284 results (0,14682 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Kentec Sigma XT Extinguishant Coincidence Unit 1 Area to EN12094-1 Surface

Kentec Sigma XT Extinguishant Coincidence Unit 1 Area to EN12094-1 Surface

Kentec Sigma XT Extinguishant Coincidence Unit 1 Area to EN12094-1 SurfaceThe Sigma XT ECU coincidence unit has two fully monitored inputs for connection to fire detection control equipment or addressable control modules to provide an EN12094-1 EN54-2 and EN54-4compliant extinguishant control system. Its many programmable features and extensive range of inputs and outputs make the Sigma XT ECU coincidence unit suitable for all extinguishing applications where a fully featured control device is required.Among the many features of the Sigma XT ECU are serially connected status units for reduced wiring and reduced installation cost dual extinguishant outputs that may be configured for mainreserve applications and a countdown timer which displays the time until discharge of the extinguishant in seconds. All units are independently configurable via a simple code based programming interface to suit the desired application.Key FeaturesApproved to EN12094-1 EN54-2 and EN54-4Dual extinguishant outputsFirst and second stage sounder outputsFirst and second stages relay contactsMain reserve facilitySerial connection to status unitsDischarge countdown time indicator

GBP 616.56
1

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery Surface

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery Surface

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 297.34
1

Kentec K1619911 Battery Box to Match Syncro Styling Max 24 AH Battery Surface

Kentec K1619911 Battery Box to Match Syncro Styling Max 24 AH Battery Surface

Kentec K1619911 Battery Box to Match Syncro Styling Max 24 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 223.86
1

Kentec K1630313 Battery Box to Match Syncro Styling Max 38 AH Battery Surface

Kentec K1630313 Battery Box to Match Syncro Styling Max 38 AH Battery Surface

Kentec K1630313 Battery Box to Match Syncro Styling Max 38 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 252.30
1

Kentec K1620203 Battery Box to Match Syncro Styling Max 17 AH Battery Surface

Kentec K1620203 Battery Box to Match Syncro Styling Max 17 AH Battery Surface

Kentec K1620203 Battery Box to Match Syncro Styling Max 17 AH Battery Surface K16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 188.88
1

Kentec Sigma XT 3 Zone Single Area Extinguishant Control Panel to BS EN12094-1 K11031M2

Kentec Sigma XT 3 Zone Single Area Extinguishant Control Panel to BS EN12094-1 K11031M2

Kentec SigmaK11031M2XT 3 Zone Single Area Extinguishant Control Panel to BS EN12094-1Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals the Sigma XT K11031M2 extinguishant releasing panel offers outstanding value and performance for all small to medium fixed fire-fighting installations. With three detection zones as standard extinguishant release can be configured to activate from any combination of detection zone inputs to allow among other combinations any two from three type activations such as would be required for detection in ceiling void room and floor void applications.The extensive configuration options of the Sigma XT K11031M2 allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment EN12094-1 EN54-2 and EN54-4. The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety. The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status. With all of the electronics mounted on a single easily removable steel plate Sigma XT panels are both robust and easy to install. Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.Key FeaturesApproved to EN12094-1 EN54-2 and EN54-4Three detection zones as standardAny single zone or any combinations of zones can be configured to releaseConfigurable first stage sounder delaysConfigurable detection delaysZero time delay upon manual release optionCompatible with I.S. barriersNon-latching zone input option to receive signals from other systems such as aspirating equipmentConfigurable extinguishant delays up to 60 seconds in 5 second stepsConfigurable extinguishant duration up to 5 minutes in 5 second stepsCountdown timer shows time remaining until releaseSupports up to seven four wire status indicatorsBuilt in Extract Fan control

GBP 587.21
1

Kentec Conventional Sounder Control Unit K1740603

Kentec Conventional Sounder Control Unit K1740603

Kentec Conventional Sounder Control UnitK1740603Conventional Sounder controllers enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.The Sounder Controller Unit connects to conventional sounder circuits and any faults on its outputs are transmitted to the fire control panel via the incoming triggering sounder circuit thus maintaining full fault monitoring. All units contain a mains powered battery charger power supply. There is space for up to 7 Ah batteries. Indicators are provided for power healthy power fault and sounder fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four or six way units availableIntegral power supplyRobust steel enclosureSpace for 7Ah batteriesPower Healthy Power Fault and Sounder Fault indicatorsFull fault monitoring and integrity maintained

