ProfitSpring | B2B PPC Agency

Kidde Airsense Stratos to 10mm Compression Adaptor

Kidde Airsense Stratos to 10mm Compression AdaptorThe compression adaptor is used to connect 10mm capillary tube on to 34 pipework. The compression adaptor fits into all standard 34 pipework fittings.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of jointing.

GBP 9.67

1

Kidde Airsense Stratos 34 Female to 25mm Male Adaptor

Kidde Airsense Stratos 34 Female to 25mm Male AdaptorRed ABS male adaptor can be used to convert a 25mm pipe fitting for use with 34 pipework.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of jointing.

GBP 2.93

1

Kidde Airsense Stratos 27mm Socket 34 Female to 25mm Female

Kidde Airsense Stratos 27mm Socket 34 Female to 25mm FemaleRed ABS socket for connection 34 and 25mm pipework together. The socket allows sections of pipework to be easily disconnected for maintenance.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of jointing.

GBP 1.00

1

Kidde Airsense Stratos 25mm Female to 34 Male Adaptor 9-10952

Kidde Airsense Stratos 25mm Female to 34 Male Adaptor9-10952Red ABS adaptor can be used to convert a 25mm pipe for use with 34 pipe fitting.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of joining.

GBP 5.21

1

Kidde FP2864C-99 2000 Series - Addressable Fire Panel with 2 to 8 loops 16 - 64 Zones - English UK

Kidde FP2864C-99 2000 Series - Addressable Fire Panel with 2 to 8 loops 16 - 64 Zones - English UKThe FP2864C is a versatile addressable fire panel supplied with 2class-A loops. In addition to a generous backlit LCD display itprovides LEDs for indicating both fire and fault conditions with textdescriptions for 16 fire zones on the front panel user interface. Thepanel may be upgraded with an additional 6 class-A loops as well as48 zone indicators full inter-panel networking facilities on both copperor fibre as well as with a LON network bus that supports the AritechLON700 devices and repeaters amongst others.The FP2864C provides extensive maintenance features boastspowerful IO programming and supports both Aritech 2000 and 900series protocols.The FP2864C offers multiple auto-configuration options with extensiveauto detection facilities facilitating quick initial setup even for largesystems. Multiple repeaters in various formats may be connected overa 2-wire network with both class-A and B operating modes whilst up to31 fire panels may be networked together for large applications.In addition to the comprehensive information LEDs the panels largeLCD display allows for every device in the system to be described withup to 80 characters of descriptive text as well as 40 characters forzone descriptions. Complete statistics and graphics indications forevery device are available.Several mechanisms for preventing false alarms including floatingbackground with automatic compensation double knock andcoincidence mode within and between zones as well as soak testfacilities allow the user complete piece of mind.Key FeaturesConfiguration maintenance and graphic PC software supportUp to 128 device addresses per loopFull interpanel network optionsFull range of repeaters and LON700 devices including Dutch andScandinavian fire brigade panels and Scandinavian alarm delay unitsNetworkable black box panelsPower supply for 72-hour autonomyDefault start-up and service modesProgrammable service reminders on-line diagnostics and statisticsMaintenance warnings and soak testing faciltiesOne-man maintenanceFloating background and drift compenstationProgrammable daynight functionalityCoincidence within and between zonesTimed and manual zone controlIO programming with Boolean functions maximum allocated input memory 300Scandinavian variants with Scandinavian firemans key availableEN54 and CPD certified

GBP 2294.45

1

Kidde Airsense APIC Card Notifier Protocol 9-30433

Kidde Airsense APIC Card Notifier Protocol 9-30433APIC cards plug into a connector on the main PCB provided for that purpose. To use the Notifier APIC all that is required is to plug the card into this connector using the ribbon cable attached to the interface connect loop in and loop out on the terminals on the detector PCB and set the switches to the loop address. The APIC has two distinct modes of operation single address and multi address. When the interface is set to single address mode the card is set to a single address on the Notifier loop and the detector status is read from that address.Multi address mode is used when monitoring the status of multiple detectors with consecutive addresses from a single APIC card. Multi address mode is normally only used in the Command Module. Two pairs of switches Highest and Lowest on the APIC card enable the card to either respond as a single address as it does in a detector or a range of addresses which is the way it is set up in the Command Module.To set up an APIC in a detector which only requires a single address single address mode set both pairs of switches to the required address on the Notifier loop. This sets the card to single address mode. The APIC pictured is set to single address mode at address 15.

GBP 181.16

1

Kidde Airsense PSX3 Particle Separator 1-21888-K063

Kidde Airsense PSX3 Particle Separator 1-21888-K063The filter is used to limit the contamination to the detector when installed in dirty and dusty environments. The unit is supplied with union sockets to allow it to be used with 25mm and pipework. Foam elements inside the unit can easily be replaced as necessary.Key Features3-stage filterEasy replacement

GBP 196.34

1

Kidde Airsense Watertrap 9-10974

Kidde Airsense Watertrap 9-10974It is key to remove the condensation from the sampling pipe network before it enters the detector a watertrap is used for this purpose. This is a complete watertrap assembly which is supplied already assembled.

