ProfitSpring | B2B PPC Agency

Notifier S300PTU Programming Test Unit for PhD Detectors

Notifier S300PTU Programming Test Unit for PhD DetectorsThe S300PTU is a hand-held Programming Test Unit for use with the PhD range of conventional detectors.Communication is achieved via an LED and opto-diode built in to the S300PTU for close range communication. This allows direct communication via the detector LED indicator.Key FeaturesLED and opto-diode built inDesigned for use with the PhD range of conventional detectors

GBP 361.80

1

Notifier SC070 Pack Of Test Keys Pack of 10

Notifier SC070 Pack Of Test Keys Pack of 10A pack of spare keys for use with KAC break glass call points.Key FeaturesPack of 10

GBP 6.17

1

Notifier IDR2-A Active Repeater Panel For ID50 ID60 amp ID2000

Notifier IDR2-A Active Repeater Panel For ID50 ID60 ID2000The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 855.82

1

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 1026.98

1

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 1451.23

1

Notifier Compact Mimic Main Board Kit PRL-MIMIC

Notifier Compact Mimic Main Board Kit PRL-MIMICCompatible with Pearl Panels.16 outputs on board and up to 9 expansion boards 020-742 can be added drive LEDs or relays giving maximum of 160 outputs. 5 LED outputs power ok Test Gen. Fault Disablement Fire and 6 Inputs Key switch Evacuate Mute Buzzer Silence Sounders Lamp Test Reset. Requires ext. 24VDC Power Source. For use with Local Zones.

GBP 394.25

1

Notifier ID3000 Extension Chassis Kit 020-559-002 Zone 65 to 128

Notifier ID3000 Extension Chassis Kit 020-559-002 Zone 65 to 128Extension chassis with Led display board for zone 65 to 128 to indicate fire and fault disablement test. Will also accept integral printer.

GBP 308.26

1

Notifier ID3000 Extension Chassis Kit 020-559-001 Zone 1 to 65

Notifier ID3000 Extension Chassis Kit 020-559-001 Zone 1 to 65Extension chassis with Led display board for zone 1 to 65 to indicate fire and fault disablement test. Will also accept integral printer.

GBP 268.51

1

Notifier ID3000 256 Zone LED Display Extension Kit 020-612

Notifier ID3000 256 Zone LED Display Extension Kit 020-612Includes 2 extension chassis with LED display boards for zones 1 to 256 to indicate fire fault disablement test. Requires double extended backbox standard or deep and 256 Zone extension cover kits 020-621-009. A printer module 020-471 cannot be added with this option.

GBP 986.42

1

Notifier 020-741 IDR-CM Compact Mimic Driver

Notifier 020-741 IDR-CM Compact Mimic DriverThe Compact Mimic is an expandable mimic suitable for standard or more complex applications where mimic displays are required in association with NOTIFIER fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a keyswitch input to enable evacuate silence lamp test mute and reset inputs.The Compact Mimic has two types of boards a main board IDR-CM and an expansion board IDR-CME both of which can have up to 16 configurable outputs. A fully utilized compact mimic system can comprise one main board and up to 9 expansion boards providing a maximum total of 160 configurable outputs.

GBP 428.32

1

Notifier 020-742 IDR-CME Compact Mimic Expansion Board

Notifier 020-742 IDR-CME Compact Mimic Expansion BoardThe Compact Mimic is an expandable mimic suitable for standard or more complex applications where mimic displays are required in association with NOTIFIER fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a keyswitch input to enable evacuate silence lamp test mute and reset inputs.The Compact Mimic has two types of boards a main board IDR-CM and an expansion board IDR-CME both of which can have up to 16 configurable outputs. A fully utilized compact mimic system can comprise one main board and up to 9 expansion boards providing a maximum total of 160 configurable outputs.

GBP 137.09

1

Notifier FSP-851 Smoke - Automatic Fire Detector Head

Notifier FSP-851 Smoke - Automatic Fire Detector HeadThe FSP-851 is plug-in type smoke sensor that combines a photoelectronic sensing chamber with addressable-analogue communications. The sensors transmit an analogue representation of smoke density over a communication line to a control panel. Rotary decade switches are provided for setting the sensors address. Two LEDs on the sensor are controlled by the panel to indicate sensor status.An output is provided for connection to an optional remote LED annunciator PN RA400ZRA100Z.Key FeaturesSleek low-profile designAddressable-analogue communicationStable communication technique with noise immunityLow standby currentTwo-wire SLC connectionCompatible with FlashScan and CLIP protocol systemsRotary decimal addressing 1-99 on CLIP systems 1-159 on FlashScan systemsOptional remote single-gang LED accessoryDual LED design provides 360 viewing angleVisible bi-colour LEDs blink green every time the detector is addressed and illuminate steady red on alarm FlashScan systems onlyRemote test feature from the panelWalk test with address display an address on 121 will blink the detector LED 12-pause-1 FlashScan systems onlyBuilt-in functional test switch activated by external magnetBuilt-in tamper-resistant featureSealed against back pressureConstructed of off-white fire-resistant plastic designed to commercial standards and offers an attractive appearance94-5V plastic flammability ratingSEMS screws for wiring of the separate baseLegacy product

GBP 55.13

1

Notifier 020-574 IDR-MD Mimic Driver amp Termination Board PCA Kit

Notifier 020-574 IDR-MD Mimic Driver Termination Board PCA KitThe IDR-M Mimic Driver is part of a versatile system where mimic displays are required in association with Notifier fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a key switch input to enable evacuate silence lamp test mute and reset inputs.The IDR-M Control and Termination kit comprises a Control board and a Termination board co-located on one metal chassis. The Control board contains the processor and memory and the Termination board allows connection of power RS485 and other external signals. The Control board communicates with up to eight Mimic Driver boards.

