648 results (0,21989 seconds)

Show all filters

Brand

Colour

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

RAU Workbench, Melamine Coated Worktop, Light Grey RAL 7035

RAU Workbench, Melamine Coated Worktop, Light Grey RAL 7035

Workbench, melamine coated worktop, light grey RAL 7035. Supplied = assembled. Worktop width = 1250 mm. Worktop depth = 700 mm. Type of worktop = melamine coated panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = welded rectangular steel tubing, 45x45 mm. Frame colour = light grey RAL 7035. Sturdy, hardwearing welded construction. Distributed load up to max. 1250 kg. Delivered assembled - ready for immediate use. Series 8000 workbench - model 8000 Width x depth x height 1250 x 700 x 840 mm. Worktop with melamine resin coating, thickness 40 mm, top and bottom with a light grey melamine resin direct coating in accordance with DIN 68765. Splashproof and dirt-resistant, surface properties in accordance with EN 14322/EN 14323: Abrasion resistance class 3A, scratch resistance >1.5 N, stain resistance grade 3 (e.g. acetone, alcohol, organic solvents, petroleum ether) , susceptibility to cracking grade 3, reaction to cigarette burns grade 3, reaction to water vapour grade 4. Certificate of non-objection covering reasonable migration, therefore also making it suitable for use in the food sector. Coating with normally flammability (B2) in accordance with DIN 4102. Panel core made of moulded chipboard in accordance with EN 309/EN 312 (emission class E1) Light grey on all sides, antistatic ABS edge. 4 foot welded frame with two pairs of frame feet made of tubular steel profile (45 x 45 x 2 mm) incl. cross struts (top and bottom) Frame feet at bottom with end element incl. non-slip stud for a stable footing. Cross struts of C-profile (40 x 40 x 2 mm) at the top underneath the worktop (front and rear) and shelf at the bottom (depth 650 mm, flush with bottom of system frame at rear, shelf height 620 mm) Provision has been made on the frame feet for the adding/retrofitting a height adjustment mechanism and/or a set of castors. Powder coating. Max. distributed load 1250 kg. Delivered assembled - ready for immediate use.

GBP 849.99
1

RAU System Upright Set, 2 System Uprights, For Work Table Width 1250mm

RAU System Upright Set, 2 System Uprights, For Work Table Width 1250mm

System upright set, 2 system uprights, for work table width 1250 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 1250 mm. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 1250 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 529.99
1

RAU System Upright Set, 2 System Uprights, For Work Table Width 750mm

RAU System Upright Set, 2 System Uprights, For Work Table Width 750mm

System upright set, 2 system uprights, for work table width 750 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 750 mm. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 750 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 509.99
1

RAU System Upright Set, 4 System Uprights, For Work Table Width 2000mm

RAU System Upright Set, 4 System Uprights, For Work Table Width 2000mm

System upright set, 4 system uprights, for work table width 2000 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 2000 mm. Number of uprights = 4 pcs. Max. load = 100 kg. Bay width = 1000 + 1000/750 + 1250 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 929.99
1

RAU System Upright Set, 4 System Uprights, For Work Table Width 3000mm

RAU System Upright Set, 4 System Uprights, For Work Table Width 3000mm

System upright set, 4 system uprights, for work table width 3000 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 3000 mm. Number of uprights = 4 pcs. Max. load = 100 kg. Bay width = 1500 + 1500 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 999.99
1

RAU System Upright Set, 2 System Uprights, For Work Table Width 1500mm

RAU System Upright Set, 2 System Uprights, For Work Table Width 1500mm

System upright set, 2 system uprights, for work table width 1500 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 1500 mm. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 1500 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 529.99
1

RAU System Upright Set, 4 System Uprights, For Work Table Width 2500mm

RAU System Upright Set, 4 System Uprights, For Work Table Width 2500mm

System upright set, 4 system uprights, for work table width 2500 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 2500 mm. Number of uprights = 4 pcs. Max. load = 100 kg. Bay width = 1250 + 1250 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 929.99
1

