52 results (0,20246 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Kennedy Wire Insert Thread Repair Kit M7.0 x 1.00mm

Kennedy Wire Insert Thread Repair Kit M7.0 x 1.00mm

Suitable for repairing damaged and worn threads as well as being useful for new applications, these wire thread insert kits are ideal for use with alloys and other light materials. Each kit can also be used for converting from metric to imperial and vice versa. Insert lengths are 1.5D as standard and each kit is supplied with inserts, HSS hand tap, insertion tool, drill bits and punches* and instructions. Supplied in a red, moulded plastic case for storage. Features and Benefits Available in a variety of metric and imperial sizes to suit your needs Can either be used to repair damaged threads or converting from imperial to metric or vice versa for versatility of use Kit is supplied with inserts as well as HSS hand tap, insertion tool and instructions to get you working immediately Supplied in a robust plastic case with moulded handle for easy organisation, storage and transportation of your tools Drills & Punches Included (M12,M14 and M16 in range do not include drill bit) Contents 10 x inserts HSS Hand Tap Insertion Tool Typical Applications Engineering DIY Construction Notes *M12,M14 and M16 in range do not include drill bit

GBP 27.99
1

Kennedy 16 Piece Electrician's VDE Tool Bag & Kit

Kennedy 16 Piece Electrician's VDE Tool Bag & Kit

Heavy duty tear-resistant tool bag with Hook-n-Loop fastening flap. Double webbed shoulder strap fixed with metal release clasps. Two removable tool boards inside which have a unique tool storage securing system built in. All tools are VDE approved. Contents: Electrician's tool bag (320 x 340 x 125mm). 150mm euro tester will detect 'live' electricity supply. Suitable for AC to 125 - 250V, 3mm wide tip. Conform to VDE 0630 Part 4. 145mm (53/4") Pro-Torq grip diagonal nippers, 1000V insulated. 160mm (63/8") Pro-Torq snipe nose pliers, 1000V insulated. 165mm (61/2") Pro-Torq engineer's combination pliers, 1000V insulated. 170mm (63/4") Pro-Torq wire strippers, 1000V insulated. 7 piece VDE dual grip screwdriver set: No.0 x 60, No.1 x 80 and No.2 x 100mm, 2.5 x 75, 4.0 x 100, 5.5 x 125 and 6.5 x 150mm. 180mm (7") insulated cable knife, curved blade. 2x small parts storage boxes.

GBP 99.99
1

Kennedy Wire Insert Thread Repair Kit M14 x 2.00mm

Kennedy Wire Insert Thread Repair Kit M14 x 2.00mm

Single size economic Thread Repair Kits include a plain mandrel screwdriver inserting tool, high speed steel wire insert tap, and a quantity of 5 free running inserts. Clearance Drills and Manual Tang Break Punches are NOT included in these kits M14 x 1.25mm - Clearance Drill 14.25mm. M14 x 1.50mm - Clearance Drill 14.25mm. M14 x 2.00mm - Clearance Drill 14.50mm. M16 x 1.50mm - Clearance Drill 16.50mm. M16 x 2.00mm - Clearance Drill 16.50mm.

GBP 62.99
1

Kennedy 3X6MM Flame Shape Carbide Burr Cut 9

Kennedy 3X6MM Flame Shape Carbide Burr Cut 9

Flame Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 2.54
1

Kennedy 16X25MM Cylindrical Carbide Ball Nose Burr Cut 9

Kennedy 16X25MM Cylindrical Carbide Ball Nose Burr Cut 9

Cut 9 chipbreaker carbide burrs are manufactured from a tough carbide substrate for fast stock removal, improved control and reduced chips. Ideal for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Carbide construction for increased tool toughness Cut 9 chipbreaker geometry for fast stock removal Ideal for use on hard materials up to HRC65 Typical Applications Deburring Cast iron Cast steel Carbon steel Alloy steel Stainless steel Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 0.00
1

