2.527 results (0,13622 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

MK2 Renault Clio 172/182 Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK2 Renault Clio 172/182 Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Our roll cages are made from E355+N as standard, providing maximum protection in the event of a roll. Along with our unique X bracing, harness bars and gusseting, this Renault Clio roll cage meets The Motorsport UK Blue Book Specifications, so you know you’re getting the best protection possible. The Renault Clio MK2 roll cage is available in a range of colours to suit your car, so you can get the look you want, without the cost.      

GBP 819.00
1

MK7 Ford Fiesta Half Cage (Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK7 Ford Fiesta Half Cage (Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 819.00
1

MK2 Renault Clio 172/182 Half Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK2 Renault Clio 172/182 Half Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Our roll cages are made from E355+N as standard, providing maximum protection in the event of a roll. Along with our unique X bracing, harness bars and gusseting, this Renault Clio roll cage meets The Motorsport UK Blue Book Specifications, so you know you’re getting the best protection possible. The Renault Clio MK2 roll cage is available in a range of colours to suit your car, so you can get the look you want, without the cost.      

GBP 756.00
1

MK2 Renault Clio 172/182 Half Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK2 Renault Clio 172/182 Half Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Our roll cages are made from E355+N as standard, providing maximum protection in the event of a roll. Along with our unique X bracing, harness bars and gusseting, this Renault Clio roll cage meets The Motorsport UK Blue Book Specifications, so you know you’re getting the best protection possible. The Renault Clio MK2 roll cage is available in a range of colours to suit your car, so you can get the look you want, without the cost.      

GBP 844.20
1

MK7 Ford Fiesta Half Cage (Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK7 Ford Fiesta Half Cage (Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 945.00
1

MK7 Ford Fiesta Half Cage (Colour: Unpainted, Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK7 Ford Fiesta Half Cage (Colour: Unpainted, Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 756.00
1

MK2 Renault Clio 172/182 Half Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK2 Renault Clio 172/182 Half Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Our roll cages are made from E355+N as standard, providing maximum protection in the event of a roll. Along with our unique X bracing, harness bars and gusseting, this Renault Clio roll cage meets The Motorsport UK Blue Book Specifications, so you know you’re getting the best protection possible. The Renault Clio MK2 roll cage is available in a range of colours to suit your car, so you can get the look you want, without the cost.      

GBP 869.40
1

MK7 Ford Fiesta Half Cage (Colour: Specific RAL, Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK7 Ford Fiesta Half Cage (Colour: Specific RAL, Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 844.20
1

MK7 Ford Fiesta Half Cage (Colour: Unpainted, Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK7 Ford Fiesta Half Cage (Colour: Unpainted, Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 882.00
1

MK7 Ford Fiesta Half Cage (Colour: Specific Metallic RAL, Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competitio

MK7 Ford Fiesta Half Cage (Colour: Specific Metallic RAL, Design Options: JPC0.5 ( X Rear ), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competitio

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 869.40
1

MK7 Ford Fiesta Half Cage (Colour: Specific RAL, Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition

MK7 Ford Fiesta Half Cage (Colour: Specific RAL, Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 970.20
1

MK7 Ford Fiesta Half Cage (Colour: Specific Metallic RAL, Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for co

MK7 Ford Fiesta Half Cage (Colour: Specific Metallic RAL, Design Options: JPC1 (Xrear and X Centre), Material: LIGHTWEIGHT BS4-T45 - Unapproved for co

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours! We use only the best materials for our cages. ​Not For Competition use Fitting: This cage requires removal of one door and the centre console with gear select removed. After removal of these the rest of the car can remain intact.. Trims, headlining, carpet etc.. simply manoeuvre the cage through the door then lift it into position over the rear arches. No welding required. Using the spreader plates provided to bolt the feet through the floor pan and arch skin.

