94 results (0,21182 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 100mm CO-ALU36 for Soft Non-ferrous Metals

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 100mm CO-ALU36 for Soft Non-ferrous Metals

PFERD fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fibre disc". For aggressive grinding with maximum stock removal rate for machining non-ferrous metals. Consistently high performance due to self-sharpening ceramic oxide grain. Adhesion-reducing additives in the coating significantly reduce the chip adhesion and therefore reduce clogging of the fibre discs.

GBP 39.75
1

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 100mm CO-ALU60 for Soft Non-ferrous Metals

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 100mm CO-ALU60 for Soft Non-ferrous Metals

PFERD fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fibre disc". For aggressive grinding with maximum stock removal rate for machining non-ferrous metals. Consistently high performance due to self-sharpening ceramic oxide grain. Adhesion-reducing additives in the coating significantly reduce the chip adhesion and therefore reduce clogging of the fibre discs.

GBP 32.25
1

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 115mm CO-ALU80 for Soft Non-ferrous Metals

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 115mm CO-ALU80 for Soft Non-ferrous Metals

PFERD fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fibre disc". For aggressive grinding with maximum stock removal rate for machining non-ferrous metals. Consistently high performance due to self-sharpening ceramic oxide grain. Adhesion-reducing additives in the coating significantly reduce the chip adhesion and therefore reduce clogging of the fibre discs.

GBP 39.75
1

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 100mm CO-ALU80 for Soft Non-ferrous Metals

25x Pferd Ceramic Oxide Grain Fibre Disc Diameter 100mm CO-ALU80 for Soft Non-ferrous Metals

PFERD fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fibre disc". For aggressive grinding with maximum stock removal rate for machining non-ferrous metals. Consistently high performance due to self-sharpening ceramic oxide grain. Adhesion-reducing additives in the coating significantly reduce the chip adhesion and therefore reduce clogging of the fibre discs.

GBP 29.75
1

Pferd Tungsten Carbide High-performance Burr Conical Pointed SKM Diameter 06 x 18mm Shank Diameter 6mm Z3P Hicoat Universal

Pferd Tungsten Carbide High-performance Burr Conical Pointed SKM Diameter 06 x 18mm Shank Diameter 6mm Z3P Hicoat Universal

Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs. Conical pointed burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

GBP 37.99
1

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 19mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 19mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

GBP 26.99
1

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 25mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 25mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

GBP 35.99
1

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 16.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 16.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

GBP 19.99
1

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 20.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 20.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

GBP 26.99
1

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 15mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 15mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

GBP 17.99
1

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 23mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSS Conical and Deburring Countersink Ugt 90 Diameter 23mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

GBP 33.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 15mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 15mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 19.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 23mm Shank Diameter 25mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 23mm Shank Diameter 25mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 39.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 12.4mm Shank Diameter 8mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 12.4mm Shank Diameter 8mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 19.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 16.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 16.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 20.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 19mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 19mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 29.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 25mm Shank Diameter 25mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 25mm Shank Diameter 25mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 41.99
1

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 20.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Pferd HSSE CO5 Conical and Deburring Countersink 90 Diameter 20.5mm Shank Diameter 10mm DIN 335 C with Unequal Pitch

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. High-performance tools with a countersink angle of 90 for countersinking 90 screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

GBP 30.99
1

10x Pferd Twist Drill SPB DIN338 HSSG N 3.8mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 3.8mm Steel

Spiral drill STEEL dia. 3.8 mm HSS-G N DIN 338 118 universal Angle118 Diameter3.8 mm Flute length43 mm Length, total75 mm RPM from, grey cast iron, white cast iron838 RPM RPM from, hard non-ferrous metals2095 RPM RPM from, soft non-ferrous metals2514 RPM RPM from, steels over 700 N/mm1676 RPM RPM from, steels up to 700 N/mm2095 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1257 RPM RPM to, grey cast iron, white cast iron2095 RPM RPM to, hard non-ferrous metals4190 RPM RPM to, soft non-ferrous metals5028 RPM RPM to, steels over 700 N/mm2095 RPM RPM to, steels up to 700 N/mm2933 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3352 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 26.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 8.1mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 8.1mm Steel