12X20MM Cylindrical Carbide End Cut Burr Cut 9

12X20MM Cylindrical Carbide End Cut Burr Cut 9

Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 16.99
1

12X25MM Cylindrical Carbide End Cut Burr Cut 3

12X25MM Cylindrical Carbide End Cut Burr Cut 3

Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

12X25MM Round Tree Carbide Burr Cut 9

12X25MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

12X25MM Cylindrical Carbide End Cut Burr Cut 9

12X25MM Cylindrical Carbide End Cut Burr Cut 9

Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

6X18MM Cylindrical Carbide End Cut Burr Cut 3

6X18MM Cylindrical Carbide End Cut Burr Cut 3

Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

Kennedy 6X12MM Conical Shape Carbide Burr Cut 9

Kennedy 6X12MM Conical Shape Carbide Burr Cut 9

Cut 9 conical carbide burrs feature a cut-9 chipbreaker for fast stock removal, improved control and reduced chips. Ideally suited to hard materials such as steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from a tough carbide substrate for greater tool hardness Cut-9 chipbreaker increases stock removal and chip control Ideal for use on hard materials such as steel alloys and more Typical Applications Deburring Polishing Cast iron Cast steel Carbon steel Alloy steel Stainless steel Materials up to HRC65 hardness Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 4.99
1

Kennedy 3X12MM Round Tree Carbide Burr Cut 9

Kennedy 3X12MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

Kennedy 6X18MM Round Tree Carbide Burr Cut 9

Kennedy 6X18MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

Kennedy 12X25MM Round Tree Carbide Burr Cut 3

Kennedy 12X25MM Round Tree Carbide Burr Cut 3

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 19.99
1

Kennedy 8X20MM Cylindrical Carbide Plain End Burr Cut 9

Kennedy 8X20MM Cylindrical Carbide Plain End Burr Cut 9

Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 0.00
1

Kennedy 6X20MM Conical Shape Carbide Burr Cut 9

Kennedy 6X20MM Conical Shape Carbide Burr Cut 9

Cut 9 conical carbide burrs feature a cut-9 chipbreaker for fast stock removal, improved control and reduced chips. Ideally suited to hard materials such as steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from a tough carbide substrate for greater tool hardness Cut-9 chipbreaker increases stock removal and chip control Ideal for use on hard materials such as steel alloys and more Typical Applications Deburring Polishing Cast iron Cast steel Carbon steel Alloy steel Stainless steel Materials up to HRC65 hardness Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 7.99
1

5.60MM Diameter Cobalt Drill Single for Stainless Steel

5.60MM Diameter Cobalt Drill Single for Stainless Steel

The Kennedy range of HSS-Co heavy duty straight shank jobber drills provide durable and reliable cutting performance at high temperatures and speeds thanks to the addition of 5% cobalt to their alloys. Their toughness and heat resistance allows them to to drill steels with tensile strength up to 1,400 N/mm, very hard bronze, stainless steels as well as heat and acid resistant steels. Long lasting the cutting edges retain their sharpness for longer periods, maximising performance and productivity, whilst also being resistant to corrosion. Features and Benefits Made with a 5% cobalt alloy for optimal performance at high speeds and temperatures Allows for optimal cutting of metals up to a tensile strength up to 1,400 N/mm 135 point angle for precise hole making and efficient cutting For applications including steel, bronze, stainless and acid resistant steels Extended lifespan on cutting edge, required less sharpening over time Excellent corrosion resistance extends the lifespan of the tool Standards Manufacturing Standard: BS 328, DIN 338B Typical Applications Cutting and drilling Hard metals Stainless steel Bronze Notes Available in sizes 1-13mm

GBP 5.49
1

11.00MM Diameter Cobalt Drill Single for Stainless Steel

11.00MM Diameter Cobalt Drill Single for Stainless Steel

The Kennedy range of HSS-Co heavy duty straight shank jobber drills provide durable and reliable cutting performance at high temperatures and speeds thanks to the addition of 5% cobalt to their alloys. Their toughness and heat resistance allows them to to drill steels with tensile strength up to 1,400 N/mm, very hard bronze, stainless steels as well as heat and acid resistant steels. Long lasting the cutting edges retain their sharpness for longer periods, maximising performance and productivity, whilst also being resistant to corrosion. Features and Benefits Made with a 5% cobalt alloy for optimal performance at high speeds and temperatures Allows for optimal cutting of metals up to a tensile strength up to 1,400 N/mm 135 point angle for precise hole making and efficient cutting For applications including steel, bronze, stainless and acid resistant steels Extended lifespan on cutting edge, required less sharpening over time Excellent corrosion resistance extends the lifespan of the tool Standards Manufacturing Standard: BS 328, DIN 338B Typical Applications Cutting and drilling Hard metals Stainless steel Bronze Notes Available in sizes 1-13mm