GBP 995.40
1

BMW Z4 Half Cage Kit | DIY Weld-In Roll Cage for Track & Motorsport (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

BMW Z4 Half Cage Kit | DIY Weld-In Roll Cage for Track & Motorsport (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

🔧 BMW Z4 DIY Half Cage Kit – Motorsport-Ready Performance & Safety! Upgrade your BMW Z4 Coupe with our DIY Half Cage Kit, designed to reinforce chassis strength, enhance safety, and optimise track performance. Whether you’re a serious racer or a weekend track enthusiast, this precision-crafted roll cage delivers superior reinforcement without unnecessary weight. To install this cage, the rear bulkhead must be fully removed. This modification allows for a secure and seamless fit, ensuring optimal rigidity for track applications. 🔹 High-Performance Design & Construction Our BMW Z4 Half Cage Kit is engineered for motorsport performance, incorporating key reinforcements to improve both chassis stiffness and driver protection. ✔ X-Centre & X-Rear Bracing – Strengthens the chassis for enhanced track handling ✔ Harness Bar Hoop – Positioned behind the centre cross for optimal seat clearance ✔ B-Pillar Gussets & Mounts – Ensures a rigid and professional installation 💡 Designed for BMW Z4 Coupe owners looking for the ultimate track-ready roll cage solution! 🔹 Choose Your Material – T45 or CDS Steel We offer two steel options, allowing you to customise your half cage to match your performance needs. 📌 T45 Steel – Motorsport-Grade, Lightweight & Strong ✔ Aerospace-grade BS4-T45 steel with superior tensile strength ✔ Curved gussets for a sleek, high-performance look ✔ Lighter than CDS steel, making it the ideal choice for serious racers 📌 Standard CDS (E355+N) – Durable & Cost-Effective ✔ Cold Drawn Seamless (CDS) tubing for maximum durability ✔ Includes traditional straight taco gussets with precision-cut holes ✔ Reliable and affordable option for track day enthusiasts 💡 T45 is the best choice for weight savings & extreme durability, while CDS provides excellent reinforcement at a lower cost. 🔹 Precision Fit & DIY Installation Our BMW Z4 DIY Half Cage Kit is CNC-notched, pre-marked, and labeled, ensuring perfect alignment and hassle-free assembly. 🔧 Installation Overview: 1️⃣ Completely remove the rear bulkhead (required for proper fitment) 2️⃣ Position & tack weld the mounting plates in place 3️⃣ Assemble & align the X-bracing and harness bar 4️⃣ Ensure clearance and weld all structural points securely 5️⃣ Perform final checks to confirm proper fitment and reinforcement 📌 This is a weld-in kit designed for professional fabricators & experienced DIYers. Advanced welding and fabrication skills are required. 🔹 Why Choose JP Cages for Your BMW Z4 Roll Cage? When it comes to motorsport-grade roll cages, JP Cages leads the way in precision engineering and structural integrity. ✔ Designed for Track & Race Performance – Engineered for maximum safety ✔ Precision CNC Notching – Ensures seamless fitment & structural strength ✔ Customisable Steel Options – Available in T45 & CDS (E355+N) Tubing ✔ Trusted by Motorsport Enthusiasts – Built by JP Cages, the UK’s leading roll cage specialists ✔ Fast Worldwide Shipping – Secure delivery to track builders worldwide 💡 For complete safety compliance, our roll cages adhere to MSUK Blue Book Regulations for club-level motorsport. 🔹 Related Products & Internal Links ✔ Browse our full BMW Roll Cage Collection to find the perfect safety upgrade for your build. 🔹 Frequently Asked Questions (FAQs) ❓ Does this cage fit all BMW Z4 models? ✅ This kit is specifically designed for BMW Z4 Coupe models. For compatibility with convertibles, please contact us before ordering. ❓ What is the difference between T45 and CDS steel? ✅ T45 steel

GBP 630.00
1

Peugeot 205 Rear Half Roll Cage – Track & Motorsport Ready (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Peugeot 205 Rear Half Roll Cage – Track & Motorsport Ready (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

