32 results (0,19814 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Notifier S300PTU Programming Test Unit for PhD Detectors

Notifier S300PTU Programming Test Unit for PhD Detectors

Notifier S300PTU Programming Test Unit for PhD DetectorsThe S300PTU is a hand-held Programming Test Unit for use with the PhD range of conventional detectors.Communication is achieved via an LED and opto-diode built in to the S300PTU for close range communication. This allows direct communication via the detector LED indicator.Key FeaturesLED and opto-diode built inDesigned for use with the PhD range of conventional detectors

GBP 361.80
1

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 1026.98
1

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 1451.23
1

Notifier IDR2-A Active Repeater Panel For ID50 ID60 amp ID2000

Notifier IDR2-A Active Repeater Panel For ID50 ID60 amp ID2000

Notifier IDR2-A Active Repeater Panel For ID50 ID60 ID2000The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 855.82
1

Notifier 020-573 IDR-M Mimic Control PCA Kit

Notifier 020-573 IDR-M Mimic Control PCA Kit

Notifier 020-573 IDR-M Mimic Control PCA KitThe IDR-M Mimic Driver is part of a versatile system where mimic displays are required in association with Notifier fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a key switch input to enable evacuate silence lamp test mute and reset inputs.The IDR-M Control and Termination kit comprises a Control board and a Termination board co-located on one metal chassis. The Control board contains the processor and memory and the Termination board allows connection of power RS485 and other external signals. The Control board communicates with up to eight Mimic Driver boards.

GBP 565.40
1

Notifier 020-742 IDR-CME Compact Mimic Expansion Board

Notifier 020-742 IDR-CME Compact Mimic Expansion Board

Notifier 020-742 IDR-CME Compact Mimic Expansion BoardThe Compact Mimic is an expandable mimic suitable for standard or more complex applications where mimic displays are required in association with NOTIFIER fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a keyswitch input to enable evacuate silence lamp test mute and reset inputs.The Compact Mimic has two types of boards a main board IDR-CM and an expansion board IDR-CME both of which can have up to 16 configurable outputs. A fully utilized compact mimic system can comprise one main board and up to 9 expansion boards providing a maximum total of 160 configurable outputs.

GBP 137.09
1

Notifier 020-741 IDR-CM Compact Mimic Driver

Notifier 020-741 IDR-CM Compact Mimic Driver

Notifier 020-741 IDR-CM Compact Mimic DriverThe Compact Mimic is an expandable mimic suitable for standard or more complex applications where mimic displays are required in association with NOTIFIER fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a keyswitch input to enable evacuate silence lamp test mute and reset inputs.The Compact Mimic has two types of boards a main board IDR-CM and an expansion board IDR-CME both of which can have up to 16 configurable outputs. A fully utilized compact mimic system can comprise one main board and up to 9 expansion boards providing a maximum total of 160 configurable outputs.

GBP 428.32
1

Notifier 020-574 IDR-MD Mimic Driver amp Termination Board PCA Kit

Notifier 020-574 IDR-MD Mimic Driver amp Termination Board PCA Kit

Notifier 020-574 IDR-MD Mimic Driver Termination Board PCA KitThe IDR-M Mimic Driver is part of a versatile system where mimic displays are required in association with Notifier fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a key switch input to enable evacuate silence lamp test mute and reset inputs.The IDR-M Control and Termination kit comprises a Control board and a Termination board co-located on one metal chassis. The Control board contains the processor and memory and the Termination board allows connection of power RS485 and other external signals. The Control board communicates with up to eight Mimic Driver boards.