GBP 38.12

1

Kidde Airsense Stratos Pipe Cleaner 500 ml 9-10951

Kidde Airsense Stratos Pipe Cleaner 500 ml9-10951The pipe cleaner is used to clean pipework surfaces and edges prior to glueing together.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of joining.

GBP 12.71

1

Kidde Airsense Stratos 10mm Flexible Capillary Tube Red 9-10963

Kidde Airsense Stratos 10mm Flexible Capillary Tube Red9-10963The capillary tube is supplied in 100m reels and can be cut to the length to create custom length capillary sampling points.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of jointing.

GBP 172.07

1

Kidde Airsense 9-30730 Stainless Steel External Filter

Kidde Airsense 9-30730 Stainless Steel External Filter Commonly used with the Stratos Ex unit the filter controls the dust and dirt contamination in harsh environments.As the unit is external to the detector enclosure access to the filters for maintenance is easier and in hazardous areas prevents the need to declassify the area.304 Grade stainless steel enclosure requires 2 x filters 30072

GBP 414.46

1

Kidde 1-23911-K071 FireBeta XT Status Indicator

Kidde 1-23911-K071 FireBeta XT Status IndicatorThe Kidde 1-23911-K071 FireBeta XT Status Indicator is an accessory to the EN approved FireBeta XTXT extinguishing control panels. They provide detailed status information via 6 high bright LEDs on the status of the extinguishant release control. A LED display shows a countdown of the time remaining in seconds until the extinguishant is released. Status units are normally mounted at various access points into the risk area for notification for safety purposes.Output FunctionsThe following area statuses are signalledManual onlyAutoManualHold activatedDisabledImminentReleasedInput FunctionsTwo supervised inputs are provided on every status unit.AutoManual control An input is provided on the status unit to monitor a door interlock system. This provides additional safety for unmanned areas. Door monitoring interlocks may be fitted to all access points into the risk area which when connected to the status unit automatically changes the operating mode for the extinguishing area between automatic and manual status as the door is locked or unlocked.Extinguishing Hold control By connecting a dedicated hold button to this input activating this button allows the extinguishant release countdown to be stopped while the hold button is active.InstallationEvery status unit is provided in a rugged steel enclosure for surface mounting. Up to 7 status units may be connected to the FireBeta XTXT control panel via a fully monitored RS485 communication link of up to 1200 m.Key FeaturesFour wire connection data and powerRobust high quality surface mount enclosureUp to 7 units per panelEasy access to terminals for easy installationRemote automanual door interlock and extinguishing hold supervised inputsInternal fault diagnosis indicatorsInternal buzzer

GBP 161.27

1

Kidde Airsense EST-DFMS Fireman Microphone

Kidde Airsense EST-DFMS Fireman MicrophoneA EST ENT VES fireman microphone is a monitored external device working with Control Units in a redundant communication ring. It can thereby perform a superior function of a system control unit too.A fireman microphone can be used to activate alarm messages as well as general public announcements to choose individual zones and to broadcast live voice messages. It is equipped with programmable function keys which can be used to assign functions as required. Up to 5 EST-EKB-20M keyboard extensions with additional function keys can be attached to a fireman microphone.A CPU switch enables immediate and direct broadcasting of announcements to all zones without any involvement of the control system even during a failure of the central processor. The microphone is able to automatically detect a key failure and an audio path from the microphone capsule inclusive to the Control Unit. A fireman microphone is also equipped with an intercom function and is able to communicate with other microphones in the system.Key FeaturesMonitored microphone and connection of the microphone module to the systemA dedicated evacuation key 3 fully-programmable keys with a possibility of connecting up to five 20-key extensionsBuilt-in 2 contact inputs and 2 relay outputsPOE or external feeder-based power supplyBlack-box function recording all announcements played during an alarmBuilt-in SFP modules and CAT5e for simplicity of implementation of the loop topologyRS485 for communication with external systemsIntercom function between all fireman and zone microphones

