993 results (0,22960 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Kennedy 12X25MM Cylindrical Carbide Ball Nose Burr Cut 3

Kennedy 12X25MM Cylindrical Carbide Ball Nose Burr Cut 3

Cut 3 - rapid cut cylindrical carbide burrs feature a tough carbide substrate making and cut 3 geometry for use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Features and Benefits Carbide construction for increased tool toughness Cut 3 geometry for rapid cutting Ideal for use on softer non ferrous materials Typical Applications Deburring Non-ferrous materials Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 29.99
1

Kennedy 10X26MM Conical 14DEG. Carbide Burr Cut 3

Kennedy 10X26MM Conical 14DEG. Carbide Burr Cut 3

Cut 9 conical carbide burrs feature a cut 9 chipbreaker for fast stock removal, improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from hard carbide for improved rigidity Cut 9 chipbreaker for fast stock removal, improved control and reduced chips Suitable for use on materials up to HRC65 hardness Typical Applications Deburring Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 31.99
1

Kennedy 8X22MM Conical 14DEG. Carbide Burr Cut 9

Kennedy 8X22MM Conical 14DEG. Carbide Burr Cut 9

Cut 9 conical carbide burrs feature a cut 9 chipbreaker for fast stock removal, improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from hard carbide for improved rigidity Cut 9 chipbreaker for fast stock removal, improved control and reduced chips Suitable for use on materials up to HRC65 hardness Typical Applications Deburring Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 20.99
1

Kennedy 16X14MM Conical 60DEG. Carbide Burr Cut 9

Kennedy 16X14MM Conical 60DEG. Carbide Burr Cut 9

Conical 60 Inc. Angle. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 21.99
1

Kennedy 19X16MM Inverted Cone Carbide Burr Cut 9

Kennedy 19X16MM Inverted Cone Carbide Burr Cut 9

Inverted Cone. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 27.99
1

Kennedy 12X28MM Conical 14DEG. Carbide Burr Cut 3

Kennedy 12X28MM Conical 14DEG. Carbide Burr Cut 3

Cut 9 conical carbide burrs feature a cut 9 chipbreaker for fast stock removal, improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Manufactured from hard carbide for improved rigidity Cut 9 chipbreaker for fast stock removal, improved control and reduced chips Suitable for use on materials up to HRC65 hardness Typical Applications Deburring Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 39.99
1

Kennedy 4-28mm Cable Stripper with Hook

Kennedy 4-28mm Cable Stripper with Hook

The Cable Stripper No. S 4-28 is designed for precision, speed, and safety, making it an essential tool for professionals working with round cables. Suitable for cables with diameters between 4-28mm, it features an adjustable cutting depth controlled by an infinitely variable screw, ensuring the inner conductor remains undamaged during use. The self-rotating blade seamlessly shifts between circular and longitudinal cuts, providing a smooth and efficient stripping process. For enhanced safety, the retractable hook blade can be securely locked, significantly reducing the risk of injury. Fully insulated and ergonomically designed, this tool offers both comfort and reliability, ensuring long-lasting performance in demanding environments. Features and Benefits Ideal for stripping round cables with diameters ranging from 4-28mm Customisable cutting depth protects inner conductors from damage Self-rotating blade allows for smooth transitions between circular and straight cuts Safety-enhanced retractable hook blade with a secure locking feature for reduced risk of injury Insulated design offers protection during use Comfortable, ergonomic design suited for prolonged tasks Built for durability and dependable performance in tough conditions

GBP 17.99
1

Kennedy 12X25MM Cylindrical Carbide Ball Nose Burr Cut 9

Kennedy 12X25MM Cylindrical Carbide Ball Nose Burr Cut 9

Cut 9 chipbreaker carbide burrs are manufactured from a tough carbide substrate for fast stock removal, improved control and reduced chips. Ideal for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits Carbide construction for increased tool toughness Cut 9 chipbreaker geometry for fast stock removal Ideal for use on hard materials up to HRC65 Typical Applications Deburring Cast iron Cast steel Carbon steel Alloy steel Stainless steel Notes Workpiece and tools should always be steady and well supported Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED' Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used Always ensure that the tool is rated to the recommended operating speed of the burr

GBP 17.99
1

Kennedy 5 Compartment Cantilever Tool Box with Foam Inserts

Kennedy 5 Compartment Cantilever Tool Box with Foam Inserts

Heavy duty toolbox with piano hinged lids and padlock facility. The toolbox has five compartments on three levels and the cantilever system opens the toolbox to allow access to all compartments at the same time Features and Benefits Compartment bottoms lined with foam to help prevent damage to tools Integral full length double handle for carrying and opening Folding lids are stiffened for extra durability Edges are deburred for safety Can be secured with a padlock (padlock not included) Painted for rust prevention 25kg load capacity

GBP 36.99
1

12X25MM Round Tree Carbide Burr Cut 9

12X25MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

12X25MM Cylindrical Carbide End Cut Burr Cut 9

12X25MM Cylindrical Carbide End Cut Burr Cut 9

Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

Kennedy 12X25MM Round Tree Carbide Burr Cut 3

Kennedy 12X25MM Round Tree Carbide Burr Cut 3

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 19.99
1

Kennedy 10X20MM Round Tree Carbide Burr Cut 9

Kennedy 10X20MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 20.99
1

Kennedy 10X20MM Round Tree Carbide Burr Cut 3

Kennedy 10X20MM Round Tree Carbide Burr Cut 3

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 20.99
1

Kennedy 16X25MM Round Tree Carbide Burr Cut 9

Kennedy 16X25MM Round Tree Carbide Burr Cut 9

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 21.99
1

Kennedy 19X25MM Cylindrical Carbide Plain End Burr Cut 3

Kennedy 19X25MM Cylindrical Carbide Plain End Burr Cut 3

Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 33.99
1

Kennedy 16X25MM Oval Shape Carbide Burr Cut 3

Kennedy 16X25MM Oval Shape Carbide Burr Cut 3

Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 25.99
1

Kennedy 16X25MM Cylindrical Carbide Plain End Burr Cut 9

Kennedy 16X25MM Cylindrical Carbide Plain End Burr Cut 9

Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 29.99
1

Kennedy 16X25MM Oval Shape Carbide Burr Cut 9

Kennedy 16X25MM Oval Shape Carbide Burr Cut 9

Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 24.99
1

Kennedy 16X25MM Round Tree Carbide Burr Cut 3

Kennedy 16X25MM Round Tree Carbide Burr Cut 3

Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.

GBP 25.99
1