GBP 903.67
1

Notifier ECO1003A ECO Photoelectric Smoke Detector

Notifier ECO1003A ECO Photoelectric Smoke Detector

Notifier ECO1003A ECO Photoelectric Smoke DetectorThe ECO1003 A photoelectric smoke detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1003 A photoelectric smoke detector uses a state of the art optical chamber combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. A combination of the unique chamber design and other technically advanced features will significantly extend the service intervals before cleaning of the detector becomes necessary.A laser-based hand held Remote Test Unit can be used in conjunction with the range of ECO1000 detectors for alarm test purposes. The unit transmits a coded message preventing spurious alarms being generated by other laser-based devices. With a range of several metres the hand held test unit provides a fast and simple way of remotely alarm testing the range of ECO1000 detectors and removes the need for any direct physical access to the detector by the useThe ECO1003 A detector has an integral LED which illuminates to provide a local alarm signal. This latches on and remains illuminated until the detector is reset by a momentary power interruption. An optional remote LED annunciator may be used to repeat any alarm signal.A variety of detector bases can be used with the ECO1003 A detector providing application flexibility and compatibility with a wide range of Fire Alarm Control Panels. All bases are fitted with a shorting spring to permit circuit testing prior to fitting the detector and have a tamper resistant feature which when activated prevents removal of the detector without the use of a tool. All System Sensor products are covered by our extended 3-year warranty.Key FeaturesLow profile designLow current drawAutomatic drift compensationOperates on 12 and 24VDC SystemsRemote alarm test featureEasy MaintenanceApproved to EN54 72000Approved to MED 9698ECExtended warranty

GBP 23.45
1

Notifier ECO Photoelectric Smoke Temperature Detector ECO1002A

Notifier ECO Photoelectric Smoke Temperature Detector ECO1002A

Notifier ECO Photoelectric Smoke Temperature Detector ECO1002ASmoke and photoelectric thermal detector consists of an optical chamber sensitive to light scattering and a thermistor sensitive to heat. Alarm LED. Output for alarm repeater. Ready to test via remote control laser. CPD Certificate in accordance with EN 54 parts 5 and 7. 8-28VDC power supply. Operating temperature -20C to 60C. Relative humidity up to 95 non-condensing.Key FeaturesLow profile designLow current drawAutomatic drift compensationOperates on 12 and 24vdc systemsEasy maintenanceApproved to EN54-7Approved to MED 9698ECExtended warranty

GBP 32.62
1

Notifier SD-851EA PhD Low-Profile 800 Series Conventional Optical Smoke Detector

Notifier SD-851EA PhD Low-Profile 800 Series Conventional Optical Smoke Detector

Notifier SD-851EA PhD Low-Profile 800 Series Conventional Optical Smoke DetectorPhD low profile 800 Series conventional optical smoke detector. The SD-851E photoelectric smoke detector incorporates an optical chamber which is continually monitored by an on board processor which uses algorithms developed specifically for the unit. An alarm signal is only enabled in the detector once the processor is satisfied that a real fire has been detected thereby reducing the incidence of nuisance alarms.A variety of detector bases are available providing compatibility with a wide range of Fire Alarm Control Panels making it ideal for expansions and retrofit applications. The remote hand-held programming tool can also be used in conjunction with the PhD series of detectors to gain access to other enhanced features. The features available include readwrite last maintenance date read chamber contamination level read value of thermal element and perform an alarm test.Key FeaturesAutomatic drift compensationProgrammable SensitivityAdvanced maintenance features via remote hand-held test unitLow profile designLow current drawWide operating voltage 8 to 30VDCBi-colour LED detector status indicatorAddressable alarm location featureApproved to EN54 part 7 20003 year warrantyComes with a PROGRAMMABLE feature set removable cover insect screen LASER test and device status transmission to handheld programmer

