ProfitSpring | B2B PPC Agency

X-ER LED 3 Hour Maintained Self-Test Round Weatherproof Luminaire

X-ER LED 3 Hour Maintained Self-Test Round Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish option

GBP 150.80

1

X-ES LED 3 Hour Maintained Self Test Exit Box

X-ES LED 3 Hour Maintained Self Test Exit BoxThe X-ES Light is a general purpose LED wall mounted emergency escape route sign.Comprising a white stove-enamelled zintec-coated sheet steel base and fitted with a self-extinguishing legend panel the X-ES Light is designed for use on escape routes. It conforms to the 850C hot-wire test as defined by ICEL.The X-ES Light has cable knockouts which are provided in the sides and the top.Key FeaturesIP20 Interior UseEscape Route SignHigh Output LED Light SourceChoice of LegendColour Options and Brass or Chrome VersionsSelf-Contained34m Viewing Distance

GBP 111.49

1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91

1

X-CS3M LED Maintained DALI Bulkhead IP65

X-CS3M LED Maintained DALI Bulkhead IP65 The X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 141.62

1

X-SR LED 3 Hour Maintained DALI Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained DALI Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinning

GBP 295.16

1

X-SR LED 3 Hour Maintained Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinning

GBP 252.78

1

X-SR LED 3 Hour Maintained Self Testing Anti-Ligature Luminaire

X-SR LED 3 Hour Maintained Self Testing Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinning

GBP 262.76

1

X-CS3 LED 230v Mains LED IP65 Bulkhead

X-CS3 LED 230v Mains LED IP65 BulkheadThe X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal ExternalPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 66.53

1

X-XLP LED 3 Hour Maintained Decorative Luminaire

X-XLP LED 3 Hour Maintained Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individuality

GBP 139.38

1

X-MPR LED 3 Hour Maintained DALI Blade Exit Sign

X-MPR LED 3 Hour Maintained DALI Blade Exit SignA compact recessed exit sign.TheX-MPRis a decorative illuminated escape route and direction sign light. Using high illumination white LEDs in a small compact shell with self-test facility. It is designed to be recess mounted in ceilings allowing escape route lighting to be provided in a low profile.Comprising of a stove enamelled sheet steel base fitted with a white bezel suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL. The bezel is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base.Key FeaturesRecess mount escape route signHigh output LED light sourceIP20Many alternative finishes availableChoice of LegendSelf contained

GBP 191.84

1

X-XLP LED 3 Hour Maintained DALI Decorative Luminaire

X-XLP LED 3 Hour Maintained DALI Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individuality

GBP 180.41

1

X-SR LED 230v Mains Anti-Ligature Luminaire

X-SR LED 230v Mains Anti-Ligature LuminaireThe X-SR Light is a circular anti ligature vandal resistant luminaire suitable for interior environments.Comprising of spun aluminium housing with a polycarbonate opal diffuser suitable for use on escape routes 850 C Hot-Wire test defined by ICEL. The diffuser is held in place by a security screw fixed rim which fits flush to the ceiling. The X-SR Light offers aneffective solution for harsh environmentswhere both mains and emergency lighting is required.Key FeaturesAnti-ligatureHigh lumen outputLow power consumption4000k Colour temperatureIP40DALI and Self-Test optionsCentral Battery and Static inverter systemsPowder coated aluminium spinningPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 198.23

1

X-XLP LED 3 Hour Maintained Self Testing Decorative Luminaire

X-XLP LED 3 Hour Maintained Self Testing Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individuality

GBP 147.60

1

X-MPR LED 3 Hour Maintained Blade Exit Sign

X-MPR LED 3 Hour Maintained Blade Exit SignA compact recessed exit sign.TheX-MPRis a decorative illuminated escape route and direction sign light. Using high illumination white LEDs in a small compact shell with self-test facility. It is designed to be recess mounted in ceilings allowing escape route lighting to be provided in a low profile.Comprising of a stove enamelled sheet steel base fitted with a white bezel suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL. The bezel is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base.Key FeaturesRecess mount escape route signHigh output LED light sourceIP20Many alternative finishes availableChoice of LegendSelf contained

