used in architectural and industrial applications such as complex extrusions for window frames, doors frames, roofs, signs, shop fittings,stair balustrades rails and posts

GBP 149.95
1

Indexa 5/16"x6"x36" Ground Flatstock

Indexa 5/16"x6"x36" Ground Flatstock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 109.99
1

Indexa 5/8" x 10" x 18" Ground Flat Stock

Indexa 5/8" x 10" x 18" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 159.99
1

Indexa 20mmx100mmx1000mm Ground Flat Stock

Indexa 20mmx100mmx1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 149.99
1

Indexa 12mm x 75mm x 1000mm Ground Flat Stock

Indexa 12mm x 75mm x 1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 89.99
1

Indexa 30mmx30mmx1000mm Ground Flat Stock

Indexa 30mmx30mmx1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 109.99
1

Indexa 40mmx40mmx1000mm Ground Flat Stock

Indexa 40mmx40mmx1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 139.99
1

Indexa 3/8" x 12" x 18" Ground Flat Stock

Indexa 3/8" x 12" x 18" Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 119.99
1

Indexa 20mm x 80mm x 1000mm Ground Flat Stock

Indexa 20mm x 80mm x 1000mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 133.99
1

Indexa 40mmx125mmx500mm Ground Flat Stock

Indexa 40mmx125mmx500mm Ground Flat Stock

Precision ground flat stock supplied as W1.2510 - 01 Tool Steel (100MnCrW1), in a wide range of Metric sizes. Oil hardening gauge plate supplied in annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. An excellent general purpose grade. Applications include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also used in applications such as cams, cloth cutters, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking cutters, collets, cutting hobs and strip slitting cutters. Top & bottom surfaces supplied in ground condition. Both ends supplied sawn cut. Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long. Tolerances Thickness: -0/+.002" Width: -0/+.008" Length: -0/+.197" Square Bars: -0/+.002" Material Specification DIN Grade..1.2510 (100MnCrW1) Nearest AISI Standard 01 Hardness 230 HB Surface Roughness max. 3.2m Chemical Composition C Carbon 0.90 - 1.05% Si Silicon .............. 0.15 - 0.35% Mn Manganese 1.00 - 1.20% Cr Chromium . 0.50 - 0.70% V Vanadium 0.05 - 0.15% W Tungsten 0.50 - 0.70% P Phosphorous max. 0.035% S Sulphur max. 0.035% Inch - Preferred Size List Generally available from stock. All sizes listed are 18" long.

GBP 169.99
1