ProfitSpring | B2B PPC Agency

Carrier KP2000 Keypad FPFR12002000

Carrier KP2000 Keypad FPFR12002000A keypad for the KP 2000 series.KP 2000 series is Digital Program Controller with indicating accuracy of 0.1 control cycle of approximately 0.1 seconds and front size of 96X96mm.Universal input and storing up to 30 types of program patterns etc. are the various functionalities that are provided as standard provisions. Besides a digital indicator with large easy to view LED display various settings have an interactive system with high resolution dot matrix LCD display and handling is also easy with precise control. Besides a digital indicator with large easy to view LED display various settings have an interactive system with high resolution dot matrix LCD display and handling is also easy with precise control.

GBP 69.06

1

Kidde 1X-F4-03 Conv Fire Panel With UI and EOL Units - 4 Zone English UK

Kidde 1X-F4-03 Conv Fire Panel With UI and EOL Units - 4 Zone English UK1X fire control panels offer state of the art architecture in configurations that deliver an uncomplicated solution for small to mid-sized conventional applications. They feature an attractive contemporary design that fits with any decor.The gently curved door front offers a distinctive flair. Operator controls are inset in a striking black lexan.With support for multiple lines of conventional detectors and accessories these quick-to-configure systems offer versatility that benefits building owners and installationmaintenance companies alike.Key FeaturesModern elegant designEasy removable parts for quick and clean installationDefault regional setup modesNormal head-out zone supportSupervised alarm notification fire protection outputsEN54 compliant potential free fire fault relaysClass change daynight remote reset facilitiesAuxiliary 24VDC supply output with reset supportAuxiliary standard supervised relay output boards

GBP 187.15

1

Kidde FP2864C-99 2000 Series - Addressable Fire Panel with 2 to 8 loops 16 - 64 Zones - English UK

Kidde FP2864C-99 2000 Series - Addressable Fire Panel with 2 to 8 loops 16 - 64 Zones - English UKThe FP2864C is a versatile addressable fire panel supplied with 2class-A loops. In addition to a generous backlit LCD display itprovides LEDs for indicating both fire and fault conditions with textdescriptions for 16 fire zones on the front panel user interface. Thepanel may be upgraded with an additional 6 class-A loops as well as48 zone indicators full inter-panel networking facilities on both copperor fibre as well as with a LON network bus that supports the AritechLON700 devices and repeaters amongst others.The FP2864C provides extensive maintenance features boastspowerful IO programming and supports both Aritech 2000 and 900series protocols.The FP2864C offers multiple auto-configuration options with extensiveauto detection facilities facilitating quick initial setup even for largesystems. Multiple repeaters in various formats may be connected overa 2-wire network with both class-A and B operating modes whilst up to31 fire panels may be networked together for large applications.In addition to the comprehensive information LEDs the panels largeLCD display allows for every device in the system to be described withup to 80 characters of descriptive text as well as 40 characters forzone descriptions. Complete statistics and graphics indications forevery device are available.Several mechanisms for preventing false alarms including floatingbackground with automatic compensation double knock andcoincidence mode within and between zones as well as soak testfacilities allow the user complete piece of mind.Key FeaturesConfiguration maintenance and graphic PC software supportUp to 128 device addresses per loopFull interpanel network optionsFull range of repeaters and LON700 devices including Dutch andScandinavian fire brigade panels and Scandinavian alarm delay unitsNetworkable black box panelsPower supply for 72-hour autonomyDefault start-up and service modesProgrammable service reminders on-line diagnostics and statisticsMaintenance warnings and soak testing faciltiesOne-man maintenanceFloating background and drift compenstationProgrammable daynight functionalityCoincidence within and between zonesTimed and manual zone controlIO programming with Boolean functions maximum allocated input memory 300Scandinavian variants with Scandinavian firemans key availableEN54 and CPD certified