RAU System Upright Set, 2 System Uprights, For Work Table Width 2000mm

RAU System Upright Set, 2 System Uprights, For Work Table Width 2000mm

System upright set, 2 system uprights, for work table width 2000 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 2000 mm. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 2000 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 529.99
1

RAU System Upright Set, 2 System Uprights, For Work Table Width 1000mm

RAU System Upright Set, 2 System Uprights, For Work Table Width 1000mm

System upright set, 2 system uprights, for work table width 1000 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 1000 mm. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 1000 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 509.99
1

RAU System Upright Set, 4 System Uprights, For Work Table Width 1500mm

RAU System Upright Set, 4 System Uprights, For Work Table Width 1500mm

System upright set, 4 system uprights, for work table width 1500 mm. Supplied = flat pack. Colour = light grey RAL 7035. For table width = 1500 mm. Number of uprights = 4 pcs. Max. load = 100 kg. Bay width = 750 + 750 mm. Effective height = 1130 mm. Product type = accessories for workbenches. Allows accessories to be attached to suitable work tables and workbenches. Mounted at the rear - the worktop remains tidy. Consists of cross member welded under the worktop at the factory, and aluminium system supports (40 x 40 mm) Depending on the table width, panels with widths of 750/1000/1250/1500/2000 mm can be fitted. You can find work tables and workbenches suitable for this system under Combinations. For securing accessories to the work tables. Consists of assembly kit (cross member, which is welded to the frame under the tabletop at the factory) and supports (aluminium profiles 40 x 40 mm, are bolted to the assembly kit) Max. load 100 kg. Effective height 1130 mm. Please note Only suitable for RAU work tables/workbenches or selected EUROKRAFTpro workbenches. Can only be retrofitted in certain cases. As a rule, the supports are welded to the table frame at the factory. We will be happy to advise you. The work surface remains open, as accessories are not mounted directly to the worktop. System uprights can be used on all sides.

GBP 899.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 2000mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 2000mm

Workbench, frame construction, 1 cross strut, depth 900 mm, width 2000 mm. Supplied = assembled. Worktop width = 2000 mm. Worktop depth = 900 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 1599.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 1500mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 1500mm

Workbench, frame construction, 1 cross strut, depth 900 mm, width 1500 mm. Supplied = assembled. Worktop width = 1500 mm. Worktop depth = 900 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 1399.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 1250mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 1250mm

Workbench, frame construction, 1 cross strut, depth 900 mm, width 1250 mm. Supplied = assembled. Worktop width = 1250 mm. Worktop depth = 900 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 1199.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 1000mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 1000mm

Workbench, frame construction, 1 cross strut, depth 700 mm, width 1000 mm. Supplied = assembled. Worktop width = 1000 mm. Worktop depth = 700 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 829.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 2000mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 2000mm

Workbench, frame construction, 1 cross strut, depth 700 mm, width 2000 mm. Supplied = assembled. Worktop width = 2000 mm. Worktop depth = 700 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 1199.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 1000mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 900mm, Width 1000mm

Workbench, frame construction, 1 cross strut, depth 900 mm, width 1000 mm. Supplied = assembled. Worktop width = 1000 mm. Worktop depth = 900 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 1129.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 1250mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 1250mm

Workbench, frame construction, 1 cross strut, depth 700 mm, width 1250 mm. Supplied = assembled. Worktop width = 1250 mm. Worktop depth = 700 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 899.99
1

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 1500mm

RAU Workbench, Frame Construction, 1 Cross Strut, Depth 700mm, Width 1500mm

Workbench, frame construction, 1 cross strut, depth 700 mm, width 1500 mm. Supplied = assembled. Worktop width = 1500 mm. Worktop depth = 700 mm. Type of worktop = solid beech wooden panel. Panel thickness = 40 mm. Height = 840 mm. Working height = 840 mm. Body colour = light grey RAL 7035. Frame material = steel, powder coated. Static distributed load = 1250 kg. Frame design = 45x45 mm rectangular tubing. Frame colour = light grey RAL 7035. Work surface with high max. load due to beams under the tabletop. Depending on the model, drawers with high max. load (100 kg) on ball bearing mounted guides. Straight worktop edges make it possible to set up in rows. Delivered assembled - ready for immediate use. Extensive range of accessories available - can be extended to form a multipurpose workplace. Frame and housing: light grey RAL 7035. Support beams for additional strength and stability. With cross strut. Delivered assembled - ready for immediate use. Available at no extra charge: 15 colours - up to 225 colour combinations Your advantage High load capacity due to support beams. Straight worktop edges make it possible to set up in rows.