GBP 693.19
1

Kentec Conventional Sounder Control Unit K1740403

Kentec Conventional Sounder Control Unit K1740403

Kentec Conventional Sounder Control UnitK1740403Conventional Sounder controllers enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.The Sounder Controller Unit connects to conventional sounder circuits and any faults on its outputs are transmitted to the fire control panel via the incoming triggering sounder circuit thus maintaining full fault monitoring. All units contain a mains powered battery charger power supply. There is space for up to 7 Ah batteries. Indicators are provided for power healthy power fault and sounder fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four or six way units availableIntegral power supplyRobust steel enclosureSpace for 7Ah batteriesPower Healthy Power Fault and Sounder Fault indicatorsFull fault monitoring and integrity maintained

GBP 627.74
1

Kentec Sigma XT Extinguishant Control Panel to BS EN12094-1 2 - 8 Zone

Kentec Sigma XT Extinguishant Control Panel to BS EN12094-1 2 - 8 Zone

Kentec Sigma XT Extinguishant Control Panel to BS EN12094-1 2 - 8 ZoneSigma XT control panels are multi-area extinguishant control panels complying with EN12094-1 EN54-2 and EN54-4. Up to 8 zones of conventional detection with up to 4 extinguishant areas are available. Stand-alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules. Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface.All extinguishant areas may have up to 7 serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable. The versatility of the control panel can be enhanced further by the fitting of up to 7 Sigma CP Ancillary boards K580 or Sigma CP Sounder boards K461 to the RS485 serial bus. See data sheet DS39 and DS48. For compatible status units see Sigma Si data sheet DS41.Key FeaturesApproved to EN12094-1 EN54-2 and EN54-42 4 or 8 detection zones1 to 4 extinguishant areasDual extinguishant outputs for each area configurable as MainReserveFirst and second stage sounder outputs for each areaFirst and second stage volt free changeover contacts for each areaReleased volt free contact per areaFault volt free contact per areaProgrammable extinguishant delaysProgrammable output durationExtract fan controlCountdown indicator shows time until release in secondsMode select and manual release controls per areaMonitored remote manual release inputMonitored remote Hold inputMonitored remote Mode select door interlock inputMonitored remote Released pressure switch inputMonitored remote Low Pressure switch inputMonitored Abort inputSerial connection for Sigma Si status units and ancillary boards. K588Part NumberDescriptionK21021M3Sigma XT 2 Zone Extinguishant Control Panel 1 Area SurfaceK21041M3Sigma XT 4 Zone Extinguishant Control Panel 1 Area SurfaceK21042M3Sigma XT 4 Zone Extinguishant Control Panel 2 Area SurfaceK21081M3Sigma XT 8 Zone Extinguishant Control Panel 1 Area SurfaceK21082M3Sigma XT 8 Zone Extinguishant Control Panel 2 Area SurfaceK21083M4Sigma XT 8 Zone Extinguishant Control Panel 3 Area Surface larger PSU 5.25AK21084M4Sigma XT 8 Zone Extinguishant Control Panel 4 Area Surface larger PSU 5.25A

GBP 734.00
1

Kentec V1725203 2 Output Addressable Sounder Controller Unit Argus Vega Protocol

Kentec V1725203 2 Output Addressable Sounder Controller Unit Argus Vega Protocol

Kentec V1725203 2 Output Addressable Sounder Controller Unit Argus Vega ProtocolKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries. Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesIntegral power supplyRobust steel enclosure matches Kentecs range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 800.90
1

Kentec A1725203 2 Output Addressable Sounder Controller Unit - Apollo Protocol

Kentec A1725203 2 Output Addressable Sounder Controller Unit - Apollo Protocol

Kentec A1725203 2 Output Addressable Sounder Controller Unit - Apollo ProtocolKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries. Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesIntegral power supplyRobust steel enclosure matches Kentecs range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 1051.98
1

Kentec H1725203 2 Output Addressable Sounder Controller Unit - Hochiki Protocol

Kentec H1725203 2 Output Addressable Sounder Controller Unit - Hochiki Protocol

Kentec H1725203 2 Output Addressable Sounder Controller Unit - Hochiki ProtocolKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries. Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesIntegral power supplyRobust steel enclosure matches Kentecs range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 714.24
1