GBP 903.67

1

Notifier 020-573 IDR-M Mimic Control PCA Kit

Notifier 020-573 IDR-M Mimic Control PCA KitThe IDR-M Mimic Driver is part of a versatile system where mimic displays are required in association with Notifier fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a key switch input to enable evacuate silence lamp test mute and reset inputs.The IDR-M Control and Termination kit comprises a Control board and a Termination board co-located on one metal chassis. The Control board contains the processor and memory and the Termination board allows connection of power RS485 and other external signals. The Control board communicates with up to eight Mimic Driver boards.

GBP 565.40

1

Notifier ECO1003A ECO Photoelectric Smoke Detector

Notifier ECO1003A ECO Photoelectric Smoke DetectorThe ECO1003 A photoelectric smoke detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1003 A photoelectric smoke detector uses a state of the art optical chamber combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. A combination of the unique chamber design and other technically advanced features will significantly extend the service intervals before cleaning of the detector becomes necessary.A laser-based hand held Remote Test Unit can be used in conjunction with the range of ECO1000 detectors for alarm test purposes. The unit transmits a coded message preventing spurious alarms being generated by other laser-based devices. With a range of several metres the hand held test unit provides a fast and simple way of remotely alarm testing the range of ECO1000 detectors and removes the need for any direct physical access to the detector by the useThe ECO1003 A detector has an integral LED which illuminates to provide a local alarm signal. This latches on and remains illuminated until the detector is reset by a momentary power interruption. An optional remote LED annunciator may be used to repeat any alarm signal.A variety of detector bases can be used with the ECO1003 A detector providing application flexibility and compatibility with a wide range of Fire Alarm Control Panels. All bases are fitted with a shorting spring to permit circuit testing prior to fitting the detector and have a tamper resistant feature which when activated prevents removal of the detector without the use of a tool. All System Sensor products are covered by our extended 3-year warranty.Key FeaturesLow profile designLow current drawAutomatic drift compensationOperates on 12 and 24VDC SystemsRemote alarm test featureEasy MaintenanceApproved to EN54 72000Approved to MED 9698ECExtended warranty

GBP 23.45

1

Notifier PRL-BOX Extension Back Box for Pearl Panel

Notifier PRL-BOX Extension Back Box for Pearl PanelExtension back box for Pearl panel including cover space for 38Ah batteries.Key FeaturesH726mm x W447mm x D234mm

GBP 528.10

1

Notifier Honeywell PoE Injector for ETCS 583534

Notifier Honeywell PoE Injector for ETCS 583534Power supply via the Ethernet cable when no appropriate IP switch is present. Also suitable for power supply to the 583531 in cases of an unpowered ISDN cable 230 V AC 16 W incl. network cable with plug and RJ45 patch cable.

GBP 263.64

1

Notifier ECO Photoelectric Smoke Temperature Detector ECO1002A

Notifier ECO Photoelectric Smoke Temperature Detector ECO1002ASmoke and photoelectric thermal detector consists of an optical chamber sensitive to light scattering and a thermistor sensitive to heat. Alarm LED. Output for alarm repeater. Ready to test via remote control laser. CPD Certificate in accordance with EN 54 parts 5 and 7. 8-28VDC power supply. Operating temperature -20C to 60C. Relative humidity up to 95 non-condensing.Key FeaturesLow profile designLow current drawAutomatic drift compensationOperates on 12 and 24vdc systemsEasy maintenanceApproved to EN54-7Approved to MED 9698ECExtended warranty

GBP 32.62

1

Notifier Text Insert Label Kit for ID3000 020-809

Notifier Text Insert Label Kit for ID3000 020-809Text insert label kit for ID3000 series.

GBP 100.58

1

Notifier White Surface Mount Kit for OPAL Detectors SMK400EAP

Notifier White Surface Mount Kit for OPAL Detectors SMK400EAPPure white surface mount kit for Notifier OPAL detectors.

GBP 24.50

1

Notifier PRL-BEZEL Semi Flush Mounting Bezel for Pearl

Notifier PRL-BEZEL Semi Flush Mounting Bezel for PearlSemi flush mounting bezel for Notifier Pearl fire alarm control panel.

GBP 136.28

1

Notifier Honeywell Filtration Box for Racks 800mm 584947

Notifier Honeywell Filtration Box for Racks 800mm 584947Filtration box for upright cabinets with a depth of 800 mm. The filtration box is attached on the outside to the ventilation slots on the side of the upright cabinets.

GBP 163.06

1

Notifier 240x64 Pixel LCD Kit for ID3000 020-570

Notifier 240x64 Pixel LCD Kit for ID3000 020-570Replacement 240x64 pixel LCD kit designed for use with the ID3000 series panels only.

GBP 476.99

1

Notifier Extension Back Box for Pearl PRL-EXT-BOX-17

Notifier Extension Back Box for Pearl PRL-EXT-BOX-17Extension back box for existing surface mounted Pearl installations including cover panel dress plates and space for 17Ah batteries. Only one can be used with each panel and is not suitable for flush mounting.Key FeaturesH222mm W436mm D110mm

GBP 598.67

1

Notifier Spare CPU card for Pearl panel SPR-PRL-CPU

Notifier Spare CPU card for Pearl panel SPR-PRL-CPUSpare CPU card for Pearl panel

GBP 534.58

1

Brand

Merchant

Price (EUR)