GBP 36.42
1

Notifier M5A-RP02FG-N026-01 Addressable Call Point cw Isolator

Notifier M5A-RP02FG-N026-01 Addressable Call Point cw Isolator

Notifier M5A-RP02FG-N026-01 Addressable Call Point cw IsolatorThis Notifier Manual Call Point Break Glass Unit M5A-RP02FG-N026-01 is specifically designed to be used on Notifier Protocol Fire Alarm Control Panels. The unit is designed to give a manual signal to the Notifier Fire Alarm Control panel which will operate the fire alarm system.This unit features an integral loop isolator built into the device.These units are based on the industry standard KAC manual call point. They have been designed specifically to give installation efficiency flexibility and compliance with the latest standards.The Notifier Manal Call Point Break Glass M5A-RP02FG-N026-01 features an Integral LED. This LED will illuminate once the break glass unit has been operated. This feature allows easy identification as to which Notifier Manual Call Point Break Glass has been operated.The Notifier Manual Call Point Break Glass Unit features a unique plug and play concept that is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit. No re-termination is required.This Notifier Manual Call Point uses one of 99 possible addresses which is simply dialled in using the two rotary decade switches on the rear of the unit.A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.It is supplied as a flush mounting unit. It requires a single gang back box for surface mounting not included.Key FeaturesGlass includedRequires PS031W for surface-mounting terminal tray TB011 and single gang backbox for semi-flushing mountingUnique plug and play installation conceptFlush Mounted Call Point requires backbox for Surface Mounting Please see related products belowResettable plastic element option available not includedNotifier Analogue Addressable Protocol CommunicationsFully compliant with EN54 Part 11Backward CompatibleEnhanced AestheticsIntegral LEDIntegral Isolator

GBP 61.66
1

Notifier FD-851HTE Conventional Fixed Temperature Heat Detector 78 Deg

Notifier FD-851HTE Conventional Fixed Temperature Heat Detector 78 Deg

Notifier FD-851HTE Conventional Fixed Temperature Heat Detector 78 DegThe FD-851HTE thermal detector incorporates the latest in thermal element technology the detector provides efficient and accurate detection of fires especially in environments such as boiler houses or kitchens where smoke detectors are inappropriate due to the high level of airborne contamination. A variety of detector bases are available providing compatibility with a wide range of Fire Alarm Control Panels making it ideal for expansions and retrofit applications.The remote hand-held programming tool can also be used in conjunction with the PhD series of detectors to gain access to other enhanced features. The features available include readwrite last maintenance date read chamber contamination level read value of thermal element and perform an alarm test.Key FeaturesAutomatic drift compensationProgrammable SensitivityAdvanced maintenance features via remote hand-held test unitLow profile designLow current drawWide operating voltage 8 to 30VDCBi-colour LED detector status indicatorAddressable alarm location featureApproved to EN54 part 7 20003 Year warranty

GBP 35.29
1

Notifier FD-851REA Conventional Rate Of Rise Heat Detector

Notifier FD-851REA Conventional Rate Of Rise Heat Detector

Notifier FD-851REA Conventional Rate Of Rise Heat DetectorThe FD-851RE thermal detector incorporates the latest in thermal element technology the detector provides efficient and accurate detection of fires especially in environments such as boiler houses or kitchens where smoke detectors are inappropriate due to the high level of airborne contamination. A variety of detector bases are available providing compatibility with a wide range of Fire Alarm Control Panels making it ideal for expansions and retrofit applications.The remote hand-held programming tool can also be used in conjunction with the PhD series of detectors to gain access to other enhanced features. The features available include readwrite last maintenance date read chamber contamination level read value of thermal element and perform an alarm test.Key FeaturesAutomatic drift compensationProgrammable SensitivityAdvanced maintenance features via remote hand-held test unitLow profile designLow current drawWide operating voltage 8 to 30VDCBi-colour LED detector status indicatorAddressable alarm location featureApproved to EN54 part 7 20003 Year warranty

