ProfitSpring | B2B PPC Agency

KAC M1A-Y470SG-K013-11 Yellow Surface Mounted Manual Call Point

Please note This product is now obsolete the recommended alternative is theMorley M1A-Y470SF-K013-11 Yellow Conventional Manual Call Point - Surface Mounted - Flexible Element.KAC M1A-Y470SG-K013-11 Yellow Surface Mounted Manual Call PointA yellow surface mounted manual call point supplied with surface mounting backbox.Key FeaturesSurface mounted

GBP 16.72

1

KAC PTR Low Profile Surface Mounting Patress Box - Red

KAC PTR Low Profile Surface Mounting Patress Box - RedThe PTR is a red low profile surface mounting patress box.This call point pattress is a great deal more than an alternative to a surface mounting box although this is its primary purpose. designed to accept installation cables that enter the device without the use of bulky cable terminations.Key FeaturesColour Red

GBP 3.26

1

KAC KAC-CPKEYS Call Point Test Key Pack of 10

KACKAC-CPKEYS Call Point Test Key Pack of 10The KAC Call point Test Key is designed for use with all versions of the KAC type call point. It allows the user to carry out a test on the call point or in the event of an activation to reset the call point providing it has the resettable element.Key FeaturesUsed for testing resetting and changing the call point operating elementIdeal to keep as spares in case of loss or multiple responsible personnelSold in packs of 10

GBP 5.88

1

KAC WBK20S11-SB Key Switch Call Point Blue - 2 Position - SPole - Key Removable

KAC WBK20S11-SB Key Switch Call Point Blue - 2 Position - SPole - Key RemovableThe KAC range of key switch devices provide a comprehensive selection of switching product solutions for fire security and other specialist applications.Flexible InstallationThe KAC range of key switch devices provide a comprehensive selection of switching product solutions for fire security and other specialist applications.All products comprise a main housing and escutcheon plate.Key FeaturesColour Blue2 PositionSPoleKey RemovableReduced Full Life CostsRobust long-life key and barrelLocknut washer keyway featureBroad temperature toleranceExcellent System PerformanceKACs world renowned reliability and quality3-year warrantyRigorous testing and validation

GBP 24.64

1

KAC M1A-R470FG-H002-01 Break Glass Call Point - Red - 470 Ohm Flush

KAC M1A-R470FG-H002-01 Break Glass Call Point - Red - 470 Ohm FlushA break glass call point designed for flush mounting.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link P102 to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit. No re-termination is required.Key FeaturesColour red470 OhmFlush mountConventional

GBP 8.75

1

KAC WBK21S11-SB Key Switch Call Point Blue - 2 Position - SPole - Key Trap In Pos 1

KAC WBK21S11-SB Key Switch Call Point Blue - 2 Position - SPole - Key Trap In Pos 1The KAC range of key switch devices provide a comprehensive selection of switching product solutions for fire security and other specialist applications.Flexible InstallationThe KAC range of key switch devices provide a comprehensive selection of switching product solutions for fire security and other specialist applications.All products comprise a main housing and escutcheon plate.Key FeaturesColour Blue2 PositionSPoleKey Trap in Pos 1Reduced Full Life CostsRobust long-life key and barrelLocknut washer keyway featureBroad temperature toleranceExcellent System PerformanceKACs world renowned reliability and quality3-year warrantyRigorous testing and validation

GBP 24.64

1

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - Green

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - GreenInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Pointrange.Installation time and ultimately cost are of paramount importance to any fire or securityinstaller. The MCP range directly reflects this need by providing a unique plug and playconcept designed specifically to reduce installation time. All new MCP products utilisea special terminal block where all initial installation cabling is terminated. This terminalblock is then simply connected to the back of the MCP. Simple but effective with nore-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manualcall point. To provide you with the greatest flex-ability the new MCP range can beconfigured as either a break glass or resettable unit by simply changing from one elementto another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall systemas illegal removal of the product lid will result in the call point operating and the systemgoing in to alarm.Key FeaturesColour Green

GBP 13.97

1

KAC M4A-Y000SF-K013-11 Yellow Double Pole Manual Call Point - Surface Glass Indoor

