ProfitSpring | B2B PPC Agency

Morley RS485 to RS232 Converter

Morley RS485 to RS232 ConverterMorley RS485 to RS232 converter for the Morley ZXSe range of intelligent addressable fire alarm control panels.

GBP 635.48

1

Morley PL-1000 Morley-IAS Plus Single Loop Control Panel Expandable To Two Loops

Morley PL-1000 Morley-IAS Plus Single Loop Control Panel Expandable To Two LoopsThe PL-1000 control panel includes Honeywells Advanced AP protocol which maximises the speed and efficiency of alarm detection as well as providing maximum information to the installer. The 4.3 480x272 pixel touchscreen provides an intuitive user interface via its menus with quick and easy system operation. The PL-1000 control panel allows full system configuration from the screen itself.The PL-1000 is a single loop addressable panel expandable to two loops with an optional loop card PL-LIB01S. Each loop supports 159 detectors and 159 input output modules.The analogue addressable PL-1000 is designed for small to medium sized installations. The PL-1000 is very easy to install and configure. The system is designed to manage both traditional wired field devices and Agile wireless equipment. Installation and commissioning time is reduced to a minimum since the user interface allows in few steps to commission and test field devices.Due to its size and power it is the ideal analogue addressable control panel for small to medium sites where maximum information is required from the installed devices. The control panel allows the identification of each of the intelligent sensors in order to verify the state of the system before carrying out any evacuation or transmission to the alarm receiving station or to the building management system.Key Features4.3 109.2 cm touchscreen graphical colour display 480 x 272 pixel resolution with back illumination and back-lit membrane buttonsMultiple language selectionsIntuitive colour event indication tab for an overview of system status at a glanceSimple DOT Matrix Cause Effect rule builderQuick configuration of the unit from the same displayOn-screen 16 Virtual Zonal LED indicators with event colour coding to increase situational awarenessSingle loop expandable to 2 loops. 318 addresses per loop 159 detector 159 ModulesCertified to EN54-2 EN54-4 EN54-13 LVD 62.368-12014A11Morley-IAS Advanced Protocol and enhanced Agile wireless features including on-screen device battery and signal strengthsIncludes serial communication ports for TPP including Connected Life Safety Services CLSS and repeaters

GBP 516.37

1

Morley EVCS-DAXC Digital To Conventional Conversion Exchange Unit

Morley EVCS-DAXC Digital To Conventional Conversion Exchange UnitThe EVCS-DAXC is a digital to conventional conversion exchange unit which allows network 8 outstations to be retained and infrastructure converted to Network 16.

GBP 850.50

1

Morley DST10 Sampling Tube 2.4m to 3.7m Duct Width

Morley DST10 Sampling Tube 2.4m to 3.7m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 57.84

1

Morley DST5 Sampling Tube 1.2m to 2.4m Duct Width

Morley DST5 Sampling Tube 1.2m to 2.4m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 39.24

1

Morley DST1.5 Sampling Tube for 0.3m to 0.6m Duct Width

Morley DST1.5 Sampling Tube for 0.3m to 0.6m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 20.04

1

Morley DST3 Sampling Tube for 0.6m to 1.2m Duct Width

Morley DST3 Sampling Tube for 0.6m to 1.2m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 31.61

1

Morley W1A-R470SG-K013-81 Intrinsically Safe Outdoor Call Point - 470 Ohm

Morley W1A-R470SG-K013-81 Intrinsically Safe Outdoor Call Point - 470 OhmThis Intrinsically Safe version W1A outdoor call point is available for installation in hazardous areas. These call points are manufactured to protect against other hazards as defined in paragraph 1.2.7 of annex II of the ATEX Directive 949EC. They are intended for outdoor use within Intrinsically Safe I.S. systems using suitable I.S. barriers.Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new WCP outdoor Call Point range. The outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product.Installation time and ultimately cost are of paramount importance to any fire or security installer. The WCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new WCP products utilise a special terminal block where all initial installation cabling is terminated.Key Features470 Ohm

GBP 91.57

1

Morley RMK400AP Recessed Mounting Kit

Morley RMK400AP Recessed Mounting KitThe RMK400AP recessed mounting kit provides a simple installation solution where the application demands a lower profile sensor. The RMK400AP is for white sensors the RMK400AP is for Ivory coloured sensors.Key FeaturesAppropriate for drywall or suspended acoustical panel ceilingsMay be used with standard junction boxes connected to flexible conduitIncorporates special mounting bracket that secures the kit and base assembly to the junction box and ceiling panelkit suitable for flush mounting bases into a false ceiling

