32 results (0,19542 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Megger MTB7671/2 Instrument Test Box

Megger MTB7671/2 Instrument Test Box

The Megger MTB7671/2 Instrument Test Box is a multifunctional calibration device designed to verify the performance of electrical installation testers between formal calibrations. Housed in a robust carry case, it enables on-site checks of insulation resistance, continuity, loop impedance, RCD operation, and voltage measurement functions. This portable checkbox supports compliance with standards such as BS7671, BS EN 61557, and IET On-Site Guide recommendations. Colour-coded test points and clear pass/fail indicators simplify use, while included result cards and test labels help maintain a documented record of performance checks. Features and Benefits Verifies key tester functions: insulation resistance, continuity, loop impedance, RCD operation, and voltage measurement Provides insulation resistance test voltages at 250V, 500V, and 1000V, with resistance values at 9M and 90M to verify measurement accuracy Offers continuity testing with resistance values at 0.5 and 5, ensuring correct voltage (4-24V) and current (>200mA) levels Simulates RCD tests at 10mA, 30mA, and 100mA, allowing five standard tests for each current value Facilitates loop impedance testing for both trip and no-trip methods without tripping RCD-protected circuits Supports traceability and best practices in line with IET guidelines Notes Supplied in a hard protective transport case Includes record cards and adhesive test labels for equipment logging

GBP 699.99
1

5x Megger MFT1741 Multi-function Tester with Loop Test & Confidence Meter

5x Megger MFT1741 Multi-function Tester with Loop Test & Confidence Meter

The MFT1741 multifunction tester is an instrument designed for testing low voltage electrical installations and especially in locations that suffer from high electrical noise. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. Enhanced non-trip loop impedance measurement technology. "Confidence meter" measurement analysis (patent pending). Full single and 3 phase compliant installation testing. 10 mA to 1 A single and 3 phase RCD testing. Earth testing and stake-less testing for electrode resistance measurement. Simple colour-coded test selection. Automatic start - no need to press TEST so leaving both hands free to hold probes. Internal memory and Bluetooth communications. EN61010 CAT IV safety rating and tough IP54 case.

GBP 9499.95
1

Megger PAT420 Pass/Fail Portable Appliance Tester PAT, Class I, Class II Test Type

Megger PAT420 Pass/Fail Portable Appliance Tester PAT, Class I, Class II Test Type

PAT420 is part of a new generation of downloading portable appliance tester. It fully PAT tests portable electrical equipment to the latest edition of the Code of Practice for the In-Service Inspection and Testing of Electrical Equipment. Provides an extensive memory and downloading capability with the added features of 110V operation. 250/500V insulation tests. 200mA, 10A & 25A continuity test with high duty cycle for repetitive testing. Portable RCD and extension lead testing. Alternative leakage tests. 10,000 memory storage with USB download. Improved operating system architecture. Continuous operation. Instant re-start as you move from room to room testing. Large 5.7in 1/42in VGA backlit full colour screen for clear results. Selectable PASS/FAIL limits provide instant indication of a faulty asset. 230 & 110V operation for industrial, commercial and residential applications

GBP 2399.99
1

Megger PAT320 Portable Appliance Testing Business in a Box

Megger PAT320 Portable Appliance Testing Business in a Box

The PAT320 Portable Appliance Testing Machine is a Business in a box by providing comprehensive tools for portable appliance testing, ideal for electrical contractors or businesses looking to diversify and expand their services. With an easy-to-use tester, guides, and marketing resources, it ensures compliance and adds value to customer service. Features and Benefits All-in-one starter kit for PAT testing, ideal for new ventures Includes PAT320 tester, test leads, pass labels, and report book Guides for appliance testing and business marketing Durable protective case with storage options Enhances service portfolio for electrical contractors

GBP 1799.99
1

Megger PAT150 Handheld Portable Appliance Tester

Megger PAT150 Handheld Portable Appliance Tester

This hand held portable appliance tester enable simple, fast safety testing in all environments including offices, shops and business units. It is ideally suited to training organisations with a very short learning curve and has tough, reliable functionality, With a rubber armoured cases and hardened, scratch proof glass. Battery powered operation is perfect for those locations where an electrical supply is not available, inconvenient or unsafe, especially building sites and warehouses. Conforms to all UK and European requirements for electrical safety testing. Can be used for testing fixed appliances. Simple tick or cross, pass or fail indication plus measurement. Battery powered with rechargeable options. Safe 250 V insulation and leakage test for surge-protected and IT equipment. Testing portable and fixed electrical equipment. Substitute leakage testing. 10 mA and 30 mA portable RCD lead testing. Adjustable PASS test limits and mains powered leakage testing. Separate tests for continuity, insulation, mains powered leakage testing and SELV measurements can be made using the Quick Test (QT) button. Test group pass limits and test duration can be configured by the user. Bond lead resistance can be nulled to reduce measurement errors. Live circuit measurement is available for testing the mains supply and socket polarity or electrical circuit voltage to 300 V ac. PAT150R - Rechargeable version of the PAT150