KAC M4A-Y000SF-K013-11 Yellow Double Pole Manual Call Point -Surface Glass IndoorInstallation efficiency and flexibility are at the heart ofthe new MCP Indoor Call Point range.Installation time and ultimately cost are of paramountimportance to any fire or security installer. The MCP range directly reflectsthis need by providing a unique plug and play concept designed specificallyto reduce installation time. All new MCP products utilise a special terminalblock where all initial installation cabling is terminated. This terminal blockis then simply connected to the back of the MCP. Simple but effective with no re-terminationrequired and no time wasted.Both break glass and resettable operating elements can nowbe used within a manual call point. To provide you with the greatestflex-ability the new MCP range can be configured as either a break glass orresettable unit by simply changing from one element to another. No otheradditional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve theintegrity of the overall system as illegal removal of the product lid willresult in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double polechangeover set of contacts. The product utilises two terminal blocks and wiringto the relevant terminals on these terminal connector blocks provides either anormally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 27.73

1

KAC M4A-B000SF-K013-11 Blue Double Pole Surface Flexible Element Indoor Manual Call Point With Plain Marking

KAC M4A-B000SF-K013-11 Blue Double Pole Surface Flexible Element Indoor Manual Call Point With Plain MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 27.73

1

KAC M4A-W000SG-K013-12 White Double Pole Surface Glass Indoor Manual Call Point With Emergency Door Release Marking

KAC M4A-W000SG-K013-12 White Double Pole Surface Glass Indoor Manual Call Point With Emergency Door Release MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 39.31

1

KAC W4A-G000SG-K013-11 Green Double Pole Surface Break Glass Outdoor Manual Call Point Plain Marking

KAC W4A-G000SG-K013-11 Green Double Pole Surface Break Glass Outdoor Manual Call Point Plain MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 96.01

1

KAC W1A-R680SG-K013-01 Red Surface Break Glass House Flame Outdoor Manual Call Point - 680 Ohm

KAC W1A-R680SG-K013-01 Red Surface Break Glass House Flame Outdoor Manual Call Point - 680 OhmInstallation efficiency flexibility and full compliancewith the latest standards are at the heart of the new WCP Outdoor Call Pointrange.The outdoor WCP is an IP67 sealed manual call point product.The enhanced environmental protection allows the unit to be installed in manyexternal environments where water and dirt are likely to be present making ita true waterproof and outdoor product.Installation time and ultimately cost are of paramountimportance to any fire or security installer. The WCP range directly reflects this need by providing aunique plug and play concept designed specifically to reduce installationtime. All new WCP products utilise a special terminal block where all initialinstallation cabling is terminated. This terminal block is then simplyconnected to the back of the WCP. Simple but effective with no re-termination requiredand no time wasted. In addition all WCP products are supplied with threestandard 20mm threaded cable entries accommodating all types of surface wiringinstallations.Through new standards and legislation both break glass andre-settable operating elements can now be used within a manual call point. Toprovide you with the greatest flex-ability the new WCP range can beconfigured as either a break glass or re-settable unit by simply changing fromone element to another. No other additional parts or alternative products need tobe ordered.All WCP Outdoor Call Point products also help preserve theintegrity of the overall system as illegal removal of the product lid willresult in the call point operating and the system going in to alarm.Key FeaturesFully approved to the latest standardsBackward compatibilityEnhanced aesthetics

GBP 75.07

1

KAC W1A-R470SF-K013-01 Weatherproof Manual Call Point with Flexi-Glass - 470 ohm - Surface Mount - Red

KAC W1A-R470SF-K013-01 Weatherproof Manual Call Point withFlexi-Glass - 470 ohm - Surface Mount - RedInstallation efficiency flexibility and full compliancewith the latest standards are at the heart of the new WCP Outdoor Call Pointrange.The outdoor WCP is an IP67 sealed manual call point product.The enhanced environmental protection allows the unit to be installed in manyexternal environments where water and dirt are likely to be present making ita true waterproof and outdoor product.Installation time and ultimately cost are of paramountimportance to any fire or security installer. The WCP range directly reflects this need by providing aunique plug and play concept designed specifically to reduce installationtime. All new WCP products utilise a special terminal block where all initialinstallation cabling is terminated. This terminal block is then simplyconnected to the back of the WCP. Simple but effective with no re-termination requiredand no time wasted. In addition all WCP products are supplied with threestandard 20mm threaded cable entries accommodating all types of surface wiringinstallations.Through new standards and legislation both break glass andre-settable operating elements can now be used within a manual call point. Toprovide you with the greatest flex-ability the new WCP range can beconfigured as either a break glass or re-settable unit by simply changing fromone element to another. No other additional parts or alternative products need tobe ordered.All WCP Outdoor Call Point products also help preserve theintegrity of the overall system as illegal removal of the product lid willresult in the call point operating and the system going in to alarm.Key FeaturesFully approved to the latest standardsBackward compatibilityEnhanced aesthetics

