53 results (0,19729 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Pferd BO 6/6 3-10MM Arbor for Snagging Wheels

Pferd BO 6/6 3-10MM Arbor for Snagging Wheels

These arbors are suited as an accessory for mounting snagging wheels on straight grinders. The arbors make a stable arrangement with a very high shank breakage resistance. The arbors can work on aluminium, cobalt-based alloys, other non-ferrous metals, high-temperature-resistant materials, nickel-based alloys (e. g. Inconell and Hasteloy), bronze, hard non-ferrous metal, titanium, titanium alloys, copper, soft non-ferrous metal, brass, zinc, stainless steel (INOX), hardened, heat-treated steels over 1,200 N/mm2 (> 38 HRC), steel materials with a hardness > 54 HRC, steel, cast steel and steels up to 1,200 N/mm. Features and Benefits Suited for use on aluminium, cobalt-based alloys, non-ferrous, high temperature resistant materials, nickel based alloys and bronze Available in two specifications to suit your needs Typical Applications Fine grinding in multiple steps with varying drive types including flexible shaft drive, power drill, column drill and straight grinder

GBP 11.39
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.1mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.1mm Steel

Spiral drill STEEL dia. 1.1 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.1 mm Flute length14 mm Length, total36 mm RPM from, grey cast iron, white cast iron2895 RPM RPM from, hard non-ferrous metals7238 RPM RPM from, soft non-ferrous metals8686 RPM RPM from, steels over 700 N/mm5790 RPM RPM from, steels up to 700 N/mm7238 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 4343 RPM RPM to, grey cast iron, white cast iron7238 RPM RPM to, hard non-ferrous metals14476 RPM RPM to, soft non-ferrous metals17371 RPM RPM to, steels over 700 N/mm7238 RPM RPM to, steels up to 700 N/mm10133 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 11581 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 12.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.7mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.7mm Steel

Spiral drill STEEL dia. 1.7 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.7 mm Flute length20 mm Length, total43 mm RPM from, grey cast iron, white cast iron1873 RPM RPM from, hard non-ferrous metals4683 RPM RPM from, soft non-ferrous metals5620 RPM RPM from, steels over 700 N/mm3747 RPM RPM from, steels up to 700 N/mm4683 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2810 RPM RPM to, grey cast iron, white cast iron4683 RPM RPM to, hard non-ferrous metals9367 RPM RPM to, soft non-ferrous metals11240 RPM RPM to, steels over 700 N/mm4683 RPM RPM to, steels up to 700 N/mm6557 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 7493 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 15.20
1

10x Pferd Twist Drill SPB DIN338 HSSG N 3.2mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 3.2mm Steel

Spiral drill STEEL dia. 3.2 mm HSS-G N DIN 338 118 universal Angle118 Diameter3.2 mm Flute length36 mm Length, total65 mm RPM from, grey cast iron, white cast iron995 RPM RPM from, hard non-ferrous metals2488 RPM RPM from, soft non-ferrous metals2986 RPM RPM from, steels over 700 N/mm1990 RPM RPM from, steels up to 700 N/mm2488 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1493 RPM RPM to, grey cast iron, white cast iron2488 RPM RPM to, hard non-ferrous metals4976 RPM RPM to, soft non-ferrous metals5971 RPM RPM to, steels over 700 N/mm2488 RPM RPM to, steels up to 700 N/mm3483 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3981 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 13.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 4.6mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 4.6mm Steel

Spiral drill STEEL dia. 4.6 mm HSS-G N DIN 338 118 universal Angle118 Diameter4.6 mm Flute length47 mm Length, total80 mm RPM from, grey cast iron, white cast iron692 RPM RPM from, hard non-ferrous metals1731 RPM RPM from, soft non-ferrous metals2077 RPM RPM from, steels over 700 N/mm1385 RPM RPM from, steels up to 700 N/mm1731 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1038 RPM RPM to, grey cast iron, white cast iron1731 RPM RPM to, hard non-ferrous metals3462 RPM RPM to, soft non-ferrous metals4154 RPM RPM to, steels over 700 N/mm1731 RPM RPM to, steels up to 700 N/mm2423 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2769 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 15.20
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.3mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.3mm Steel

Spiral drill STEEL dia. 1.3 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.3 mm Flute length16 mm Length, total38 mm RPM from, grey cast iron, white cast iron2450 RPM RPM from, hard non-ferrous metals6124 RPM RPM from, soft non-ferrous metals7349 RPM RPM from, steels over 700 N/mm4900 RPM RPM from, steels up to 700 N/mm6124 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3675 RPM RPM to, grey cast iron, white cast iron6124 RPM RPM to, hard non-ferrous metals12249 RPM RPM to, soft non-ferrous metals14699 RPM RPM to, steels over 700 N/mm6124 RPM RPM to, steels up to 700 N/mm8574 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 9799 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 12.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 4.3mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 4.3mm Steel