GBP 999.99
1

Megger PAT320 Mains Operated Portable Appliance Tester

Megger PAT320 Mains Operated Portable Appliance Tester

This mid-range PAT tester is best suited to those with a larger amount of appliances to test and is an ideal tester for bed and breakfasts, hotels, professional PAT organisations, electrical contractors and maintenance/facilities companies. With the PAT320, users can take full control over their testing with built-in manual testing modes. For those wanting to speed up testing, the PAT320 also includes a set of automatic procedures which will automatically cycle through appropriate tests depending on what type of appliance is connected. The PAT320 is suitable for testing 230V and 110V appliances (both class I and II) and can also test IEC power leads, extension leads and can also test portable RCDs. It can perform earth bond testing, continuity testing, insulation testing, substitute leakage testing and can also perform touch current, operational, extension lead, portable RCD and fuse testing procedures. This PAT tester even has a full colour graphical display! Automatic or manual modes - take complete control over your PAT testing. 230V and 110V operation - suitable for use on both types of appliance. Earth bond test at 25A, 10A and 200mA (IT equipment safe). Can test portable RCDs. Extension lead and IEC lead testing. Differential, touch and substitute leakage testing

GBP 1639.99
1

Megger PAT150R Handheld Portable Appliance Tester - Rechargeable

Megger PAT150R Handheld Portable Appliance Tester - Rechargeable

This hand held portable appliance tester enable simple, fast safety testing in all environments including offices, shops and business units. It is ideally suited to training organisations with a very short learning curve and has tough, reliable functionality, With a rubber armoured cases and hardened, scratch proof glass. Battery powered operation is perfect for those locations where an electrical supply is not available, inconvenient or unsafe, especially building sites and warehouses. Conforms to all UK and European requirements for electrical safety testing. Can be used for testing fixed appliances. Simple tick or cross, pass or fail indication plus measurement. Battery powered with rechargeable options. Safe 250 V insulation and leakage test for surge-protected and IT equipment. Testing portable and fixed electrical equipment. Substitute leakage testing. 10 mA and 30 mA portable RCD lead testing. Adjustable PASS test limits and mains powered leakage testing. Separate tests for continuity, insulation, mains powered leakage testing and SELV measurements can be made using the Quick Test (QT) button. Test group pass limits and test duration can be configured by the user. Bond lead resistance can be nulled to reduce measurement errors. Live circuit measurement is available for testing the mains supply and socket polarity or electrical circuit voltage to 300 V ac. PAT150R - Rechargeable version of the PAT150

GBP 1099.99
1

Megger MFT1711 Single Phase Multi-function Tester

Megger MFT1711 Single Phase Multi-function Tester

Expressly for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.MFT1711 17th Edition Multifunction Tester. This entry level 17th Edition tester offering CAT IV, 3 and 2-wire non trip loop testing with resistance and fault current display,frequency measurement and the largest, brightest and clearest display on the market. This now adds a 1 kV insulation test range, Auto RCD tests, 10 mA RCD, programmable (VAR) RCD, ZMAX and true RMS voltage measurement. Two and three wire non trip loop testing for fast repeatable results. Large bright LCD display showing dual parameters - loop resistance and fault current, insulation resistance and test voltage. Phase rotation indication for verification of rotating machinery. 3-phase RCD testing for industrial applications with no earth. Suite of earths test for electrode resistance measurement. On-board data storage and Bluetooth download.

GBP 1129.99
1

Megger RDCT320 Residual Current Tester (Rcd) 10, 30, 100, 300, 500, 1000 MA - 50-280V

Megger RDCT320 Residual Current Tester (Rcd) 10, 30, 100, 300, 500, 1000 MA - 50-280V

Two RCD testers that comply with EN61557 for testing, measuring or monitoring of protective measures. The RCDT300 series can perform 1/2I, 1xI and 5xI tests on RCDs. rated at 10 -1000mA on general and selective (time delayed) RCDs. Tests standard, DC, selective, and programmable RCDs. Ramp testing. Auto (Remote) testing. 3 Phase safe. Enables testing on 110 V centre tapped supplies. Tough rubber armoured case with built-in cover. Weatherproof to IP54. USB interface for downloading test result. Tough: Designed to take the bashing that testers receive on site, the Megger RCDT testers are rubber armoured. The rigid display cover folds right out of the way during testing and locks down to protect the display when it is finished. Simple to use: No buried functions mean it is obvious how to use the Megger RCDT. Colour coded ranges help test range selection, reducing test times and fault location. A user guide in the lid provides all the basic information. Hangs comfortably around the neck for hands-free use because the instrument is carefully balanced.