GBP 82.86

1

X-MPR LED 3 Hour Maintained Self Testing Blade Exit Sign

X-MPR LED 3 Hour Maintained Self Testing Blade Exit SignA compact recessed exit sign.TheX-MPRis a decorative illuminated escape route and direction sign light. Using high illumination white LEDs in a small compact shell with self-test facility. It is designed to be recess mounted in ceilings allowing escape route lighting to be provided in a low profile.Comprising of a stove enamelled sheet steel base fitted with a white bezel suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL. The bezel is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base.Key FeaturesRecess mount escape route signHigh output LED light sourceIP20Many alternative finishes availableChoice of LegendSelf contained

GBP 133.34

1

Emergency Lighting X-ES3SL50 LED Slave Exit Box 50V ACDC

Emergency Lighting X-ES3SL50 LED Slave Exit Box 50V ACDCThe X-ES3 is a general purpose LED escape route exit sign that is switchable MaintainedNon-maintained self-contained. Designed to be wall mounted Self-contained.It is available in LED Self-Test DALI Addressable and Wireless Communication.Central Battery slave units in 24v 50v 110v and 230v ACDC Static Inverters.

GBP 89.02

1

X-ER LED 3 Hour Maintained Round Weatherproof Luminaire

X-ER LED Maintained Round Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish option

GBP 144.79

1

Emergency Lighting X-CS3SL50 LED Slave IP65 Bulkhead 50V ACDC

Emergency Lighting X-CS3SL50 LED Slave IP65 Bulkhead 50V ACDCThe X-CS3 light is a high light output emergency bulkhead with the added benefit of utilising LEDs.It is available in LED Self-Test DALI Addressable and Wireless Communication.Central Battery slave units in 24v50v110v and 230v ACDC Static Inverters.Hold-off Relay Photo Cell Black and White finishes available with Recess Kit and ULK Universal Legend Kit.

GBP 63.28

1

X-ER LED 3 Hour Maintained DALI Round Weatherproof Luminaire

X-ER LED 3 Hour Maintained DALI Round Weatherproof LuminaireThe X-ER is a quality luminaire for areas of general amenity lighting. This luminaire offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish option

GBP 182.92

1

Emergency Lighting X-CS3SL24 LED Slave IP65 Bulkhead 24V ACDC

Emergency Lighting X-CS3SL24 LED Slave IP65 Bulkhead 24V ACDCThe X-CS3 light is a high light output emergency bulkhead with the added benefit of utilising LEDs.It is available in LED Self-Test DALI Addressable and Wireless Communication.Central Battery slave units in 24v50v110v and 230v ACDC Static Inverters.Hold-off Relay Photo Cell Black and White finishes available with Recess Kit and ULK Universal Legend Kit.

GBP 59.88

1

X-FM LED 3 Hour Maintained Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 70.63

1

X-XLP LED 230v Mains Decorative Luminaire

X-XLP LED 230v Mains Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individualityPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 83.95

1

X-FM LED 3 Hour Maintained DALI Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained DALI Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 180.85

1

X-MPR LED 230v Mains Blade Exit Sign

X-MPR LED 230v Mains Blade Exit SignA compact recessed exit sign.TheX-MPRis a decorative illuminated escape route and direction sign light. Using high illumination white LEDs in a small compact shell with self-test facility. It is designed to be recess mounted in ceilings allowing escape route lighting to be provided in a low profile.Comprising of a stove enamelled sheet steel base fitted with a white bezel suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL. The bezel is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base.Key FeaturesRecess mount escape route signHigh output LED light sourceIP20Many alternative finishes availableChoice of LegendSelf containedPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard exit sign.

GBP 115.48

1

X-FM LED 3 Hour Maintained Self Testing Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained Self Testing Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 122.58

1

Brand

Merchant

Price (EUR)