ProfitSpring | B2B PPC Agency

Peugeot 306 Half Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 945.00

1

MK2 Ford Focus ST Half Cage (Colour: Specific RAL, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 667.80

1

Peugeot 306 Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 919.80

1

MK2 Ford Focus ST Half Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 819.00

1

Peugeot 306 Half Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 856.80

1

Peugeot 306 Half Cage (Colour: Unpainted, Material: Standard CDS)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 604.80

1

Peugeot 306 Half Cage (Colour: Specific RAL, Material: Standard CDS)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 781.20

1

MK2 Ford Focus ST Half Cage (Colour: Specific Metallic RAL, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 718.20

1

MK2 Ford Focus ST Half Cage (Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 567.00

1

MK2 Ford Focus ST Half Cage (Colour: Unpainted, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 504.00

1

Peugeot 306 Half Cage (Material: Standard CDS)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 667.80

1

MK2 Ford Focus ST Half Cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 844.20

1

MK2 Ford Focus ST Half Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 869.40

1

Peugeot 306 Half Cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 982.80

1

MK2 Ford Focus ST Half Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bar and gusseting. No welding required Direct bolt in at the rear with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. These are available powder coated in a range of colours!

GBP 756.00

1

Peugeot 306 Half Cage (Colour: Specific Metallic RAL, Material: Standard CDS)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required, however the spreader plates could be welded on the inside if prefered! Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Available in a wide range of colours! Fitting available!

GBP 819.00

1

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1197.00

1

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1171.80

1

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1423.80

1

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 945.00

1

MK3 Audi TT Clubsport half cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1260.00

1

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1373.40

1

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1121.40

1

MK3 Audi TT Clubsport half cage (Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. Available in a range of colours Available in CDS or lightweight T45

GBP 1008.00

1

Hyundai I30N Half Cage (Harness Bar: NO, Material: Standard CDS)

This is a 2 piece track day spec cage perfect for track day use on a budget! Perfect for casual track days at low cost. This Design utilises ‘X’ Bracing and gusseting with FIA approved lap joints which join the rear section allowing for easy removal and fitting. No welding required. Direct bolt in at the rear incorporated into the OEM rear strut brace mounts with drilling required at the front legs to bolt through the floor into spreader plates provided. This cage follows The Motorsport UK Blue Book Specifications. This cage has an approximate weight of 21KG Variations and additional bracing are available on request. Available in a wide range of colours! Fitting available! These are made to order, please allow up to 10 working days for dispatch!