GBP 1029.99
1

RAU Complete Modular System Set 1, For Workbench, Width 1250mm

RAU Complete Modular System Set 1, For Workbench, Width 1250mm

Complete modular system set 1, for workbench, width 1250 mm. Supplied = flat pack. Width = 1250 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 1250 mm. Material = aluminium, wood, sheet steel. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 1250 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 1199.99
1

RAU Complete Modular System Set 1, For Workbench, Width 2500mm

RAU Complete Modular System Set 1, For Workbench, Width 2500mm

Complete modular system set 1, for workbench, width 2500 mm. Supplied = flat pack. Width = 2500 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 2500 mm. Material = aluminium, wood, sheet steel. Number of uprights = 4 pcs. Max. load = 100 kg. Bay width = 2x1250 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 2299.99
1

RAU Complete Modular System Set 1, For Workbench, Width 2000mm

RAU Complete Modular System Set 1, For Workbench, Width 2000mm

Complete modular system set 1, for workbench, width 2000 mm. Supplied = flat pack. Width = 2000 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 2000 mm. Material = aluminium, wood, sheet steel. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 2000 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 1499.99
1

RAU Complete Modular System Set 1, For Workbench, Width 750mm

RAU Complete Modular System Set 1, For Workbench, Width 750mm

Complete modular system set 1, for workbench, width 750 mm. Supplied = flat pack. Width = 750 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 750 mm. Material = aluminium, wood, sheet steel. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 750 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 999.99
1

RAU Complete Modular System Set 1, For Workbench, Width 3000mm

RAU Complete Modular System Set 1, For Workbench, Width 3000mm

Complete modular system set 1, for workbench, width 3000 mm. Supplied = flat pack. Width = 3000 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 3000 mm. Material = aluminium, wood, sheet steel. Number of uprights = 4 pcs. Max. load = 100 kg. Bay width = 2x1500 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 2499.99
1

RAU Complete Modular System Set 1, For Workbench, Width 1000mm

RAU Complete Modular System Set 1, For Workbench, Width 1000mm

Complete modular system set 1, for workbench, width 1000 mm. Supplied = flat pack. Width = 1000 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 1000 mm. Material = aluminium, wood, sheet steel. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 1000 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 1099.99
1

RAU Complete Modular System Set 1, For Workbench, Width 1500mm

RAU Complete Modular System Set 1, For Workbench, Width 1500mm

Complete modular system set 1, for workbench, width 1500 mm. Supplied = flat pack. Width = 1500 mm. Depth = 350 mm. Colour = light grey RAL 7035. For table width = 1500 mm. Material = aluminium, wood, sheet steel. Number of uprights = 2 pcs. Max. load = 100 kg. Bay width = 1500 mm. Effective height = 1130 mm. Height = 1400 mm. Product type = accessories for workbenches. Suitable for RAU workbenches/work tables and selected EUROKRAFTpro workbenches. Ergonomics, tidiness and organisation at the workplace. All interior fittings and attachment parts are adjustable in height. Easy to add to or expand. Indispensable for the implementation of LEAN management methods. The complete modular system set 1 includes: - 1 x fastening set (cross bar) with 2 system uprights - 1 x perforated panel (height 650 mm) with square system perforation to integrate tool holders and accessories - 1 x shelf (depth 300 mm) , melamine coated panel - 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip Each component of the set is included twice with the 2500 and 3000 mm workbench widths. The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The 2 system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop) The system uprights feature a profile groove on all 4 sides to allow use from all sides. This modular system is designed for RAU workbenches/work tables and selected EUROKRAFTpro workbenches, and cannot be connected to workbenches made by other manufacturers When placing an order without an appropriate workbench, it is imperative to specify for which series the modular elements are intended.

GBP 1249.99
1