🔧 Peugeot 205 Rear Half Roll Cage – Motorsport-Ready Protection & Performance! Enhance your Peugeot 205 for track days, Targa rallies, hill climbs, and sprints with our high-strength rear half roll cage. Designed for events not requiring a full MSUK roll cage, this motorsport-grade reinforcement improves chassis rigidity while providing crucial driver protection. Whether you’re a competitive racer or a track day enthusiast, this precision-built half cage offers added security and structure, allowing you to push your 205 to its limits with confidence. 🔹 Built for Performance – Engineered for Safety ✔ Track-Ready Design – Perfect for track days, production Targa rallies, hill climbs, and sprints ✔ X-Brace Centre Section – Reinforces the rear chassis for maximum rigidity ✔ Integrated Harness Bars – Provides a secure mounting point for race harnesses ✔ MSUK-Spec Mounting Plates – Supplied for welding into place for a secure installation ✔ Powder-Coated Finish – Available in a range of custom colours to match your build ✔ Seamless Integration – Designed to fit all Peugeot 205 models with precision 💡 Not competing? This cage is also a great safety and handling upgrade for track-day builds and performance road cars. 🔹 Precision Fit & Motorsport-Grade Construction This Peugeot 205 Rear Half Roll Cage is precision-engineered for strength and reliability, ensuring it performs under high-stress conditions. ✔ CNC-Bent Tubing – Provides a precise and tight fit ✔ X-Brace Design – Adds torsional stiffness to improve handling ✔ High-Strength Steel – Built for safety and longevity ✔ Fully Bolt-In Cage – Mounts to MSUK-spec welded plates for superior stability 💡 Want a full roll cage? Check out our Peugeot 205 Full Weld-In Roll Cage Kit for complete chassis protection. 🔹 Installation & Fitment Guide Our Peugeot 205 Rear Half Roll Cage is designed for straightforward installation but requires welding of MSUK-compliant mounting plates. 🔧 Installation Overview: 1️⃣ Prepare the rear interior – Remove trim & clean mounting areas 2️⃣ Weld the MSUK-spec mounting plates to the chassis for reinforcement 3️⃣ Position the roll cage onto the welded mounts 4️⃣ Secure & bolt the cage into place 5️⃣ Final alignment checks – Ensure proper fitment and clearance 📌 Professional installation is recommended to ensure the best fit and compliance with motorsport safety regulations. 🔹 Why Choose JP Cages for Your Peugeot 205 Roll Cage? ✔ Motorsport-Grade Engineering – Designed for competitive racing & track use ✔ Precision CNC Manufacturing – Ensures a perfect fit every time ✔ Trusted by Motorsport Enthusiasts – JP Cages is the UK’s leading roll cage manufacturer ✔ Custom Colour Options – Powder-coated finishes available for a unique look ✔ Fast & Secure Worldwide Shipping – Trusted by racers & track day drivers worldwide 💡 Need harnesses, or additional safety upgrades? Check out our  Motorsport Accessories for everything you need. 🔹 Related Products & Internal Links ✔ Need a Competition ready alternative? Check out our PEUGEOT 205 BOLT IN COMPETITION ROLL CAGE for easy installation. ✔ Browse our Peugeot Roll Cage Collection to find the perfect safety upgrade. ✔ Learn more about roll cage regulations with the MSUK Blue Book Regulations for full compliance details. 🚀 Order Your Peugeot 205 Rear Half Roll Cage Today! Upgrade your Peugeot 205 with a race-ready rear half roll cage designed for strength, safety, and performance. Whether you’re hitt

GBP 819.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC1.5 (sing

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC1.5 (sing

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1002.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC2 - Singl

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC2 - Singl

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1134.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC4 - X REA

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC4 - X REA

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1418.40
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC3 - X rea

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC3 - X rea

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1323.60
1

Peugeot 205 Rear Half Roll Cage – Track & Motorsport Ready (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Peugeot 205 Rear Half Roll Cage – Track & Motorsport Ready (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