GBP 2294.45

1

Kidde 9-30852-18 EN 54-4 Approved 24 V 1.75 A 0.75 A Intelligent Power Supply

Kidde 9-30852-18 EN 54-4 Approved 24 V 1.75 A 0.75 A Intelligent Power SupplyThe 9-30852-18 is a fully featured 24 V EN54-4 approved power supply ideal for use in fire system applications. The output current is split between the load and charging the batteries. It features intelligent battery charging monitoring and signalling while providing deep discharge protection to prevent premature battery failure when operating from standby for extended periods.On the front of the unit diagnostic LEDs indicate the status of the power supply with various flash patterns to ensure accurate diagnostics when the unit is in fault.The range is available in different size of output currents with support for various sizes of batteries.Key FeaturesApproved to EN54-4 VdS certifiedSelf-contained box houses 18 Ah batteriesDeep battery discharge protectionDiagnostics leds on front of housing2 x relay outputsDual load connection terminalsWide input voltage range

GBP 292.87

1

Kidde AirSense Stratos ModuLaser Standard Display Module 9-30781

Kidde AirSense Stratos ModuLaser Standard Display Module 9-30781ModuLaser is a scalable aspirating smoke detection solution that makes installation easier maintenance quicker and takes applications further than traditional air sampling detectors. Two basic module types comprise the ModuLaser solution a display module and a detector module. Each detector module can accommodate up to 250 meters combined sampling pipe. Display modules and detector modules communicate by RS-485 interconnections.Display modules are available in three configurations Standard with TFT colour display status LEDs and navigation buttons Minimum with only status LEDs and Command which is similar to the Standard but with the added functionality to control various modules over SenseNET. The Minimum and Standard Display Modules can each support up to 8 detector modules while the Command Display Module can support up to 127 modules across the SenetNET network.Thanks to advanced features that make it virtually impervious to dust and dirt ModuLaser is ideal for use in hostile environments that would disable other kinds of smoke detectors. Forward scattering optical detection adds early warning capability without the risk of nuisance alarms normally associated with high sensitivity smoke detection while exclusive environmental compensation technology adds a high degree of reliability to an already solid detection solution.The Standard Display Module features a user interface which consist of a TFT colour display navigation buttons and status LEDs. Configuration of the Standard Display Module and associated detectors modules can be done via the user interface via a computer using Remote software or via SenseNET using a Command Display Module. The TFT colour display support simple operations like changing configuration options via a menu driven structure but also advanced features like viewing the chart recording in graphical format.The Standard Display Module has two USB ports one master and one slave. The master is used to connect a pen drivememory stick which in turn can be used for storing the configuration the event logs or chart recordings or for firmware upgrade purposes. While the USB slave is used to connect to a computer.Key FeaturesModular Design Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap.Zoned aspirating smoke detection Individual detector modules provide detection for individual areas or zones specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module.Simplified installation Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit.Intuitive user interface Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics.Easy pipe connection The quick fit pipe adaptor system locks down securely yet leaves plenty of room for easy pipe connection and removal.Quick location of smoke Each detector module is self-contained which means no delays in determining in which zone sampling pipe smoke is present.

GBP 1066.99

1

Kidde AirSense Stratos ModuLaser Command Display Module 9-30782

Kidde AirSense Stratos ModuLaser Command Display Module 9-30782ModuLaser is a scalable aspirating smoke detection solution that makes installation easier maintenance quicker and takes applications further than traditional air sampling detectors. Two basic module types comprise the ModuLaser solution a display module and a detector module. Each detector module can accommodate up to 250 meters combined sampling pipe. Display modules and detector modules communicate by RS-485 interconnections.Display modules are available in three configurations Standard with TFT colour display status LEDs and navigation buttons Minimum with only status LEDs and Command which is similar to the Standard but with the added functionality to control various modules over SenseNET. The Minimum and Standard Display Modules can each support up to 8 detector modules while the Command Display Module can support up to 127 modules across the SenetNET network.Thanks to advanced features that make it virtually impervious to dust and dirt ModuLaser is ideal for use in hostile environments that would disable other kinds of smoke detectors. Forward scattering optical detection adds early warning capability without the risk of nuisance alarms normally associated with high sensitivity smoke detection while exclusive environmental compensation technology adds a high degree of reliability to an already solid detection solution.The Standard Display Module features a user interface which consist of a TFT colour display navigation buttons and status LEDs. Configuration of the Standard Display Module and associated detectors modules can be done via the user interface via a computer using Remote software or via SenseNET using a Command Display Module. The TFT colour display support simple operations like changing configuration options via a menu driven structure but also advanced features like viewing the chart recording in graphical format.The Standard Display Module has two USB ports one master and one slave. The master is used to connect a pen drivememory stick which in turn can be used for storing the configuration the event logs or chart recordings or for firmware upgrade purposes. While the USB slave is used to connect to a computer.Key FeaturesModular Design Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap.Zoned aspirating smoke detection Individual detector modules provide detection for individual areas or zones specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module.Simplified installation Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit.Intuitive user interface Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics.Easy pipe connection The quick fit pipe adaptor system locks down securely yet leaves plenty of room for easy pipe connection and removal.Quick location of smoke Each detector module is self-contained which means no delays in determining in which zone sampling pipe smoke is present.