Spiral drill STEEL dia. 8.1 mm HSS-G N DIN 338 118 universal Angle118 Diameter8.1 mm Flute length75 mm Length, total117 mm RPM from, grey cast iron, white cast iron393 RPM RPM from, hard non-ferrous metals983 RPM RPM from, soft non-ferrous metals1180 RPM RPM from, steels over 700 N/mm786 RPM RPM from, steels up to 700 N/mm983 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 590 RPM RPM to, grey cast iron, white cast iron983 RPM RPM to, hard non-ferrous metals1966 RPM RPM to, soft non-ferrous metals2359 RPM RPM to, steels over 700 N/mm983 RPM RPM to, steels up to 700 N/mm1376 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1573 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 41.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.4mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.4mm Steel

Spiral drill STEEL dia. 1.4 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.4 mm Flute length18 mm Length, total40 mm RPM from, grey cast iron, white cast iron2275 RPM RPM from, hard non-ferrous metals5687 RPM RPM from, soft non-ferrous metals6824 RPM RPM from, steels over 700 N/mm4550 RPM RPM from, steels up to 700 N/mm5687 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3412 RPM RPM to, grey cast iron, white cast iron5687 RPM RPM to, hard non-ferrous metals11374 RPM RPM to, soft non-ferrous metals13649 RPM RPM to, steels over 700 N/mm5687 RPM RPM to, steels up to 700 N/mm7962 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 9099 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 25.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.8mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.8mm Steel

Spiral drill STEEL dia. 1.8 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.8 mm Flute length22 mm Length, total46 mm RPM from, grey cast iron, white cast iron1769 RPM RPM from, hard non-ferrous metals4423 RPM RPM from, soft non-ferrous metals5308 RPM RPM from, steels over 700 N/mm3539 RPM RPM from, steels up to 700 N/mm4423 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2654 RPM RPM to, grey cast iron, white cast iron4423 RPM RPM to, hard non-ferrous metals8846 RPM RPM to, soft non-ferrous metals10616 RPM RPM to, steels over 700 N/mm4423 RPM RPM to, steels up to 700 N/mm6192 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 7077 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 25.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 7.4mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 7.4mm Steel

Spiral drill STEEL dia. 7.4 mm HSS-G N DIN 338 118 universal Angle118 Diameter7.4 mm Flute length69 mm Length, total117 mm RPM from, grey cast iron, white cast iron430 RPM RPM from, hard non-ferrous metals1076 RPM RPM from, soft non-ferrous metals1291 RPM RPM from, steels over 700 N/mm861 RPM RPM from, steels up to 700 N/mm1076 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 646 RPM RPM to, grey cast iron, white cast iron1076 RPM RPM to, hard non-ferrous metals2152 RPM RPM to, soft non-ferrous metals2582 RPM RPM to, steels over 700 N/mm1076 RPM RPM to, steels up to 700 N/mm1506 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1721 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 36.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 4.9mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 4.9mm Steel

Spiral drill STEEL dia. 4.9 mm HSS-G N DIN 338 118 universal Angle118 Diameter4.9 mm Flute length53 mm Length, total86 mm RPM from, grey cast iron, white cast iron650 RPM RPM from, hard non-ferrous metals1625 RPM RPM from, soft non-ferrous metals1950 RPM RPM from, steels over 700 N/mm1300 RPM RPM from, steels up to 700 N/mm1625 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 975 RPM RPM to, grey cast iron, white cast iron1625 RPM RPM to, hard non-ferrous metals3250 RPM RPM to, soft non-ferrous metals3900 RPM RPM to, steels over 700 N/mm1625 RPM RPM to, steels up to 700 N/mm2275 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2600 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 29.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 5.4mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 5.4mm Steel

Spiral drill STEEL dia. 5.6 mm HSS-G N DIN 338 118 universal Angle118 Diameter5.4 mm Flute length57 mm Length, total93 mm RPM from, grey cast iron, white cast iron590 RPM RPM from, hard non-ferrous metals1474 RPM RPM from, soft non-ferrous metals1769 RPM RPM from, steels over 700 N/mm1180 RPM RPM from, steels up to 700 N/mm1474 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 885 RPM RPM to, grey cast iron, white cast iron1474 RPM RPM to, hard non-ferrous metals2949 RPM RPM to, soft non-ferrous metals3539 RPM RPM to, steels over 700 N/mm1474 RPM RPM to, steels up to 700 N/mm2064 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2359 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 30.90
1