🔧 Peugeot 205 Rear Half Roll Cage – Motorsport-Ready Protection & Performance! Enhance your Peugeot 205 for track days, Targa rallies, hill climbs, and sprints with our high-strength rear half roll cage. Designed for events not requiring a full MSUK roll cage, this motorsport-grade reinforcement improves chassis rigidity while providing crucial driver protection. Whether you’re a competitive racer or a track day enthusiast, this precision-built half cage offers added security and structure, allowing you to push your 205 to its limits with confidence. 🔹 Built for Performance – Engineered for Safety ✔ Track-Ready Design – Perfect for track days, production Targa rallies, hill climbs, and sprints ✔ X-Brace Centre Section – Reinforces the rear chassis for maximum rigidity ✔ Integrated Harness Bars – Provides a secure mounting point for race harnesses ✔ MSUK-Spec Mounting Plates – Supplied for welding into place for a secure installation ✔ Powder-Coated Finish – Available in a range of custom colours to match your build ✔ Seamless Integration – Designed to fit all Peugeot 205 models with precision 💡 Not competing? This cage is also a great safety and handling upgrade for track-day builds and performance road cars. 🔹 Precision Fit & Motorsport-Grade Construction This Peugeot 205 Rear Half Roll Cage is precision-engineered for strength and reliability, ensuring it performs under high-stress conditions. ✔ CNC-Bent Tubing – Provides a precise and tight fit ✔ X-Brace Design – Adds torsional stiffness to improve handling ✔ High-Strength Steel – Built for safety and longevity ✔ Fully Bolt-In Cage – Mounts to MSUK-spec welded plates for superior stability 💡 Want a full roll cage? Check out our Peugeot 205 Full Weld-In Roll Cage Kit for complete chassis protection. 🔹 Installation & Fitment Guide Our Peugeot 205 Rear Half Roll Cage is designed for straightforward installation but requires welding of MSUK-compliant mounting plates. 🔧 Installation Overview: 1️⃣ Prepare the rear interior – Remove trim & clean mounting areas 2️⃣ Weld the MSUK-spec mounting plates to the chassis for reinforcement 3️⃣ Position the roll cage onto the welded mounts 4️⃣ Secure & bolt the cage into place 5️⃣ Final alignment checks – Ensure proper fitment and clearance 📌 Professional installation is recommended to ensure the best fit and compliance with motorsport safety regulations. 🔹 Why Choose JP Cages for Your Peugeot 205 Roll Cage? ✔ Motorsport-Grade Engineering – Designed for competitive racing & track use ✔ Precision CNC Manufacturing – Ensures a perfect fit every time ✔ Trusted by Motorsport Enthusiasts – JP Cages is the UK’s leading roll cage manufacturer ✔ Custom Colour Options – Powder-coated finishes available for a unique look ✔ Fast & Secure Worldwide Shipping – Trusted by racers & track day drivers worldwide 💡 Need harnesses, or additional safety upgrades? Check out our  Motorsport Accessories for everything you need. 🔹 Related Products & Internal Links ✔ Need a Competition ready alternative? Check out our PEUGEOT 205 BOLT IN COMPETITION ROLL CAGE for easy installation. ✔ Browse our Peugeot Roll Cage Collection to find the perfect safety upgrade. ✔ Learn more about roll cage regulations with the MSUK Blue Book Regulations for full compliance details. 🚀 Order Your Peugeot 205 Rear Half Roll Cage Today! Upgrade your Peugeot 205 with a race-ready rear half roll cage designed for strength, safety, and performance. Whether you’re hitt

GBP 756.00
1

Bespoke service Deposit (Design Options: JPC5 - JPC4 with X roof, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Bespoke service Deposit (Design Options: JPC5 - JPC4 with X roof, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Pre-book your bespoke service here! Take a look through our bespoke design options found here: Bespoke Designs   You can alter any of the designs to suit your requirements, the prices are based on the vehicle coming ready to work on! with approx 10 working day turnaround!   Please leave any specific requirments or changes in the notes, we can discuss and commit to any of these requirments when you drop the car off!    

GBP 1724.32
1

Bespoke service Deposit (Design Options: JPC4.5 - JPC4 with Diagonal roof, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Bespoke service Deposit (Design Options: JPC4.5 - JPC4 with Diagonal roof, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Pre-book your bespoke service here! Take a look through our bespoke design options found here: Bespoke Designs   You can alter any of the designs to suit your requirements, the prices are based on the vehicle coming ready to work on! with approx 10 working day turnaround!   Please leave any specific requirments or changes in the notes, we can discuss and commit to any of these requirments when you drop the car off!    

GBP 1669.38
1

Renault Twingo Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Renault Twingo Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.     These are available powder coated in a range of colours!

GBP 819.00
1

Ford Puma Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Ford Puma Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.     These are available powder coated in a range of colours!

GBP 819.00
1

MK3 Fiat Punto Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK3 Fiat Punto Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one.   Supplied with weld in track spec mounts and bolts.   These are available powder coated in a range of colours!

GBP 850.50
1

Mini R55 Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Mini R55 Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. This cage follows The Motorsport UK Blue Book Specifications and has an approximate weight of 24KG These are available powder coated in a range of colours! The cage is Direct fit at the rear with drill and bolt fitment through the floorpan – NO WELDING REQUIRED! Fitting available!  

GBP 819.00
1