GBP 1832.20

1

Kidde AirSense Stratos ModuLaser Minimum Display Module 9-30780

Kidde AirSense Stratos ModuLaser Minimum Display Module 9-30780ModuLaser is a scalable aspirating smoke detection solution that makes installation easier maintenance quicker and takes applications further than traditional air sampling detectors. Two basic module types comprise the ModuLaser solution a display module and a detector module. Each detector module can accommodate up to 250 meters combined sampling pipe. Display modules and detector modules communicate by RS-485 interconnections.Display modules are available in three configurations Standard with TFT colour display status LEDs and navigation buttons Minimum with only status LEDs and Command which is similar to the Standard but with the added functionality to control various modules over SenseNET. The Minimum and Standard Display Modules can each support up to 8 detector modules while the Command Display Module can support up to 127 modules across the SenetNET network.Thanks to advanced features that make it virtually impervious to dust and dirt ModuLaser is ideal for use in hostile environments that would disable other kinds of smoke detectors. Forward scattering optical detection adds early warning capability without the risk of nuisance alarms normally associated with high sensitivity smoke detection while exclusive environmental compensation technology adds a high degree of reliability to an already solid detection solution.Key FeaturesModular Design Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap.Zoned aspirating smoke detection Individual detector modules provide detection for individual areas or zones specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module.Simplified installation Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit.Intuitive user interface Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics.Easy pipe connection The quick fit pipe adaptor system locks down securely yet leaves plenty of room for easy pipe connection and removal.Quick location of smoke Each detector module is self-contained which means no delays in determining in which zone sampling pipe smoke is present.

GBP 948.44

1

Kidde AirSense Stratos ModuLaser Detector Module 9-30783

Kidde AirSense Stratos ModuLaser Detector Module 9-30783ModuLaser is a scalable aspirating smoke detection solution that makes installation easier maintenance quicker and takes applications further than traditional air sampling detectors. Two basic module types comprise the ModuLaser solution a display module and a detector module. Each detector module can accommodate up to 250 meters combined sampling pipe. Display modules and detector modules communicate by RS-485 interconnections.Display modules are available in three configurations Standard with TFT colour display status LEDs and navigation buttons Minimum with only status LEDs and Command which is similar to the Standard but with the added functionality to control various modules over SenseNET. The Minimum and Standard Display Modules can each support up to 8 detector modules while the Command Display Module can support up to 127 modules across the SenetNET network.Thanks to advanced features that make it virtually impervious to dust and dirt ModuLaser is ideal for use in hostile environments that would disable other kinds of smoke detectors. Forward scattering optical detection adds early warning capability without the risk of nuisance alarms normally associated with high sensitivity smoke detection while exclusive environmental compensation technology adds a high degree of reliability to an already solid detection solution.Key FeaturesModular Design Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap.Zoned aspirating smoke detection Individual detector modules provide detection for individual areas or zones specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module.Simplified installation Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit.Intuitive user interface Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics.Easy pipe connection The quick fit pipe adaptor system locks down securely yet leaves plenty of room for easy pipe connection and removal.Quick location of smoke Each detector module is self-contained which means no delays in determining in which zone sampling pipe smoke is present.