GBP 0.00
1

13.00MM Diameter Cobalt Drill Single for Stainless Steel

13.00MM Diameter Cobalt Drill Single for Stainless Steel

The Kennedy range of HSS-Co heavy duty straight shank jobber drills provide durable and reliable cutting performance at high temperatures and speeds thanks to the addition of 5% cobalt to their alloys. Their toughness and heat resistance allows them to to drill steels with tensile strength up to 1,400 N/mm, very hard bronze, stainless steels as well as heat and acid resistant steels. Long lasting the cutting edges retain their sharpness for longer periods, maximising performance and productivity, whilst also being resistant to corrosion. Features and Benefits Made with a 5% cobalt alloy for optimal performance at high speeds and temperatures Allows for optimal cutting of metals up to a tensile strength up to 1,400 N/mm 135 point angle for precise hole making and efficient cutting For applications including steel, bronze, stainless and acid resistant steels Extended lifespan on cutting edge, required less sharpening over time Excellent corrosion resistance extends the lifespan of the tool Standards Manufacturing Standard: BS 328, DIN 338B Typical Applications Cutting and drilling Hard metals Stainless steel Bronze Notes Available in sizes 1-13mm

GBP 0.00
1

10.20MM Diameter Cobalt Drill Single for Stainless Steel

10.20MM Diameter Cobalt Drill Single for Stainless Steel

The Kennedy range of HSS-Co heavy duty straight shank jobber drills provide durable and reliable cutting performance at high temperatures and speeds thanks to the addition of 5% cobalt to their alloys. Their toughness and heat resistance allows them to to drill steels with tensile strength up to 1,400 N/mm, very hard bronze, stainless steels as well as heat and acid resistant steels. Long lasting the cutting edges retain their sharpness for longer periods, maximising performance and productivity, whilst also being resistant to corrosion. Features and Benefits Made with a 5% cobalt alloy for optimal performance at high speeds and temperatures Allows for optimal cutting of metals up to a tensile strength up to 1,400 N/mm 135 point angle for precise hole making and efficient cutting For applications including steel, bronze, stainless and acid resistant steels Extended lifespan on cutting edge, required less sharpening over time Excellent corrosion resistance extends the lifespan of the tool Standards Manufacturing Standard: BS 328, DIN 338B Typical Applications Cutting and drilling Hard metals Stainless steel Bronze Notes Available in sizes 1-13mm

GBP 0.00
1

Kennedy 1.80MM Diameter Cobalt Drill Single for Stainless Steel

Kennedy 1.80MM Diameter Cobalt Drill Single for Stainless Steel

The Kennedy range of HSS-Co heavy duty straight shank jobber drills provide durable and reliable cutting performance at high temperatures and speeds thanks to the addition of 5% cobalt to their alloys. Their toughness and heat resistance allows them to to drill steels with tensile strength up to 1,400 N/mm, very hard bronze, stainless steels as well as heat and acid resistant steels. Long lasting the cutting edges retain their sharpness for longer periods, maximising performance and productivity, whilst also being resistant to corrosion. Features and Benefits Made with a 5% cobalt alloy for optimal performance at high speeds and temperatures Allows for optimal cutting of metals up to a tensile strength up to 1,400 N/mm 135 point angle for precise hole making and efficient cutting For applications including steel, bronze, stainless and acid resistant steels Extended lifespan on cutting edge, required less sharpening over time Excellent corrosion resistance extends the lifespan of the tool Standards Manufacturing Standard: BS 328, DIN 338B Typical Applications Cutting and drilling Hard metals Stainless steel Bronze Notes Available in sizes 1-13mm

GBP 1.43
1