GBP 19.82

1

Morley MAXSC64 Max Smart Cube Module Kit Supports A Network Of Up To 64 Panels - Includes PSU and Enclosure

Morley MAXSC64 Max Smart Cube Module Kit Supports A Network Of Up To 64 Panels - Includes PSU and EnclosureA Morley Max Smart Cube Model Kit which can support a network of up to 64 panels.Key FeaturesIncludes PSUComes with enclosure

GBP 6124.90

1

Morley MA-8000-01 Morley-IAS Max four Loop expandable to eight networkable For System Sensor amp Apollo protocol

Morley MA-8000-01Morley-IAS Max fourloop expandable to eight networkable For System Sensor Apollo protocolMorley MAx panels are multiprocessor fire detection systems that are suitable for configuration of a wide range of installations.The system offers fire detection solutions integrated for many applications like hotels offices hospitals industrial environments and production facilities.Morley MAx panels are not a simple FACP but an advanced very powerful fire detection system that uses the CAN bus technology. This protocol originally designed for operation in industrial environments makes the system highly resistant to external factors as electrical disturbances and other sources of false alarms.The system is certified in compliance with the standards EN54-2 EN 54-4 and EN54-13.FEATURES AND BENEFITS USER INTERFACEThe ergonomic user interface is designed so that every operation is easy and intuitive. The panel has a 7 TFT touch display 800 x 480 with backlight with 256 colours for entering the control panel programming data and interacting with the operators.NETWORK BETWEEN PANELSEach control panel can be networked thanks to its two high-speed opto-isolated CAN bus lines for connecting a fail-safe closed loop network. With components distributed throughout the building up to 64 panels or 128 loops can be networked together to build a unified system that shares events and logic. All networked panels include built-in CAN bus network diagnostics with visual topology for fast and simple fault finding.MULTIPLE INSTALLATION OPTIONSMorley MAx panels offer multiple installation options in addition to standard wall mounting special frames are available for flush mounting options to deliver high-quality design in commercial or luxury environments. Furthermore MA-2000 and MA-8000 can be installed in a standard 19 rack without additional kits.Key Features4 access levels in accordance with EN 54 standards.Programmable text 32 characters for points and zones.Up to 2000 soft zones 400 logical groups in stand-alone systems and 1600 groups in network configuration with 64 panels or 128 total loops.Control-by-event CBE equations for activations with logical operators AND OR DEL etc.Historical log stores 10000 events plus 4000 active events in non-volatile memory standalone or network configuration.Clock in real time.Auto-programming lines with automatic recognition of the model of the devices.Decision algorithms for the alarm pre-alarm and faults.Automatic day night sensitivity change.Indication of the need to clean the smoke sensors.Programmable alarm threshold for all sensors.Walk-Test function by zone.

GBP 1772.89

1

Morley W1A-R470SG-STCK-01 Surface Outdoor Call Point with 470 Ohm Resistor and N.O. Contact

Morley W1A-R470SG-STCK-01 Surface Outdoor Call Point with 470 Ohm Resistor and N.O. ContactThe W1A-R470SG-STCK-01 is a Surface Outdoor Call Point with 470 Ohm Resistor and N.O Contact. It comes complete with a glass element.The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product.Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard.Key FeaturesIP Rating IP67Comes with resettable glass element

GBP 110.16

1

Morley W5A-RP05SG-K013-01 Addressable Glass Weatherproof Call Point

Morley W5A-RP05SG-K013-01 Addressable Glass Weatherproof Call PointThis addressable call point for the Morley IAS protocol features Installation efficiency flexibility and full compliance with the latest standards are at the heart of the new WCP Outdoor Call Point range.The outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product. Installation time and ultimately cost are of paramount importance to any fire or security installer.Key FeaturesIP rating IP67Glass element

GBP 206.56

1

Morley 6500-MMK Beam Detector Multi Mount Kit

Morley 6500-MMK Beam Detector Multi Mount KitThe multi-mount kit allows any of the 6500 range of beam detectors to be mounted to either a wall or the ceiling. It is designed to create an additional alignment range in cases where the detector and reflector cannot be mounted within 10 alignment of each other.The kit includes the hardware necessary to mount either a single transmitter receiver unit or a single reflector. To mount the transmitterreceiver the surface mount kit 6500-SMK is also required. If both the transmitterreceiver and the reflector require additional alignment range two kits will be needed. The kit is not compatible with the long-range reflector kit.