GBP 856.82

1

Kidde 1-23911-K071 FireBeta XT Status Indicator

Kidde 1-23911-K071 FireBeta XT Status IndicatorThe Kidde 1-23911-K071 FireBeta XT Status Indicator is an accessory to the EN approved FireBeta XTXT extinguishing control panels. They provide detailed status information via 6 high bright LEDs on the status of the extinguishant release control. A LED display shows a countdown of the time remaining in seconds until the extinguishant is released. Status units are normally mounted at various access points into the risk area for notification for safety purposes.Output FunctionsThe following area statuses are signalledManual onlyAutoManualHold activatedDisabledImminentReleasedInput FunctionsTwo supervised inputs are provided on every status unit.AutoManual control An input is provided on the status unit to monitor a door interlock system. This provides additional safety for unmanned areas. Door monitoring interlocks may be fitted to all access points into the risk area which when connected to the status unit automatically changes the operating mode for the extinguishing area between automatic and manual status as the door is locked or unlocked.Extinguishing Hold control By connecting a dedicated hold button to this input activating this button allows the extinguishant release countdown to be stopped while the hold button is active.InstallationEvery status unit is provided in a rugged steel enclosure for surface mounting. Up to 7 status units may be connected to the FireBeta XTXT control panel via a fully monitored RS485 communication link of up to 1200 m.Key FeaturesFour wire connection data and powerRobust high quality surface mount enclosureUp to 7 units per panelEasy access to terminals for easy installationRemote automanual door interlock and extinguishing hold supervised inputsInternal fault diagnosis indicatorsInternal buzzer

GBP 161.27

1

Kidde 1-23911-K090 FireBeta XT 4 Zone 1 Area Control Panel

Kidde 1-23911-K090 FireBeta XT 4 Zone 1 Area Control PanelKidde 1-23911-K090 FireBeta XT extinguishing control panels are designed and manufactured to the highest standards in a quality controlled environment. With its EN12094-1 approvals it offers outstanding value and performance for small to medium sized fixed firefighting installations. The Kidde 1-23911-K090 FireBeta XT is supplied in an enclosure that matches the design and color of the status unit range.The 4 detection zone circuits allow extinguishing agent release to be configured to activate from any combination of detection zones. This allows among others any 2 zones from the combination of 3 to activate release making it ideal for applications protecting ceiling room and floor voids.The extensive configuration options of the FireBeta XT allow the functionality of the system to be extensively modified to suit the application while still complying with EN12094-1 EN54-2 and EN54-4. A large LED display on the panel fascia enables easy configuration and control. It additionally displays the time remaining until extinguishing agent release for added user safety.The control panel status can be displayed on up to 7 remote status indicators. This allows the agent release status to be displayed at for e.g. multiple entrances to a protected area adding additional user safety. The communication between the panel and its status indicators is fully monitored.The internal electronics are mounted on a single easily removable steel plate making the FireBeta XT robust and easy to install.Key FeaturesWalk test modeTwo first stage sounder outputsOne second stage sounder outputFirst stage relay contactSecond stage relay contactAuxiliary 24V DC outputMonitored manual release inputMonitored extinguishant outputMonitored Released pressure switch inputMode select keyswitch on front panel optionalManual release on front panel optional

GBP 1983.86

1

Kidde 1-23911-K069 FireBeta XT Extinguishing Control Panel 3 Zone 1 Area

Kidde 1-23911-K069 FireBeta XT Extinguishing Control Panel 3 Zone 1 AreaFireBeta XT extinguishing control panels are designed andmanufactured to the highest standards in a quality controlledenvironment. With its EN12094-1 approvals it offers outstanding valueand performance for small to medium sized fixed firefightinginstallations.The FireBeta XT is supplied in an enclosure that matchesthe design and colour of the status unit range.The 3 detection zone circuits allow extinguishing agent release to beconfigured to activate from any combination of detection zones. Thisallows among others any 2 zones from the combination of 3 toactivate release making it ideal for applications protecting ceilingroom and floor voids.The extensive configuration options of the FireBeta XT allow thefunctionality of the system to be extensively modified to suit theapplication while still complying with EN12094-1 EN54-2 and EN54-4.A large LED display on the panel fascia enables easy configurationand control. It additionally displays the time remaining untilextinguishing agent release for added user safety.The control panel status can be displayed on up to 7 remote statusindicators. This allows the agent release status to be displayed at fore.g. multiple entrances to a protected area adding additional usersafety. The communication between the panel and its status indicatorsis fully monitored.The internal electronics are mounted on a single easily removablesteel plate making the FireBeta XT robust and easy to install.Key FeaturesEN12094-1 EN54-2 and EN54-4 approvedThree detection zones as standardAny single zone or any combinations of zones can be configured to releaseConfigurable first stage sounder delaysConfigurable detection delaysZero time delay for manual release optionCompatible with I.S. barriersNon-latching zone input option to receive signals from other systems e.g. aspiration systems Configurable extinguishing agent delays up to 60 seconds in 5 second stepsCountdown timer shows time remaining until releaseSupports up to seven four wire status indicatorsBuilt in extract fan control