GBP 1256.28

1

Kidde Airsense Stratos-Micra 25 Relay Input Card

Stratos-Micra 25 Relay Input CardStratos-Micra 25 is intended to provide LOCALISED incipient fire detection only. This means that it is suitable for the substantial range of applications typified by small non-compartmentalised rooms warehouse racking or pieces of electronic or electromechanical equipment where it is desirable to achieve individual incipient fire reporting. In compartmentalised rooms each compartment would normally use individual Stratos-Micra 25 detectors.This product employs a very low-power aspirator and the aspirating capability of the Stratos-Micra 25 detector is limited accordingly. Stratos-Micra 25 is NOT intended to protect large areas or to sample from areas where there may be any difference in airflow rates or pressure differentials. Application of Stratos-Micra 25 in these circumstances is not recommended. If detection in environments conforming to these descriptions is required alternative versions of Stratos products should be used.We recommend a maximum sampling pipe length of 25 metres to be used on the Stratos-Micra 25. Maximum single length of sampling pipe to be used on the Stratos-Micra 100 detector is 100 metres or 2 x 50 meter lengths in still air with 25 sampling holes or Capillary Remote Sampling Points. This will provide a transport time from the end of the sampling pipe within 120 seconds. If the protected area has airflow present the maximum permitted sampling pipe length will be reduced.Key FeaturesUltra small low cost aspirating smoke detector for easy and discreet installationHigh sensitivity provide by laser based forward light scatter for reliable early warningSignal sampling pipe up to 50m in lengthUnique ClassiFire perceptive artificial intelligent system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protect environment and dust separation system contaminationUnwanted alarm from dust are avoided using patented Dual TechnologyLDD 3D Laser Dust Discrimination and elimination system

GBP 1285.96

1

Kidde Airsense Stratos-Micra 25 Basic Detector 9-30671

Stratos-Micra 25 Basic Detector9-30671Stratos-Micra 25 is intended to provide LOCALISED incipient fire detection only. This means that it is suitable for the substantial range of applications typified by small non-compartmentalised rooms warehouse racking or pieces of electronic or electromechanical equipment where it is desirable to achieve individual incipient fire reporting. In compartmentalised rooms each compartment would normally use individual Stratos-Micra 25 detectors.This product employs a very low-power aspirator and the aspirating capability of the Stratos-Micra 25 detector is limited accordingly. Stratos-Micra 25 is NOT intended to protect large areas or to sample from areas where there may be any difference in airflow rates or pressure differentials. Application of Stratos-Micra 25 in these circumstances is not recommended. If detection in environments conforming to these descriptions is required alternative versions of Stratos products should be used.We recommend a maximum sampling pipe length of 25 metres to be used on the Stratos-Micra 25. Maximum single length of sampling pipe to be used on the Stratos-Micra 100 detector is 100 metres or 2 x 50 meter lengths in still air with 25 sampling holes or Capillary Remote Sampling Points. This will provide a transport time from the end of the sampling pipe within 120 seconds. If the protected area has airflow present the maximum permitted sampling pipe length will be reduced.Key FeaturesUltra small low cost aspirating smoke detector for easy and discreet installationHigh sensitivity provide by laser based forward light scatter for reliable early warningSignal sampling pipe up to 50m in lengthUnique ClassiFire perceptive artificial intelligent system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protect environment and dust separation system contaminationUnwanted alarm from dust are avoided using patented Dual TechnologyLDD 3D Laser Dust Discrimination and elimination system

GBP 1163.99

1

Kidde Airsense Stratos Capillary Tubing 10mm 9-10964

Kidde Airsense Stratos Capillary Tubing 10mm9-10964The capillary tubing natural colour is provided in a 100m reel and can be used as an alternative to the red flexible tube to provide a discrete sampling point.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of joining.

GBP 172.07

1

Kidde AirSense ModuLaser Pipe Adaptor Bend Replacement Fitting 9-30795

Kidde AirSense ModuLaser Pipe Adaptor Bend Replacement Fitting 9-30795The patented quick fit pipe adaptor is designed to easily facilitate the connection and removal of pipework from the detector module. Designed to seal around the pipework by means of a threaded collar the adaptor can easily accommodate 34 or 25mm pipework. The adaptor is flexible in its two part construction allowing the installer the ability to twist the connector to compensate for any minor pipework misalignment.

GBP 34.74

1

Kidde AirSense ModuLaser Pipe Adaptor Straight Replacement Fitting 9-30796

Kidde AirSense ModuLaser Pipe Adaptor Straight Replacement Fitting 9-30796The patented quick fit pipe adaptor is designed to easily facilitate the connection and removal of pipework from the detector module. Designed to seal around the pipework by means of a threaded collar the adaptor can easily accommodate 34 or 25mm pipework. The adaptor is flexible in its two part construction allowing the installer the ability to twist the connector to compensate for any minor pipework misalignment.

