11 results (0,14742 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

10x Pferd Twist Drill SPB DIN338 HSSG N 6.1mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 6.1mm Steel

Spiral drill STEEL dia. 6.1 mm HSS-G N DIN 338 118 universal Angle118 Diameter6.1 mm Flute length63 mm Length, total101 mm RPM from, grey cast iron, white cast iron522 RPM RPM from, hard non-ferrous metals1305 RPM RPM from, soft non-ferrous metals1566 RPM RPM from, steels over 700 N/mm1044 RPM RPM from, steels up to 700 N/mm1305 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 783 RPM RPM to, grey cast iron, white cast iron1305 RPM RPM to, hard non-ferrous metals2610 RPM RPM to, soft non-ferrous metals3133 RPM RPM to, steels over 700 N/mm1305 RPM RPM to, steels up to 700 N/mm1827 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2088 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 42.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 2.4mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 2.4mm Steel

Spiral drill STEEL dia. 2.4 mm HSS-G N DIN 338 118 universal Angle118 Diameter2.4 mm Flute length30 mm Length, total57 mm RPM from, grey cast iron, white cast iron1327 RPM RPM from, hard non-ferrous metals3317 RPM RPM from, soft non-ferrous metals3981 RPM RPM from, steels over 700 N/mm2654 RPM RPM from, steels up to 700 N/mm3317 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1990 RPM RPM to, grey cast iron, white cast iron3317 RPM RPM to, hard non-ferrous metals6635 RPM RPM to, soft non-ferrous metals7962 RPM RPM to, steels over 700 N/mm3317 RPM RPM to, steels up to 700 N/mm4644 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 5308 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 34.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.7mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.7mm Steel

Spiral drill STEEL dia. 1.7 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.7 mm Flute length20 mm Length, total43 mm RPM from, grey cast iron, white cast iron1873 RPM RPM from, hard non-ferrous metals4683 RPM RPM from, soft non-ferrous metals5620 RPM RPM from, steels over 700 N/mm3747 RPM RPM from, steels up to 700 N/mm4683 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2810 RPM RPM to, grey cast iron, white cast iron4683 RPM RPM to, hard non-ferrous metals9367 RPM RPM to, soft non-ferrous metals11240 RPM RPM to, steels over 700 N/mm4683 RPM RPM to, steels up to 700 N/mm6557 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 7493 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 34.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 2.6mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 2.6mm Steel

Spiral drill STEEL dia. 2.6 mm HSS-G N DIN 338 118 universal Angle118 Diameter2.6 mm Flute length30 mm Length, total57 mm RPM from, grey cast iron, white cast iron1225 RPM RPM from, hard non-ferrous metals3062 RPM RPM from, soft non-ferrous metals3675 RPM RPM from, steels over 700 N/mm2450 RPM RPM from, steels up to 700 N/mm3062 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1837 RPM RPM to, grey cast iron, white cast iron3062 RPM RPM to, hard non-ferrous metals6124 RPM RPM to, soft non-ferrous metals7349 RPM RPM to, steels over 700 N/mm3062 RPM RPM to, steels up to 700 N/mm4287 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 4900 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 34.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.1mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.1mm Steel

Spiral drill STEEL dia. 1.1 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.1 mm Flute length14 mm Length, total36 mm RPM from, grey cast iron, white cast iron2895 RPM RPM from, hard non-ferrous metals7238 RPM RPM from, soft non-ferrous metals8686 RPM RPM from, steels over 700 N/mm5790 RPM RPM from, steels up to 700 N/mm7238 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 4343 RPM RPM to, grey cast iron, white cast iron7238 RPM RPM to, hard non-ferrous metals14476 RPM RPM to, soft non-ferrous metals17371 RPM RPM to, steels over 700 N/mm7238 RPM RPM to, steels up to 700 N/mm10133 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 11581 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 34.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 1.3mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 1.3mm Steel

Spiral drill STEEL dia. 1.3 mm HSS-G N DIN 338 118 universal Angle118 Diameter1.3 mm Flute length16 mm Length, total38 mm RPM from, grey cast iron, white cast iron2450 RPM RPM from, hard non-ferrous metals6124 RPM RPM from, soft non-ferrous metals7349 RPM RPM from, steels over 700 N/mm4900 RPM RPM from, steels up to 700 N/mm6124 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3675 RPM RPM to, grey cast iron, white cast iron6124 RPM RPM to, hard non-ferrous metals12249 RPM RPM to, soft non-ferrous metals14699 RPM RPM to, steels over 700 N/mm6124 RPM RPM to, steels up to 700 N/mm8574 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 9799 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 34.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 5.6mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 5.6mm Steel