GBP 939.99
1

Megger RCDT310 Residual Current Tester (Rcd) 30, 100, 300, 500 MA - 100-280V

Megger RCDT310 Residual Current Tester (Rcd) 30, 100, 300, 500 MA - 100-280V

Two RCD testers that comply with EN61557 for testing, measuring or monitoring of protective measures. The RCDT300 series can perform 1/2I, 1xI and 5xI tests on RCDs. rated at 10 -1000mA on general and selective (time delayed) RCDs. Tests standard, DC, selective, and programmable RCDs. Ramp testing. Auto (Remote) testing. 3 Phase safe. Enables testing on 110 V centre tapped supplies. Tough rubber armoured case with built-in cover. Weatherproof to IP54. USB interface for downloading test result. Tough: Designed to take the bashing that testers receive on site, the Megger RCDT testers are rubber armoured. The rigid display cover folds right out of the way during testing and locks down to protect the display when it is finished. Simple to use: No buried functions mean it is obvious how to use the Megger RCDT. Colour coded ranges help test range selection, reducing test times and fault location. A user guide in the lid provides all the basic information. Hangs comfortably around the neck for hands-free use because the instrument is carefully balanced.

GBP 719.99
1

Megger PSI410 Phase Rotation Sequence Tester

Megger PSI410 Phase Rotation Sequence Tester

The PSI410 Phase Rotation Sequence Tester ensures reliable performance with its LED phase rotation indicators and audible direction signals. Designed for industrial environments, it provides safety with fused test leads and insulated probes. Its triple bi-coloured LED display and rugged casing make it an essential tool for electricians when checking phase sequences in motors, pumps and air conditioning supplies. Self-powered and easy to use, it is a durable and efficient choice for professionals. Features and Benefits LED clockwise and anti-clockwise phase rotation indication Audible indication of direction Phase condition LEDs for quick checks Fused test leads for enhanced safety Crocodile clips and prods for versatility Dual phase colour identification for clear results

GBP 219.99
1

Megger LTW325 Earth Loop Tester

Megger LTW325 Earth Loop Tester

The mid-range model in Megger's LTW300 range of earth loop testers, the LTW325 builds upon the functionality of the LTW315 and adds such functionality as the ability to display Max Zs and R1 + R2. Capable of full 2 wire loop testing designed not to trip 30ma RCDs and suitable for use with a wide range of voltages, the Megger LTW325 can be used to quickly and easily verify the loop impedance of electrical circuits without directly disconnecting the electrical supply. Loop testing is performed using only 2 leads and can be connected as phase to earth, phase to neutral or phase to phase. An integrated no-trip loop test ensures that the Megger LTW325 will not trip any RCD 30mA while a separate high current loop test can be used should there not be an RCD fitted to the system. To ensure accuracy when testing this earth loop tester also includes an integrated electrical noise detection filter that will detect and filter out the effects of heavy electrical noise which can have a negative effect on training results. - 2-wire non trip loop testing - 2 wire fast testing (high current) - Suitable for use on 110V to 280V applications - Also suitable for use on 50V to 440V applications - Phase to phase testing - 20 KA PFC range - 0.01 resolution - Automatic noise detection and correction - Auto loop test initiation - Voltage and frequency measurements - Max Zs display - R1 + R2 display

GBP 849.99
1

Megger MPU690 2 Pole Proving Unit

Megger MPU690 2 Pole Proving Unit

Used in combination with two-pole voltage testers to verify that they are safe for use both before and after testing periods. A Portable lightweight unit with two integrated ports designed to house the probe tips of a voltage tester. Once the probes are inserted into these holes and the MPU690 is activated it will test voltage levels in five steps - 50, 100, 230, 400 and 690V. When each voltage passes the proving unit's tests an LED light will switch on on the front of the tester. Designed to work automatically whenever its needed, the MPU690 will power on once testing probes are inserted into the unit and it will then simulate a 50Hz output voltage designed to represent AC mains supply. The MPU690 is perfectly acceptable for use with other makes and models of two-pole voltage testers. 5 stepped nominal output voltages. High output power suitable for test lamps. Extended battery life, although the unit has a high output the unit has exceptionally good battery life. The rugged case of the MPU690 features a magnetic base for convenient use. N.B. The MPU690 is not recommended for use with multi- meters.

GBP 149.99
1