GBP 72.50

1

KAC W4A-R000SG-K013-01 Red Double Pole Surface Break Glass Outdoor Manual Call Point House Flame Marking

KAC W4A-R000SG-K013-01 Red Double Pole Surface Break Glass Outdoor Manual Call Point House Flame MarkingInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 72.90

1

KAC M4A-G000SF-STCK-12 Green Double Pole Surface Flexible Element Indoor Manual Call Point With Emergency Door Release Marking

KAC M4A-G000SF-STCK-12 Green Double Pole Surface Flexible Element Indoor Manual Call Point With Emergency Door Release MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation see wiring diagram overleaf.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics

GBP 27.73

1

KAC M3A-W000SG-STCK-12 White Normally OpenNormally Close NONC Contact Model Manual Call Point With Emergency Door Release Marking

KAC M3A-W000SG-STCK-12 White Normally OpenNormally Close NONC Contact Model Manual Call Point With Emergency Door Release MarkingInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocksKey FeaturesSurface mountGlass elementEmergency Door Release Markings

GBP 18.58

1

KAC M3A-Y000SG-K013-65 Yellow Normally OpenNormally Close NONC Contact Model Indoor Manual Call Point With Manual Release Gas Extinguishing System

KAC M3A-Y000SG-K013-65 Yellow Normally OpenNormally Close NONC Contact Model Surface Glass Indoor Manual Call Point With Manual Release Gas Extinguishing System Marking And Hinge CoverInstallation efficiency and flexibility are at the heart of the new MCP Indoor Call Point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocksKey FeaturesSurface mountGlass elementManual Release Gas Extinguishing System MarkingYellow colour

GBP 24.70

1

KAC W1A-R470SF-K013-81 Weatherproof Manual Call Point with Flexi-Glass - 470 ohm - Surface Mount - Red - ATEX EX Approved - Intrinsically Safe

KAC W1A-R470SF-K013-81 Weatherproof Manual Call Point with Flexi-Glass - 470 ohm - Surface Mount - Red - ATEX EX Approved - Intrinsically SafeInstallation efficiency flexibility and full compliancewith the latest standards are at the heart of the new WCP Outdoor Call Pointrange.The outdoor WCP is an IP67 sealed manual call point product.The enhanced environmental protection allows the unit to be installed in manyexternal environments where water and dirt are likely to be present making ita true waterproof and outdoor product.Installation time and ultimately cost are of paramountimportance to any fire or security installer. The WCP range directly reflects this need by providing aunique plug and play concept designed specifically to reduce installationtime. All new WCP products utilise a special terminal block where all initialinstallation cabling is terminated. This terminal block is then simplyconnected to the back of the WCP. Simple but effective with no re-termination requiredand no time wasted. In addition all WCP products are supplied with threestandard 20mm threaded cable entries accommodating all types of surface wiringinstallations.Through new standards and legislation both break glass andre-settable operating elements can now be used within a manual call point. Toprovide you with the greatest flex-ability the new WCP range can beconfigured as either a break glass or re-settable unit by simply changing fromone element to another. No other additional parts or alternative products need tobe ordered.All WCP Outdoor Call Point products also help preserve theintegrity of the overall system as illegal removal of the product lid willresult in the call point operating and the system going in to alarm.Key FeaturesFully approved to the latest standardsBackward compatibilityEnhanced aesthetics

GBP 93.64

1

KAC MCP4A-R-SR Red Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-R-SR Red Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 31.56

1

KAC MCP4A-B-SB Blue Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-B-SB Blue Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 35.94

1

KAC MCP4A-W-SW White Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-W-SW White Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 32.91