Spiral drill STEEL dia. 4.3 mm HSS-G N DIN 338 118 universal Angle118 Diameter4.3 mm Flute length47 mm Length, total80 mm RPM from, grey cast iron, white cast iron741 RPM RPM from, hard non-ferrous metals1852 RPM RPM from, soft non-ferrous metals2222 RPM RPM from, steels over 700 N/mm1481 RPM RPM from, steels up to 700 N/mm1852 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1111 RPM RPM to, grey cast iron, white cast iron1852 RPM RPM to, hard non-ferrous metals3703 RPM RPM to, soft non-ferrous metals4444 RPM RPM to, steels over 700 N/mm1852 RPM RPM to, steels up to 700 N/mm2592 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2963 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 16.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 2.6mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 2.6mm Steel

Spiral drill STEEL dia. 2.6 mm HSS-G N DIN 338 118 universal Angle118 Diameter2.6 mm Flute length30 mm Length, total57 mm RPM from, grey cast iron, white cast iron1225 RPM RPM from, hard non-ferrous metals3062 RPM RPM from, soft non-ferrous metals3675 RPM RPM from, steels over 700 N/mm2450 RPM RPM from, steels up to 700 N/mm3062 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1837 RPM RPM to, grey cast iron, white cast iron3062 RPM RPM to, hard non-ferrous metals6124 RPM RPM to, soft non-ferrous metals7349 RPM RPM to, steels over 700 N/mm3062 RPM RPM to, steels up to 700 N/mm4287 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 4900 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 12.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.9mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.9mm Steel

Spiral drill STEEL dia. 1.9 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.9 mm Flute length22 mm Length, total46 mm RPM from, grey cast iron, white cast iron1676 RPM RPM from, hard non-ferrous metals4190 RPM RPM from, soft non-ferrous metals5028 RPM RPM from, steels over 700 N/mm3352 RPM RPM from, steels up to 700 N/mm4190 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2514 RPM RPM to, grey cast iron, white cast iron4190 RPM RPM to, hard non-ferrous metals8381 RPM RPM to, soft non-ferrous metals10057 RPM RPM to, steels over 700 N/mm4190 RPM RPM to, steels up to 700 N/mm5867 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 6705 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 12.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 3.9mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 3.9mm Steel

Spiral drill STEEL dia. 3.9 mm HSS-G N DIN 338 118 universal Angle118 Diameter3.9 mm Flute length43 mm Length, total75 mm RPM from, grey cast iron, white cast iron817 RPM RPM from, hard non-ferrous metals2041 RPM RPM from, soft non-ferrous metals2450 RPM RPM from, steels over 700 N/mm1633 RPM RPM from, steels up to 700 N/mm2041 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1225 RPM RPM to, grey cast iron, white cast iron2041 RPM RPM to, hard non-ferrous metals4083 RPM RPM to, soft non-ferrous metals4900 RPM RPM to, steels over 700 N/mm2041 RPM RPM to, steels up to 700 N/mm2858 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3266 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 14.40
1

10x Pferd Twist Drill SPB DIN338 HSSG N 2.4mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 2.4mm Steel

Spiral drill STEEL dia. 2.4 mm HSS-G N DIN 338 118 universal Angle118 Diameter2.4 mm Flute length30 mm Length, total57 mm RPM from, grey cast iron, white cast iron1327 RPM RPM from, hard non-ferrous metals3317 RPM RPM from, soft non-ferrous metals3981 RPM RPM from, steels over 700 N/mm2654 RPM RPM from, steels up to 700 N/mm3317 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1990 RPM RPM to, grey cast iron, white cast iron3317 RPM RPM to, hard non-ferrous metals6635 RPM RPM to, soft non-ferrous metals7962 RPM RPM to, steels over 700 N/mm3317 RPM RPM to, steels up to 700 N/mm4644 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 5308 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 12.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 3.7mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 3.7mm Steel

Spiral drill STEEL dia. 3.7 mm HSS-G N DIN 338 118 universal Angle118 Diameter3.7 mm Flute length39 mm Length, total70 mm RPM from, grey cast iron, white cast iron861 RPM RPM from, hard non-ferrous metals2152 RPM RPM from, soft non-ferrous metals2582 RPM RPM from, steels over 700 N/mm1721 RPM RPM from, steels up to 700 N/mm2152 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1291 RPM RPM to, grey cast iron, white cast iron2152 RPM RPM to, hard non-ferrous metals4304 RPM RPM to, soft non-ferrous metals5164 RPM RPM to, steels over 700 N/mm2152 RPM RPM to, steels up to 700 N/mm3013 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3443 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 16.90
1