GBP 161.11

1

Morley IAS MI-PTIR-S2I Smoke Thermal Infra-Red Detector with Isolator

Morley IAS MI-PTIR-S2I Smoke Thermal Infra-Red Detector with IsolatorThe MI-PTIR-S2 multi-criteria multi-sensor Photo Thermal Infra-Red detector is the environmentally friendly alternative to the ionisation detector a technology that is now over sixty years old. The MI-PTIR-S2 offers comparable speed of response to the ionisation technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.MI-PTIR-S2 moves the goalposts in the fight against false alarms in the core detector space by delivering enhanced false alarm immunity. In addition to being an effective alternative to ionisation units MI-PTIR-S2 offers better performance over the alternative technologies of dual angle or dual wavelength optical detectors and photo-thermal detectors.

GBP 64.83

1

Morley EVCS-HSBG Green Surface Type B Outstation

Morley EVCS-HSBG Green Surface Type B OutstationThe EVCS Type B Outstation is designed to fully comply with BS5839 for use as a Fire Telephone system Disabled Refuge Call system or as a combined system when both Fire Telephones and Disabled Refuge Points are required.The Type B Outstation is designed to be versatile compact and easy to use Refuge Call Point. This unit can be surface mounted using a simple to install bezel. When choosing the Outstation Type for use with an EVCS we recommend reading Section 11 of BS5839-92003 which deals with Outstation Types. Type B Outstations can only be used where the background noise is below 40dBA therefore there can be no sounder or Voice Alarm coverage in the area.Key FeaturesCompact designLoop output for hearing impaired usersTactile braille signage to assist partially sighted people to easily operate Refuge PointFull duplex operation allowing 2-way voice communicationHigh volume ringerStatus LEDVersatility the unit can be used on all the EVCS system

GBP 300.52

1

Morley EVCS-HSFSS Stainless Steel Type B Outstation

Morley EVCS-HSFSS Stainless Steel Type B OutstationThe EVCS Type B Outstation is designed to fully comply with BS5839 for use as a Fire Telephone system Disabled Refuge Call system or as a combined system when both Fire Telephones and Disabled Refuge Points are required. The Type B Outstation is designed to be versatile compact and easy to use Refuge Call Point.This unit can be surface mounted using a simple to install bezel. When choosing the Outstation Type for use with an EVCS we recommend reading Section 11 of BS5839-92003 which deals with Outstation Types. Type B Outstations can only be used where the background noise is below 40dBA therefore there can be no sounder or Voice Alarm coverage in the area.Key FeaturesCompact designLoop output for hearing impaired usersTactile braille signage to assist partially sighted people to easily operate Refuge PointFull duplex operation allowing 2-way voice communicationHigh volume ringerStatus LEDVersatility the unit can be used on all the EVCS system

GBP 474.01

1

Morley EVCS-HSB Red Surface Type B Outstation

Morley EVCS-HSB Red Surface Type B OutstationThe EVCS Type B Outstation is designed to fully comply with BS5839 for use as a Fire Telephone system Disabled Refuge Call system or as a combined system when both Fire Telephones and Disabled Refuge Points are required.The Type B Outstation is designed to be versatile compact and easy to use Refuge Call Point. This unit can be surface mounted using a simple to install bezel. When choosing the Outstation Type for use with an EVCS we recommend reading Section 11 of BS5839-92003 which deals with Outstation Types. Type B Outstations can only be used where the background noise is below 40dBA therefore there can be no sounder or Voice Alarm coverage in the area.Key FeaturesCompact designLoop output for hearing impaired usersTactile braille signage to assist partially sighted people to easily operate Refuge PointFull duplex operation allowing 2 way voice communicationHigh volume ringerStatus LEDVersatility the unit can be used on all the EVCS system

GBP 300.52

1

Morley CWSS-WW-W5 White Body Cool White Flash Sounder Strobe - IP65 Deep Base

Morley CWSS-WW-W5 White Body Cool White Flash Sounder Strobe - IP65 Deep BaseHoneywells Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design high output LEDs advanced optics and an innovative lens design providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet both EN54-3 and EN54-23 the Sounder Beacon delivers outstanding quality reliability and extended operational life.Key FeaturesApproved to EN54-3 and EN54-23 C W categories32 tones all approved to EN54-3Advanced optics ensure superior light coverageSynchronised flash exceeds EN54-23 standardChoice of white or red light flash optionsSoft start feature reduces power surges during system start-up