GBP 35.68

1

Kidde Airsense EST-DMS Zone Microphone

Kidde Airsense EST-DMS Zone MicrophoneThis zone microphone is used to activate general public announcements to choose individual zones and to broadcast live voice messages. It can be connected directly to a selected Control Unit or via an additional Ethernet switch. A zone microphone can be powered locally 48 V or from a Control Unit via POE.It is equipped with programmable function keys which can be used to assign functions as required. All operational parameters can be programmed e.g. assignment of zones to various keys naming of zones and zone groups determining priorities setting up access rights to announcements volume controls push to talk key music onoff and music routing. Furthermore LEDs on the EST-DMS provide information about existing fault on the system any faults in a specific speaker zone evacuation mode on and type of announcement in the zone BGM PA EVAC Warning fireman microphone.Up to 5 EST-EKB-20M keyboard extensions with additional function keys can be attached to a zone microphone. Similarly to a fireman microphone it is also equipped with an intercom function and is able to communicate with other microphones in the system.Key FeaturesMonitored connection of the unit to the system9 fully-programmable keys with a possibility of connecting up to five20-key extensions4 non-symmetrical audio inputs 18 stereo jack connectorBuilt-in speakerStereo jack sockets for a headsetImplemented intercom functionPower supply via POE

GBP 866.45

1

Kidde SD2000 Sounder Board For FP2000

Kidde SD2000 Sounder Board For FP2000The Kidde SD2000 is a sounder board for the FP2000 series fire panels. This Sounder Board is a sounder interface board to connect into the 12002000 series fire panels. It provides the panel with 4 supervised outputs dedicated to Sounder Fire Brigade Fault Routing and Fire protection control as well as 4 potential free change over relays that is freely programmable from the fire panel logic.One SD2000 is normally pre-fitted in every fire panel except for the FB2800 black box. Any fire panel can only control one SD2000.

GBP 205.27

1

Kidde Airsense Air Heat Box 9-30422

Kidde Airsense Air Heat Box 9-30422The Stratos range of High Sensitivity Aspirating Smoke Detectors are suitable for installation within an area only if the ambient temperature is expected to be above 0C the minimum operating temperature of a Stratos detector is typically -10C check the specification of the particular detector in question. Where the air temperature in the protected area is consistently below this temperature it is imperative that the detector is mounted outside the protected area in an environment where the temperature meets that specified for the detector.However the sampled air from the protected area must be conditioned before it is passed into the detector. The Air Heater Box is designed to raise the temperature of the air drawn from a very cold environment by passing it across a heating element before it passes into the detector. In this manner the problem of condensation on sampling pipework external to the protected area is minimised. Warming the air sample will also ensure the components of the detector operate within the specified temperature tolerances and it reduces the possibility of surface condensation.

GBP 1192.28

1

Kidde Airsense Stratos Remote Display Unit 9-30802

Kidde Airsense Stratos Remote Display Unit 9-30802The Remote Display Unit RDU is a LED bar-graph repeater and status display which is used to remotely mimic the status of a Stratos ASD. It comes in 19 rack format that allow for multiple units to be mounted next to each other in a 19 rack or individually with the support of the 9-30817 housing.The RDU is connected onto the SenseNET bus which provide the data flow between the unit and the ASD. A bank of switches selects the detector whose display is to be repeated. The unit is powered from a 24V DC nominal power supply.The RDU provide by way of LEDs basic ok and faults indication 4 alarm levels and a bar-graph display which show the level of obscuration. The RDU can also be expanded with a relay card 9-30803 which provide relay output for the 4 alarms flags and fault indication.Key FeaturesLED status indication bar-graph display19 rack mount supportOptional relay expansion

GBP 290.11

1

Kidde Airsense Stratos Flexible Connector

Kidde Airsense Stratos Flexible ConnectorFlexible connector is provided in 1m length for use with 34 pipework and provides an easy solution to negotiating around obstacles.Aspirating smoke detection system is the network of sampling pipes that actively transport air from a protected area to the detector. ABS Acrylonitrile Butadiene Styrene is a homogenous material with good chemical resistance and high impact strength. Other beneficial features are its suitability for use at low temperatures -40C and its ease of jointing.

GBP 36.67

1

Kidde Airsense Discrete Clear Sampling Point Assembly 9-10921

Kidde Airsense Discrete Clear Sampling Point Assembly 9-10921The 9-10921 is a discrete capillary sampling point. It is supplied complete with a 27mm diameter t-union to which the flexible sample pipe connects. The flexible sampling pipe has a diameter of 10mm and is 1m long. At the end of the flexible sampling pipe the sampling point is connected.

GBP 25.99

1

Kidde Airsense AAE-0100 Alarmline II Analogue Linear Heat Detection Cable PVC Coated 100m Roll

Kidde Airsense AAE-0100 Alarmline II Analogue Linear Heat Detection Cable PVC Coated 100m RollThe Kidde Alarmline II analogue sensor cable is designed for use with the AAECU EN54 control unit only.It is PVC coated and suitable for indoor use.Operating Temperature Limits -40 to 125 Degrees CelsiusContinuous Operating temperature -40 to 90 Degrees CelsiusCable Diameter mm 300 Diameter x 100dWeight 2.37kg

GBP 777.67

1

Brand

Merchant

Price (EUR)