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To Monitor

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To Monitor

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To MonitorThe RIM100M-3-K provides a bi-directional InputOutput interface for relaying system states to RIM100E-K Ethernet modules. The RIM100M-3-K links to the RIM100E-K modules via an RS485 interface. The RIM100M-3-K supports two signal inputs and three relay outputs.The two inputs can typically be used to transfer the status of Fire and Fault states from a fire panel across a monitored link between twoRIM100E-K modules. All relay outputs are driven by signal states presented by the RIM100E-K module.The RIM100M-3-K activates an external relay contact based on the state of the monitored communication link between local and remote paired RIM100E-K modules.The module is housed in a DIN rail mountable enclosure with LED status indication visible on the front fascia of the module.Key FeaturesTwo bi-directional InputOutput signal states communicated across a link with RIM100E-K modulesSupports a simple monitored communication channel with configurable latencyAn effective solution for introducing a remote conventional Fire Alarm Control Panel to an existing network via a monitored communication channelSupport for debug via laptop with simple USB interfaceProduct is DIN rail mountableSimple LED system status indication for fire fault and monitored link

GBP 1022.52
1

Kentec H1725603 Surface Addressable Sounder Control Unit

Kentec H1725603 Surface Addressable Sounder Control Unit

Kentec H1725603 Surface Addressable Sounder Control UnitKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries. Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four or six way units availableApollo Argus Vega or Hochiki protocols availableIntegral power supplyRobust steel enclosure matches Kentec s range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 1156.42
1

Kentec A1725603 6 Output Addressable Sounder Controller Unit - Apollo Protocol

Kentec A1725603 6 Output Addressable Sounder Controller Unit - Apollo Protocol

KentecA17256036 Output Addressable Sounder Controller Unit - Apollo ProtocolKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries.Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four- or six-way units availableApollo Argus Vega or Hochiki protocols availableIntegral power supplyRobust steel enclosure matches Kentecs range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 2369.82
1

Kentec H1725403 Surface Addressable Sounder Control Unit

Kentec H1725403 Surface Addressable Sounder Control Unit

Kentec H1725403 Surface Addressable Sounder Control UnitKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries. Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four or six way units availableApollo Argus Vega or Hochiki protocols availableIntegral power supplyRobust steel enclosure matches Kentec s range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 895.34
1

Kentec V1725603 6 Output Addressable Sounder Controller Unit - Argus Vega Protocol

Kentec V1725603 6 Output Addressable Sounder Controller Unit - Argus Vega Protocol

Kentec V1725603 6 Output Addressable Sounder Controller Unit - Argus Vega ProtocolKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries.Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four- or six-way units availableApollo Argus Vega or Hochiki protocols availableIntegral power supplyRobust steel enclosure matches Kentecs range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 1658.12
1

Kentec addressable Sounder Controller Unit 5.25A PSU

Kentec addressable Sounder Controller Unit 5.25A PSU

Kentec addressable Sounder Controller Unit 5.25A PSUKentec addressable sounder controller units enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.Sounder control modules for any of the protocols supported by Kentec analogue addressable control panels are available in a steel enclosure designed to match the appearance of all Kentecs fire alarm control panel range.All units contain mains powered battery charger power supply they have space for up to 7 Ah batteries.Indicators are provided for power healthy and power fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four- or six-way units availableApollo Argus Vega or Hochiki protocols availableIntegral power supplyRobust steel enclosure matches Kentecs range of Fire control panel stylingSpace for 7Ah batteriesPower Healthy and Power Fault indicators

GBP 1704.70
1

Kentec MK67000AM1 Syncro View Marine Repeater 24v Flat Plate Fascia

Kentec MK67000AM1 Syncro View Marine Repeater 24v Flat Plate Fascia

Kentec MK67000AM1 Syncro View Marine Repeater 24v Flat Plate FasciaThe Syncro View Marine fire alarm annunciator provides a simple and convenient method of extending the controls and indications of the Syncro ASM fire alarm control panel to other locations.The large graphic liquid crystal display and high brightness LED indicators duplicate the indications on the Syncro ASM fire alarm control panel at up to 15 additional locations via a simple two-wire serial data connection.The Syncro View Marine is available in either a 24V DC powered option which can be powered via an additional 2 cores from the Syncro ASM control panel a maximum of 4 View Marine repeater panels in this combination or up to 15 View Marine repeater panels if powered local from an ancillary 24V DC supply or a 230V powered option with local battery back-up.Syncro View Marine is housed in a small enclosure which is styled similarly to the Syncro ASM control panel and is ideal for installations where a large fire control panel would be detrimental to dcor or where space is at a premium such as the Control Bridge or Helm.Up to 15 Syncro View Marine annunciators can be connected to each control panel on the Syncro ASM network making View Marine ideal where multiple points of indication andor control are required in such as places as engine rooms staff quarters living spaces or control areas.Key FeaturesUp to 15 annunciators can be connected to each Syncro ASM fire control panel.Large liquid crystal display 240 x 64 pixelsHigh brightness LED indicationsInternal sounderReplicates all Syncro ASM panel controlsSimple two-wire serial connectionSmall Syncro style enclosureRemovable electronics for easy installation24V DC or 230V AC power options