GBP 36.42
1

Notifier NFXI-OSI-RIE Addressable OSID-R Beam Detector - 5-100M Range

Notifier NFXI-OSI-RIE Addressable OSID-R Beam Detector - 5-100M Range

Notifier NFXI-OSI-RIE Addressable OSID-R Beam Detector - 5-100M RangeThe NFXI-OSI-RIE is an intelligent reflector- type linear optical beam smoke detector designed to operate as a component of fire alarm systems. The beam operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses atriums etc.The NFXI-OSI-RIE detector is a combined transmitterreceiver unit that can be directly connected to an intelligent detector circuit.Key FeaturesCombined transmitter and receiver unit range 5-100 m 16-328 ftAddressable model for panels utilizing Advanced Protocol or CLIP mode SLC CommunicationComplies to EN54-12Wide 12 field of viewIntuitive beam alignment indicated by directional arrowsHighly resistant to building movementResistant to large solid intruding objectsAutomatic sensitivitythreshold level setting50 horizontal and 20 vertical beam alignmentBuilt-in heaterElectronic simulated smoke test from ground levelStandby fault and alarm LED indicators visible from the front and bottomAutomatic drift compensationPaintable coverRemovable plug-in terminal blocksOptional heater kit available for the reflector

GBP 1071.53
1

Notifier SD-851TE Conventional Multi Detector

Notifier SD-851TE Conventional Multi Detector

Notifier SD-851TE Conventional Multi DetectorThe SD-851TE photoelectric smoke thermal detector incorporates an optical chamber and a thermal element which in turn are continually monitored by an on board processor by using algorithms developed specifically for the unit. An alarm signal is only enabled in the detector once the processor is satisfied that an actual fire has been detected. By using a combination of inputs the incidence of nuisance alarms is reduced while at the same time the response time to an actual fire is also improved.A variety of detector bases are available providing compatibility with a wide range of Fire Alarm Control Panels making it ideal for expansions and retrofit applications. The remote hand-held programming tool can also be used in conjunction with the PhD series of detectors to gain access to other enhanced features. The features available include readwrite last maintenance date read chamber contamination level read value of thermal element and perform an alarm test.Key FeaturesAutomatic drift compenstationProgrammable SensitivityAdvanced maintenance features via remote hand-held test unitLow profile designLow current drawWide operating voltage 8 to 30VDCBi-colour LED detector status indicatorAddressable alarm location featureApproved to EN54 part 7 20003 Year warranty

GBP 57.60
1

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 878.53
1

Notifier Local Silence Button Assembly Includes Wiring Loom NF-SIL-B

Notifier Local Silence Button Assembly Includes Wiring Loom NF-SIL-B

Notifier Advanced Alarm Management Notifier Local Silence Button Assembly Includes Wiring Loom NF-SIL-BThe NOTIFIER Local Silence Button in conjunction with the advanced programming provided by the Pearl control panel enables the use of a full BS5839 Part 1 system in applications such as assisted living retirement homes student accommodation high rise residential buildings. Often the risk of false alarm in such buildings has led to these sorts of installation being provided with individual systems for the flats linked to a landlord system for the shared area.The local silence button is a multi-position switch that allows not only sounder test and silencing but also disablement of smoke detection and the indication of disablement. As with other features it is flexible in configuration so that the facilities may be tailored to suit each site.FeaturesBest detection throughout. Allows Opal multi criteria detectors to reduce false alarms.Fully configurable. Allowing the installer to design delay periods and response times on all parts of the system in order to ensure it meets your building requirements.Flexible and simple to install. The Local Silence Button is available in a kit including wiring loom and loop moduleSupporting compliance. BS5839 Part 6 requires the alarm in each dwelling to be tested on a regular basis. This activity is logged on the Pearl system allowing landlords to check the residents are performing this task ensuring fire safety and compliance.