1

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470Ohm

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470OhmThe MCP1A-R-470-SR-IS is a Red Intrinsically Safe Call Point.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.Key FeaturesColour Red470OhmUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibility

GBP 14.01

1

KAC MCP4A-G-SG Green Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-G-SG Green Break Glass Call Point - Double Pole - NONC SurfaceInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP4A product version is supplied with a double pole changeover set of contacts. The product utilises two terminal blocks and wiring to the relevant terminals on these terminal connector blocks provides either a normally open or normally closed operation.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 21.43

1

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM Resettable

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM ResettableThe MCP1A-Y-AOV is a Yellow Smoke Vent Manual Call Point designed for use with the KAC Automatic Opening Vent Control Systems.There are manual override switches which are used to open and close smoke systems and can be used alongside KAC smoke control panels. This unit is supplied with a resettable non-glass element which allows the call point to be reset much quicker than conventional glass elements.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard Compliant markings only.Key FeaturesColour YellowLabelled Smoke VentSuitable for use with KAC AOV control panels

GBP 16.20

1

KAC M3A-Y000SF-K013-11 MCP3A Call Point - Yellow - NONC - Surface - fe1140-plain

KAC M3A-Y000SF-K013-11 MCP3A Call Point - Yellow - NONC - Surface - fe1140-plainInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 22.40

1

Brand

Merchant

Price (EUR)

KAC M1A-Y470SG-K013-11 Yellow Surface Mounted Manual Call Point

KAC PTR Low Profile Surface Mounting Patress Box - Red

KAC KAC-CPKEYS Call Point Test Key Pack of 10

KAC WBK20S11-SB Key Switch Call Point Blue - 2 Position - SPole - Key Removable

KAC M1A-R470FG-H002-01 Break Glass Call Point - Red - 470 Ohm Flush

KAC WBK21S11-SB Key Switch Call Point Blue - 2 Position - SPole - Key Trap In Pos 1

KAC M3A-GC01SF-K013-12 Single Pole Changeover Contact Call Point - Green

KAC M4A-Y000SF-K013-11 Yellow Double Pole Manual Call Point - Surface Glass Indoor

KAC M4A-B000SF-K013-11 Blue Double Pole Surface Flexible Element Indoor Manual Call Point With Plain Marking

KAC M4A-W000SG-K013-12 White Double Pole Surface Glass Indoor Manual Call Point With Emergency Door Release Marking

KAC W4A-G000SG-K013-11 Green Double Pole Surface Break Glass Outdoor Manual Call Point Plain Marking

KAC W1A-R680SG-K013-01 Red Surface Break Glass House Flame Outdoor Manual Call Point - 680 Ohm

KAC W1A-R470SF-K013-01 Weatherproof Manual Call Point with Flexi-Glass - 470 ohm - Surface Mount - Red

KAC W4A-R000SG-K013-01 Red Double Pole Surface Break Glass Outdoor Manual Call Point House Flame Marking

KAC M4A-G000SF-STCK-12 Green Double Pole Surface Flexible Element Indoor Manual Call Point With Emergency Door Release Marking

KAC M3A-W000SG-STCK-12 White Normally OpenNormally Close NONC Contact Model Manual Call Point With Emergency Door Release Marking

KAC M3A-Y000SG-K013-65 Yellow Normally OpenNormally Close NONC Contact Model Indoor Manual Call Point With Manual Release Gas Extinguishing System

KAC W1A-R470SF-K013-81 Weatherproof Manual Call Point with Flexi-Glass - 470 ohm - Surface Mount - Red - ATEX EX Approved - Intrinsically Safe

KAC MCP4A-R-SR Red Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-B-SB Blue Break Glass Call Point - Double Pole - NONC Surface

KAC MCP4A-W-SW White Break Glass Call Point - Double Pole - NONC Surface

KAC MCP1A-R-470-SR-IS Red Intrinsically Safe Call Point - Surface - 470Ohm

KAC MCP4A-G-SG Green Break Glass Call Point - Double Pole - NONC Surface

KAC MCP1A-Y-AOV Yellow Smoke Vent Manual Call Point - 470OHM Resettable

KAC M3A-Y000SF-K013-11 MCP3A Call Point - Yellow - NONC - Surface - fe1140-plain

Powered by Cobiro