ProfitSpring | B2B PPC Agency

Ringtail X-XLP-BRASSOPTION Add On For Brass Rim Finish

Ringtail X-XLP-BRASSOPTION Add On For Brass Rim FinishAn add on for a brass rim finish for XLP emergency lighting.

GBP 21.65

1

Ringtail X-XLP-CHROMEOPTION Add On For Chrome Rim Finish

Ringtail X-XLP-CHROMEOPTION Add On For Chrome Rim FinishAn add on for a chrome rim finish for XLP emergency lighting.

GBP 21.65

1

Ringtail X-ES-BRASSOPTION Brass Option For ES Range

Ringtail X-ES-BRASSOPTIONBrass Option For ES RangeBrass option for ES Range.

GBP 79.22

1

Ringtail X-MP-BRASSOPTION Add On For Brass Finish MP Range

Ringtail X-MP-BRASSOPTION Add On For Brass Finish MP Range An add on for the MP range. Key FeaturesBrass option

GBP 39.91

1

Ringtail X-MPS3LRBEZ Recess Kit For X-MPS3L cw Retaining Springs

Ringtail X-MPS3LRBEZ Recess Kit For X-MPS3L cw RetainingSpringsA Recess Kit designed for use with the X-MPS3L. Key FeaturesComes with retaining springs

GBP 29.98

1

X-FM LED 230v Mains Recessed Luminaire

X-FM LED 230v Mains Recessed LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protectionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 103.58

1

X-FM LED 3 Hour Maintained DALI Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained DALI Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 180.85

1

X-FM LED 3 Hour Maintained Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 70.63

1

X-FM LED 3 Hour Maintained Self Testing Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained Self Testing Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 122.58

1

X-ER 230v LED Mains Weatherproof Luminaire

X-ER 230v LED Mains Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish optionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 87.05

1

Emergency Lighting X-FM3SL24 LED Slave Recessed Emergency Luminaire 24V ACDC

Emergency Lighting X-FM3SL24 LED Slave Recessed Emergency Luminaire 24V ACDCThis Central Battery slave luminaire is designed for full recess-mounting in ceilings with only 10mm protrusion. Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. Available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Please note that these LED central battery lights do not contain a battery.

GBP 91.01

1

Emergency Lighting X-FM3SL50 LED Slave Recessed Emergency Luminaire 50V ACDC

Emergency Lighting X-FM3SL50LED Slave Recessed Emergency Luminaire 50V ACDCThis Central Battery slave luminaire is designed for full recess-mounting in ceilings with only 10mm protrusion. Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. Available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Please note that these LED central battery lights do not contain a battery.

GBP 94.61

1

Emergency Lighting X-FM3SL110 LED Slave Recessed Emergency Luminaire 110V ACDC

Emergency Lighting X-FM3SL110 LED Slave Recessed Emergency Luminaire 110V ACDCThis Central Battery slave luminaire is designed for full recess-mounting in ceilings with only 10mm protrusion. Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. Available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Please note that these LED central battery lights do not contain a battery.

GBP 101.92

1

X-MP LED 230v Mains Hanging Blade Exit Sign

X-MP LED 230v Mains Hanging Blade Exit SignThe X-MP Light is a decorativechain suspended edge-illuminated escape route and direction sign.Comprising a white finished base and suspended gear enclosure on chrome chain the X-MP Light is fitted with a BS7010 legend panel. The unit is designed for chain suspension and a chrome effect chain is provided. Cable entry is by a BESA entry in the base.The X-MP Light is white as standard and is also available in alternative finishes including British Standard RAL colour black polished brass chrome and satin finishes.Key FeaturesChain Suspended 400mm dropSurface mountHigh output LED light sourceIP20Chrome and white finishes availableChoice of LegendSwitchable maintained unitDALI and Self-Test optionsAlternative colour and finishes availablePlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 161.16

1

X-SR LED 230v Mains Anti-Ligature Luminaire

X-SR LED 230v Mains Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinningPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 198.23

1

X-CS3 LED 230v Mains LED IP65 Bulkhead

X-CS3 LED 230v Mains LED IP65 BulkheadThe X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal ExternalPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 66.53

1

X-MPR LED 230v Mains Blade Exit Sign

X-MPR LED 230v Mains Blade Exit SignA compact recessed exit sign.TheX-MPRis a decorative illuminated escape route and direction sign light. Using high illumination white LEDs in a small compact shell with self-test facility. It is designed to be recess mounted in ceilings allowing escape route lighting to be provided in a low profile.Comprising of a stove enamelled sheet steel base fitted with a white bezel suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL. The bezel is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base.Key FeaturesRecess mount escape route signHigh output LED light sourceIP20Many alternative finishes availableChoice of LegendSelf containedPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 115.48

1

X-ERS LED 230v Mains Square Weatherproof Luminaire

X-ERS LED 230v Mains Square Weatherproof LuminaireA quality decorative luminaire designed for use by architects and designers. Comprising of a moulded self-extinguishing polycarbonate base fitted with a clear diffuser suitable for use on escape routes. The X-ERS Light offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish optionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 87.05

1

X-SR LED 3 Hour Maintained DALI Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained DALI Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinning

GBP 295.16

1

X-SR LED 3 Hour Maintained Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinning

GBP 252.78

1

X-ER LED 3 Hour Maintained Round Weatherproof Luminaire

X-ER LED Maintained Round Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish option

GBP 144.79

1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91

1

X-CS3M LED Maintained DALI Bulkhead IP65

X-CS3M LED Maintained DALI Bulkhead IP65 The X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 141.62

1

X-XLP LED 230v Mains Decorative Luminaire

X-XLP LED 230v Mains Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individualityPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 83.95

1

X-MP LED 3 Hour Maintained DALI Hanging Blade Exit Sign

X-MP LED 3 Hour Maintained DALI Hanging Blade Exit SignThe X-MP Light is a decorativechain suspended edge-illuminated escape route and direction sign.Comprising a white finished base and suspended gear enclosure on chrome chain the X-MP Light is fitted with a BS7010 legend panel. The unit is designed for chain suspension and a chrome effect chain is provided. Cable entry is by a BESA entry in the base.The X-MP Light is white as standard and is also available in alternative finishes including British Standard RAL colour black polished brass chrome and satin finishes.Key FeaturesChain Suspended 400mm dropSurface mountHigh output LED light sourceIP20Chrome and white finishes availableChoice of LegendSwitchable maintained unitDALI and Self-Test optionsAlternative colour and finishes available

GBP 240.67

1

Brand

Merchant

Price (EUR)