GBP 113.57
1

Notifier Honeywell Power Amplifier 4 x 125w 100v Class D 580242

Notifier Honeywell Power Amplifier 4 x 125w 100v Class D 580242

Notifier Honeywell Power Amplifier 4 x 125w 100v Class D 580242Four-channel power amplifier with built in battery charger for emergency power supply of VARIODYN D1 Comprio. 4XD125B has 4 independent amplifier channels each with 125 W in class D direct drive technology. Due to the fact that all amplifier channels are completely independent from each other it is possible to use one channel for back up.This could be for the other 3 channels or alternatively for other amplifier channels of other amplifiers with the same or lower output power only 4XDxxxB models. The amplifier may be used with the VARIODYN D1 Comprio as well as a DOM. It is also possible to use the amplifier with a separate PSU in this case the internal battery charger must be disabled.Key FeaturesEN 54-4 and EN 54-16 certifiedCompliant with EN 60849 and EN 50849Class D technology efficiency 80 4 independent amplifier channelsOne of four amplifier channels can be used as general back up channelOne height unitIdeal for use with the VARIODYN D1 ComprioSelf-monitoring and self-test by microcontrollerProtected against overload short circuit and overheatingSmooth and fast step-down in 1dB steps in the event of overdrive or over load24 V DC PSU for back up mains powerIntegrated battery charger according to EN 54-4 for charging batteries up to a capacity of 65 Ah 2 x 12 V 65 Ah for emergency power supply of the amplifier and one Comprio or DOMTemperature controlled variable speed fans

GBP 3463.82
1

Notifier Local Silence Button Kit NF-SIL-BKIT

Notifier Local Silence Button Kit NF-SIL-BKIT

Notifier Local Silence Button Kit NF-SIL-BKITThe NOTIFIER Local Silence Button in conjunction with the advanced programmingprovided by the Pearl control panel enables the use of a full BS5839 Part 1 system inapplications such as assisted living retirement homes student accommodation highrise residential buildings. Often the risk of false alarm in such buildings has led to thesesorts of installation being provided with individual systems for the flats linked to alandlord system for the shared area.The use of the NOTIFIER local silence button and Type-B dependency programmingnow enables full BS 5839 Part 1 systems to be installed in all areas.Type B DependencyType B dependency allows a zone to be defined for each individual flat that acts as ifit were a separate system. On receipt of an unconfirmed fire signal from a flat onlythe local alarm within the flat is given. If the alarm is confirmed by a second signal thesystem proceeds to the relevant evacuation stage general alarm or part of stagedevacuation. Alternatively if the confirmation signal is not given the system may resetautomatically without attendance by facility management staff.Local Silence ButtonThe local silence button is a multi-position switch that allows not only sounder test andsilencing but also disablement of smoke detection and the indication of disablement. Aswith other features it is flexible in configuration so that the facilities may be tailored tosuit each site.NOTIFIER NF-SIL-BKIT LOCAL SILENCE BUTTON KIT FEATURESBest detection throughout. AllowsOpal multi criteria detectors to reducefalse alarms.Fully configurable. Allowing theinstaller to design delay periods andresponse times on all parts of thesystem in order to ensure it meetsyour building requirements.Flexible and simple to install. TheLocal Silence Button is available in a kitincluding wiring loom and loop moduleSupporting compliance. BS5839 Part6 requires the alarm in each dwellingto be tested on a regular basis. Thisactivity is logged on the Pearl systemallowing landlords to check theresidents are performing this taskensuring fire safety and compliance.Local Silence of an AlarmThe user is able to silence the local sounder or sounder beacons within their premisesby pressing the Fire Alarm Silence button when a detector has activated within theirpremises. When the site is in a full evacuation mode this feature is disabled and thelocal sounder or sounder beacons cannot be silenced by the user.Local DisablementIf the user believes that they may generate an unwanted alarm from a smoke detectorwithin their premises they can press and hold the Fire Alarm Silence button for 5seconds. The yellow LED illuminates which will then disable the detection in that zoneonly for a configurable period of between 5-15 minutes in accordance with BS5839 Part 6.At the end of the configured period the zone will automatically re-enable all detectionwill be active and the LED will be extinguished.Local TestA test feature is available which allows the user to operate the sounder or sounderbeacons within the local zone by pressing and holding down the Fire Alarm Testbutton once released the sounder or sounder beacons will silence.ConnectionThe button is connected to the Pearl loop via a Notifier 21 dual input single outputinterface unit and a 5-core cable.

GBP 287.16
1