GBP 509.66

1

Kidde 9-30780-KID Kidde Senator Modulaser Minimum Display Module

Kidde 9-30780-KID Kidde Senator Modulaser Minimum Display ModuleModuLaser is a scalable aspirating smoke detection solution thatmakes installation easier maintenance quicker and takes applicationsfurther than traditional air sampling detectors. Two basic module typescomprise the ModuLaser solution a display module and a detectormodule. Each detector module can accommodate up to 250 meterscombined sampling pipe. Display modules and detector modulescommunicate by RS-485 interconnections.Display modules are available in three configurations Standard withTFT colour display status LEDs and navigation buttons Minimum withonly status LEDs and Command which is similar to the Standard butwith the added functionality to control various modules overSenseNET. The Minimum and Standard Display Modules can eachsupport up to 8 detector modules while the Command Display Modulecan support up to 127 modules across the SenseNET network.Key FeaturesModular Design Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap.Zoned aspirating smoke detection Individual detector modules provide detection for individual areas or zones specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module.Simplified installation Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit.Intuitive user interface Bright easy-to-see color TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics.Easy pipe connection The quick fit pipe adaptor system locks down securely yet leaves plenty of room for easy pipe connection and removal.Quick location of smoke Each detector module is self-contained which means no delays in determining in which zone sampling pipe smoke is present.

GBP 487.51

1

Kidde 1-23911-K073 FireBeta XT Status Indicator With Key Switch

Kidde 1-23911-K073 FireBeta XT Status Indicator With Key SwitchThe Kidde 1-23911-K073 FireBeta XT Status Indicator with Key Switch is an accessory to the EN approved FireBeta XTXT extinguishing control panels. They provide detailed status information via 6 high bright LEDs on the status of the extinguishant release control. A LED display shows a countdown of the time remaining in seconds until the extinguishant is released. Status units are normally mounted at various access points into the risk area for notification for safety purposes.For systems where local control of the AutomaticManual mode are required the Kidde 1-23911-K073 FireBeta XT Status Indicator with Key Switch units are supplied with this control fitted. It allows the extinguishing system operation to be locally changed from automatic to manual mode on the status unit.Output FunctionsThe following area statuses are signalledManual onlyAutoManualHold activatedDisabledImminentReleasedInput FunctionsTwo supervised inputs are provided on every status unit.AutoManual control An input is provided on the status unit to monitor a door interlock system. This provides additional safety for unmanned areas. Door monitoring interlocks may be fitted to all access points into the risk area which when connected to the status unit automatically changes the operating mode for the extinguishing area between automatic and manual status as the door is locked or unlocked.Extinguishing Hold control By connecting a dedicated hold button to this input activating this button allows the extinguishant release countdown to be stopped while the hold button is active.InstallationEvery status unit is provided in a rugged steel enclosure for surface mounting. Up to 7 status units may be connected to the FireBeta XTXT control panel via a fully monitored RS485 communication link of up to 1200 m.Key FeaturesManual only Automatic Manual mode select key switchFour wire connection data and powerRobust high quality surface mount enclosureUp to 7 units per panelRemote automanual door interlock and extinguishing hold supervised inputsEasy access to terminals for easy installationInternal fault diagnosis indicatorsInternal buzzer