GBP 87.44

1

Morley KA-1 Steam Trap

Morley KA-1 Steam TrapIf the Honeywell Compact ASD is operated in environments where condensate can form in the pipe system then a condensate trap is used. To collect the condensate the steam trap is fitted at the lowest point of the pipe system between the air filter and the smoke detection system. Using 45 angles gives optimum wall distance.The steam trap can be operated in a temperature range of 0C to 50C. The sinter filter in the condensate trap has a pore width of 50 m and additionally absorbs coarse dust particles. The condensate trap is used in the following areas Areas of application l Areas with severely oscillating temperatures and high air humidity l External areas l Sauna areas.

GBP 280.10

1

Morley CWSS-WW-S5 Sounder VAD Beacon White Body White Flash

Morley CWSS-WW-S5 Sounder VAD Beacon White Body White FlashHoneywells Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design high output LEDs advanced optics and an innovative lens design providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet both EN54-3 and EN54-23 the Sounder Beacon delivers outstanding quality reliability and extended operational life.Key FeaturesOmni-directional light coverage eliminates need for device orientation.First fix capability allows electrical continuity testing prior to device fitting.Deep base option with multiple cable entries for flexible installation.Designed with full range of common fixing centres.Positive fit engagement and feedback of base with device for easy installation.

GBP 100.52

1

Morley CWSS-RR-W5 Sounder VAD Beacon Red Body Red Flash with Deep Base

Morley CWSS-RR-W5 Sounder VAD Beacon Red Body Red Flash with Deep BaseHoneywells Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design high output LEDs advanced optics and an innovative lens design providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet both EN54-3 and EN54-23 the Sounder Beacon delivers outstanding quality reliability and extended operational life.Key FeaturesOmni-directional light coverage eliminates need for device orientation.First fix capability allows electrical continuity testing prior to device fitting.Deep base option with multiple cable entries for flexible installation.Designed with full range of common fixing centres.Positive fit engagement and feedback of base with device for easy installation.

GBP 104.65

1

Morley CWSS-RW-S5 Sounder VAD Beacon Red Body White Flash

Morley CWSS-RW-S5 Sounder VAD Beacon Red Body White FlashHoneywells Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design high output LEDs advanced optics and an innovative lens design providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet both EN54-3 and EN54-23 the Sounder Beacon delivers outstanding quality reliability and extended operational life.Key FeaturesOmni-directional light coverage eliminates need for device orientation.First fix capability allows electrical continuity testing prior to device fitting.Deep base option with multiple cable entries for flexible installation.Designed with full range of common fixing centres.Positive fit engagement and feedback of base with device for easy installation.

GBP 94.32

1

Morley CWSS-RW-W5 Gent VAD Sounder Red Body White Flash IP65 Deep Base

Morley CWSS-RW-W5 Gent VAD Sounder Red Body White Flash IP65 Deep BaseHoneywells Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design high output LEDs advanced optics and an innovative lens design providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet both EN54-3 and EN54-23 the Sounder Beacon delivers outstanding quality reliability and extended operational life.Key FeaturesOmni-directional light coverage eliminates need for device orientation.First fix capability allows electrical continuity testing prior to device fitting.Deep base option with multiple cable entries for flexible installation.Designed with full range of common fixing centres.Positive fit engagement and feedback of base with device for easy installation.

GBP 108.78

1

Morley M210EA-CZR Analogue Addressable Monitor Module

Morley M210EA-CZR Analogue Addressable Monitor ModuleThis Analogue Addressable Monitor Module is designed for supervision of a conventional zone equipped with EOL resistor.The M200 wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility with legacy systems. The M210EA-CZ and M210EA-CZR are the latest edition to this range.The EN54-17 and EN54-18 approved Wired Input Conventional Modules allow interfacing of conventional detectors to System Sensor analogue addressable systems.The conventional zone can be powered from the analogue communication line or from an external power supply. Where the conventional zone is powered from an external power supply the communication line is fully isolated from the conventional zone and from the power supply.Key FeaturesFull backward compatibilityBuilt-in short circuit isolatorsMonitors open circuit and short circuit faultsCLIP and advanced protocolAddressability through rotary switchesTri-colour light pipesRemote reset of conventional zoneZone powered from comms line or 24V PSU

GBP 114.29

1

Brand

Merchant

Price (EUR)