Spiral drill STEEL dia. 5.4 mm HSS-G N DIN 338 118 universal Angle118 Diameter5.6 mm Flute length57 mm Length, total93 mm RPM from, grey cast iron, white cast iron569 RPM RPM from, hard non-ferrous metals1422 RPM RPM from, soft non-ferrous metals1706 RPM RPM from, steels over 700 N/mm1137 RPM RPM from, steels up to 700 N/mm1422 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 853 RPM RPM to, grey cast iron, white cast iron1422 RPM RPM to, hard non-ferrous metals2843 RPM RPM to, soft non-ferrous metals3412 RPM RPM to, steels over 700 N/mm1422 RPM RPM to, steels up to 700 N/mm1990 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2275 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 40.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 2.7mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 2.7mm Steel

Spiral drill STEEL dia. 2.7 mm HSS-G N DIN 338 118 universal Angle118 Diameter2.7 mm Flute length33 mm Length, total61 mm RPM from, grey cast iron, white cast iron1180 RPM RPM from, hard non-ferrous metals2949 RPM RPM from, soft non-ferrous metals3539 RPM RPM from, steels over 700 N/mm2359 RPM RPM from, steels up to 700 N/mm2949 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1769 RPM RPM to, grey cast iron, white cast iron2949 RPM RPM to, hard non-ferrous metals5898 RPM RPM to, soft non-ferrous metals7077 RPM RPM to, steels over 700 N/mm2949 RPM RPM to, steels up to 700 N/mm4128 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 4718 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 34.90
1

10x Pferd Twist Drill SPB DIN338 HSSG N 3.8mm Steel

10x Pferd Twist Drill SPB DIN338 HSSG N 3.8mm Steel

Spiral drill STEEL dia. 3.8 mm HSS-G N DIN 338 118 universal Angle118 Diameter3.8 mm Flute length43 mm Length, total75 mm RPM from, grey cast iron, white cast iron838 RPM RPM from, hard non-ferrous metals2095 RPM RPM from, soft non-ferrous metals2514 RPM RPM from, steels over 700 N/mm1676 RPM RPM from, steels up to 700 N/mm2095 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1257 RPM RPM to, grey cast iron, white cast iron2095 RPM RPM to, hard non-ferrous metals4190 RPM RPM to, soft non-ferrous metals5028 RPM RPM to, steels over 700 N/mm2095 RPM RPM to, steels up to 700 N/mm2933 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 3352 RPM Spiral angle, from25 Spiral angle, to30 VersionSTEEL Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the STEEL in HSSG (M2) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Suitable for general use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium. Easy centring. Long tool life. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard non-ferrous metal Hardwood Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 35.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 1.8 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 1.8 Inox

Spiral drill INOX dia. 1.8 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter1.8 mm Flute length22 mm Length, total46 mm RPM from, grey cast iron, white cast iron1769 RPM RPM from, hard non-ferrous metals4423 RPM RPM from, rust and acid-resistant steels1769 RPM RPM from, soft non-ferrous metals5308 RPM RPM from, steels over 700 N/mm3539 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2654 RPM RPM to, grey cast iron, white cast iron4423 RPM RPM to, hard non-ferrous metals8846 RPM RPM to, rust and acid-resistant steels3539 RPM RPM to, soft non-ferrous metals10616 RPM RPM to, steels over 700 N/mm4423 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 7077 RPM Spiral angle, from36 VersionINOX Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 41.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 2.2 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 2.2 Inox

echnical information Spiral drill INOX dia. 2.2 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter2.2 mm Flute length27 mm Length, total53 mm RPM from, grey cast iron, white cast iron1448 RPM RPM from, hard non-ferrous metals3619 RPM RPM from, rust and acid-resistant steels1448 RPM RPM from, soft non-ferrous metals4343 RPM RPM from, steels over 700 N/mm2895 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 2171 RPM RPM to, grey cast iron, white cast iron3619 RPM RPM to, hard non-ferrous metals7238 RPM RPM to, rust and acid-resistant steels2895 RPM RPM to, soft non-ferrous metals8686 RPM RPM to, steels over 700 N/mm3619 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 5790 RPM Spiral angle, from36 VersionINOX Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 40.90
1