GBP 499.58
1

Kentec MK67000M1 Syncro View Marine Local LCD Repeater Panel

Kentec MK67000M1 Syncro View Marine Local LCD Repeater Panel

Kentec MK67000M1 Syncro View Marine Local LCD Repeater PanelThe Syncro View Marine fire alarm annunciator provides a simple and convenient method of extending the controls and indications of the Syncro ASM fire alarm control panel to other locations.The large graphic liquid crystal display and high brightness LED indicators duplicate the indications on the Syncro ASM fire alarm control panel at up to 15 additional locations via a simple two-wire serial data connection.The Syncro View Marine is available in either a 24V DC powered option which can be powered via an additional 2 cores from the Syncro ASM control panel a maximum of 4 View Marine repeater panels in this combination or up to 15 View Marine repeater panels if powered local from an ancillary 24V DC supply or a 230V powered option with local battery back-up.Syncro View Marine is housed in a small enclosure which is styled similarly to the Syncro ASM control panel and is ideal for installations where a large fire control panel would be detrimental to dcor or where space is at a premium such as the Control Bridge or Helm.Up to 15 Syncro View Marine annunciators can be connected to each control panel on the Syncro ASM network making View Marine ideal where multiple points of indication andor control are required in such as places as engine rooms staff quarters living spaces or control areas.Key FeaturesUp to 15 annunciators can be connected to each Syncro ASM fire control panel.Large liquid crystal display 240 x 64 pixelsHigh brightness LED indicationsInternal sounderReplicates all Syncro ASM panel controlsSimple two-wire serial connectionSmall Syncro style enclosureRemovable electronics for easy installation24V DC or 230V AC power options

GBP 474.18
1

Kentec Main Reserve Duty Extinguishant Key Switch Unit K13480M10

Kentec Main Reserve Duty Extinguishant Key Switch Unit K13480M10

Kentec K13480M10 Main Reserve Duty Extinguishant Key Switch UnitThe K13480M10 Main Reserve switch provides a convenient and secure means to operate a switch to reserve extinguishing system agent where such provision is made as a back up to the main agent. The 901 key is common to many fire detection and protection control panels and is removable in either position. The robust enclosure allows for either surface mounting or mounting to a single gang flush box.Key FeaturesCommon 901 keyswitchKey unretainedCompatible with Sigma XT and Sigma XT modelsRobust steel enclosureSurface or single gang flush mounted

GBP 99.16
1

Kentec Conventional Sounder Control Unit K1740203

Kentec Conventional Sounder Control Unit K1740203

Kentec Conventional Sounder Control UnitK1740203Conventional Sounder controllers enable additional distributed power and control for sounder circuits in situations where there are insufficient circuits at the fire alarm control panel or where additional power is required to power heavily loaded sounder circuits.The Sounder Controller Unit connects to conventional sounder circuits and any faults on its outputs are transmitted to the fire control panel via the incoming triggering sounder circuit thus maintaining full fault monitoring. All units contain a mains powered battery charger power supply. There is space for up to 7 Ah batteries. Indicators are provided for power healthy power fault and sounder fault conditions and power fault conditions are signalled to the fire alarm control panel as a sounder fault.Key FeaturesTwo four or six way units availableIntegral power supplyRobust steel enclosureSpace for 7Ah batteriesPower Healthy Power Fault and Sounder Fault indicatorsFull fault monitoring and integrity maintainedOptions AvailablePart NumberDescriptionK1740203Conventional Sounder Control Unit 2 Way cw 5.25A PSUK1740403Conventional Sounder Control Unit 4 Way cw 5.25A PSUK1740603Conventional Sounder Control Unit 6 Way cw 5.25A PSU

GBP 596.59
1

Kentec K16100D3 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 38 AH Battery Surface

Kentec K16100D3 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 38 AH Battery Surface

Kentec K16100D3 Battery Box to Match Sigma CPXT Syncro AS Styling Max 38 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment.All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.Key FeaturesFully welded all steel constructionTough epoxy powder coated finishKey lockableWide range of styles and sizesUp to 65Ah batteries can be fittedFully enclosed and robust construction

GBP 209.88
1

Kentec K16100M3 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 17 AH Battery Surface

Kentec K16100M3 Battery Box to Match Sigma CPXT amp Syncro AS Styling Max 17 AH Battery Surface

Kentec K16100M3 Battery Box to Match Sigma CPXT Syncro AS Styling Max 17 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 174.36
1