GBP 180.37

1

Kidde Airsense EST-CU-11LT Control Unit 11 control slots

Kidde Airsense EST-CU-11LT Control Unit 11 control slotsESTCU-11LT Control Unit CU is a matrix mixer of input signals which routes to 4 x 100 V internal audio buses a 45-channel digital system buses or directly to audio outputs in a unit. EST-CU-11LT is designed to work for small PA VE systems or as an extension unit in more complex systems. It means that the CU can function independently as the central unit of a small system or be part of a large complex system for which it represents another level of either territorial extension operation in a remote structure or functional extension operation of further fire zones and loudspeaker lines in such a structure.The modular design of the CU and its flexibility enables optimization of equipment and cost efficiency regardless of size number of structures their location and connectivity.In the event of losing connectivity with a networked master unit ESTCU-11LT is able to perform fire alarm scenarios independently thanks to the configuration recorded locally. While attached to the main communication ring of the system EST-CU-11LT can control amplifiers and power supply managers as well as receive alarm and digital signals and send them to other system devices.EST-CU-11LT Control Unit distributes audio signals to individual zones and ensures that individual zones function properly. It also controls the condition of loudspeaker lines and amplifiers.If a fault is detected it sends the signal to the system and automatically switches to a backup amplifier. The CU is equipped with an EST-cAudIO-412 card offering 4 symmetrical line audio inputs and 12 symmetrical outputs to lead audio signals out to external devices or amplifiers of the EST ENT VES system.Key FeaturesCompliance with EN54-16Network-based system allowing configuration diagnostics andmanagement via EthernetManaging up to 254 devices on the network11 slots available for any configuration of loudspeaker control cards andcontrol input output cardsBuilt-in audio card with 4 inputs and 12 audio outputsUp to 12 messages played simultaneously in different zonesUp to 32 GB SD flash memory designated for playback and recordingmessages 48 kHz 16 bit1x POE portSupport of up to 12 secured amplifiersBuilt-in 2 control inputs and outputs2x 1 GB ports available for system extensionIntegrated DSP with implemented 3 band parametric EQ on all inputs oncontrol units 8 band parametric EQ delay lines audio limiter andfeedback eliminator on each of the audio outputsComprehensive solution based on RS485 functionality enablingseamless integration of the EST ENT VES system with 3rd partysystems thanks to implementation of standard and proprietarycommunication interfaces

GBP 1823.00

1

Kidde Airsense EST-CU-11LCD Control Unit with LCD 11 control slots

Kidde Airsense EST-CU-11LCD Control Unit with LCD 11 control slotsESTCU-11LT Control Unit CU is a matrix mixer of input signals which routes to 4 100 V internal audio buses a 45-channel digital system buses or directly to audio outputs in a unit.EST-CU-11LT is designed to work for small PA VE systems or as an extension unit in more complex systems.It means that the CU can function independently as the central unit of a small system or be part of a large complex system for which it represents another level of either territorial extension operation in a remote structure or functional extension operation of further fire zones and loudspeaker lines in such a structure.The modular design of the CU and its flexibility enables optimization of equipment and cost efficiency regardless of size number of structures their location and connectivity. In the event of losing connectivity with a networked master unit ESTCU-11LT is able to perform fire alarm scenarios independently thanks to the configuration recorded locally. While attached to the main communication ring of the system EST-CU-11LT can control amplifiers and power supply managers as well as receive alarm and digital signals and send them to other system devices.EST-CU-11LT Control Unit distributes audio signals to individual zones and ensures that individual zones function properly. It also controls the condition of loudspeaker lines and amplifiers. If a fault is detected it sends the signal to the system and automatically switches to a backup amplifier.The CU is equipped with an EST-cAudIO-412 card offering 4 symmetrical line audio inputs and 12 symmetrical outputs to lead audio signals out to external devices or amplifiers of the EST ENT VES system. Furthermore EST-CU-11LT can be equipped with an LCD touch screen with a control module which allows easy access to management functions and monitoring of the whole system such extended configuration is included in EST-CU-11LCD Control Unit.Key FeaturesCompliance with EN54-16Network-based system allowing configuration diagnostics andmanagement via EthernetManaging up to 254 devices on the network11 slots available for any configuration of loudspeaker control cards andcontrol input output cardsBuilt-in audio card with 4 inputs and 12 audio outputsUp to 12 messages played simultaneously in different zonesUp to 32 GB SD flash memory designated for playback and recordingmessages 48 kHz 16 bit1x POE portSupport of up to 12 secured amplifiersBuilt-in 2 control inputs and outputs2x 1 GB ports available for system extensionIntegrated DSP with implemented 3 band parametric EQ on all inputs oncontrol units 8 band parametric EQ delay lines audio limiter andfeedback eliminator on each of the audio outputsComprehensive solution based on RS485 functionality enablingseamless integration of the EST ENT VES system with 3rd partysystems thanks to implementation of standard and proprietarycommunication interfaces

GBP 2213.64

1

Brand

Merchant

Price (EUR)